Wml75011hv-1 Parts

The Turntable Motor is an OEM part for Whirlpool microwaves. This motor is responsible for rotating the microwave turntable, ensuring even heating of food by allowing it to rotate during the cooking process. It is located beneath the turntable and engages with the turntable coupler to facilitate smooth rotation. Installation of this motor may need a Torx driver. If a small stud is present in the center of the Torx screw, a security torx bit will be necessary for the replacement of those screws. 

Causes of a bad turntable motor can include wear and tear from regular use, electrical failures, or physical damage due to overloading or mishandling. These issues can result in the turntable not rotating properly, leading to uneven heating.

Symptoms of a bad turntable motor include:

• Turntable not rotating
• Uneven cooking or heating of food
• Unusual noises coming from the motor area
• The microwave displaying error codes related to the turntable

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

*** Note: This glass tray has 3 triangles to engage the coupler. In some cases, the factory used a tray that has 3 partial-circles. For that glass tray use part# 4393799. ***

The Glass Tray is an OEM part for Whirlpool built-in microwaves. This heat-resistant glass plate helps distribute incoming microwave energy evenly throughout cooking cycles. 

Causes include normal thermal stress cracks from rapidly changing microwave temperatures daily. Accidental impact damage is also possible if rack assemblies are mishandled.

Symptoms of a problematic glass tray include:

• Inconsistent or inadequate microwaving of certain foods
• Hotter or cooler areas noticed depending on placement
• Visible corrosion, cracks or pitting of the tray surface over time
• Sparking, arcing or strange noises from inside the microwave cavity

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This is a thermal safety fuse that opens the circuit if temperatures rise beyond a safe limit, protecting the appliance from overheating and preventing further damage. Replacing a failed fuse restores power to the affected circuit once the underlying cause is addressed.

• Monitors temperature in a protected circuit and cuts power if unsafe heat is detected
• Helps prevent overheating-related damage
• Typical failure signs: no power/no operation, cycle won't start, shuts off mid-cycle after overheating event
• Must not be bypassed; replace if open and investigate the root cause of overheating

• Unplug appliance or disconnect power before service
• Verify the fuse is open with a multimeter; replace only after correcting any airflow/overheating issues
• Install in the same orientation and location as the original to ensure proper temperature sensing
• Handle wiring carefully; transfer connectors one at a time to avoid miswiring

The Air Damper is an OEM part for Whirlpool microwave/range hood combos. It is a crucial component that regulates the flow of air into the microwave cavity, helping to maintain proper temperature and airflow during operation.

Symptoms of a faulty Air Damper include:

• Overheating or uneven heating of food items
• Excessive noise or rattling sounds during operation
• Error codes related to temperature or airflow issues

Causes of a bad Air Damper can include wear and tear over time, physical damage or obstruction, or issues with the damper's motor or control system.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore microwave models.

The Diode is an OEM part for Whirlpool microwaves. The diode plays a key role in regulating power flow and protecting other sensitive components from voltage fluctuations.

Causes of a bad microwave diode can include component failure due to age or heat exposure over time. Diodes are also susceptible to electrical damage if exposed to power surges.

Symptoms of a bad diode can include:

• The microwave failing to power on or having intermittent power
• Food not heating up properly or unevenly
• Strange sounds like buzzing or humming emanating from inside
• The door lock mechanism not engaging or release properly
• Repeated tripping of fuses or circuit breakers

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Hardware Kit is an OEM part for Whirlpool microwaves. This kit includes essential mounting brackets, screws, and other fasteners required for the proper installation and secure mounting of the microwave, either over the range or within cabinetry.

Causes of a bad hardware kit can include wear and tear over time, exposure to moisture, or damage due to mishandling or incorrect installation.  

Symptoms of a bad hardware kit include:

• Loose or unstable microwave installation
• Rattling or vibrating noises during operation
• Difficulty in mounting or securing the microwave
• Visible rust or damage to screws and brackets

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The INTERLOCK ASSEMBLY is an OEM component specifically designed for Whirlpool brand over-the-range microwaves. It incorporates safety features that prevent the microwave door from opening unless the internal motor and fan have powered down fully.

Symptoms of a bad interlock assembly can include wear from repeated door openings over time. Damage due to splatter from cooking presents another risk factor.

Causes of a bad interlock assembly involve: 

• The ability to open the door prematurely before internal components stop running
• Failure to sense when the door is properly latched or shut securely
• Inoperative locking mechanisms that do not engage reliably

Replacing it with this genuine Whirlpool part restores crucial safety functions. Dependable controls streamline cooking while minimizing potential hazards. 

This OEM Whirlpool replacement interlock assembly is also compatible with KitchenAid, Jenn-Air, and some Kenmore over-the-range microwave models. Reliable protection secures proper usage cycle after cycle.
 

The Turntable Ring is an OEM part for Whirlpool microwaves. It serves as a rotating platform that holds food during the cooking process. The turntable ring works with the turntable motor to revolve, ensuring food is heated evenly from all sides.

Causes of a bad turntable ring can include cracks, chips or breaks developing over time. Grease or food particles accumulated in the motor coupling area may also cause issues.

Symptoms of a bad turntable ring include:

• The ring not rotating smoothly during cooking cycles
• Loud grinding or scraping noises coming from inside the oven
• Food not heating evenly after cooking
• Blackening or burning on one side of food

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Filter is an OEM component for Whirlpool microwave/hood combo units. Positioned above the cooktop, this aluminum mesh filter captures smoke, grease, and smells before being exhausted outside. 

Causes of a bad filter include normal grease and grime buildup from cooking and dishwashing cycles.

Symptoms of a bad filter include:

• Reduced suction power and airflow  
• Lingering odors inside the kitchen
• Dirty or clogged filter surface
• Grease residue collecting on walls and cabinets below

The OEM Whirlpool part is also compatible with Jenn-Air, KitchenAid, and select Kenmore models as well.

The Microwave Charcoal Filter is an OEM part compatible with Whirlpool microwave ovens. It is a crucial component responsible for absorbing and eliminating odors and fumes generated during the cooking process.

Causes of a bad charcoal filter can include prolonged use and exposure to odors, which can eventually lead to the filter becoming saturated and less effective at absorbing smells.

Symptoms of a faulty or expired Microwave Charcoal Filter include:

• Persistent and lingering food odors after cooking
• Decreased effectiveness in removing smoke or fumes
• Discoloration or visible buildup on the filter surface
• Reduced air flow or ventilation efficiency

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore microwave oven models, ensuring a perfect fit and optimal performance for your specific appliance.

This magnetron capacitor is the microwave high-voltage capacitor that helps supply the magnetron with the pulse of energy needed to produce heat. Replacing a failing capacitor restores normal heating performance and reduces arcing or loud humming. What it does

• Stores and releases the high-voltage pulse required by the magnetron so the microwave can generate heat.
• Prevents unstable magnetron operation that can cause weak or no heating.
• Common symptoms of a failing capacitor: oven runs but doesn't heat, intermittent heating, loud buzzing/humming, or visible arcing inside the cavity.
• A failed capacitor can also cause blown internal fuses or tripped circuits.

• One capacitor.

• Disconnect power and verify the appliance is completely de-energized before servicing.
• Capacitors can hold dangerous charge; discharge the capacitor safely with an insulated tool.
• Use the exact replacement part and follow the appliance service manual for routing and connections.

The Mounting Nut Assembly is an OEM replacement part for Whirlpool microwaves. It securely fastens the microwave to its mounting bracket, ensuring stability and safety during operation. It provides a secure and reliable connection, preventing the microwave from shifting or falling during use.

A bad mounting nut can occur due to various reasons, such as wear and tear, improper installation, or accidental damage. If you notice symptoms such as the microwave becoming loose or wobbly, or if the mounting nut is missing or damaged, it may be time to replace it.

Symptoms of a bad microwave installation mounting nut include:

• Microwave becoming loose or wobbly
• Missing or damaged mounting nut

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Color: Grey

A small mounting spacer that keeps components aligned and prevents abrasion inside your appliance. Replacing a cracked or missing spacer restores proper clearance, helping reduce noise and premature wear on nearby parts. What it does:

• Positions and supports adjacent parts to maintain correct spacing and alignment
• Prevents metal-on-metal contact and rubbing that can cause noise or damage
• Helps maintain smooth operation of moving components by reducing friction
• Commonly replaced when a spacer is cracked, deformed, or missing

• Disconnect power (and water, if applicable) before servicing the appliance
• Note the spacer orientation and location before removal so the replacement installs the same way
• Basic hand tools are typically required; handle small parts carefully to avoid loss

The Control Board is an OEM part for Whirlpool over-the-range microwaves. It houses the electronic components and circuitry that allow for operation of power levels, cook times, sensors and other microwave functions. 

Causes of a bad control board include failures in moisture-sensitive circuitry due to heat or steam exposure over time as well as potential physical impacts that disrupt connectivity. 

Symptoms include:

• Non-responsive buttons and controls  
• Inability to power on or operate cooking modes
• Fault codes appearing or sensors malfunctioning
• Improper power output disrupting cooking results

This OEM Whirlpool replacement is also compatible with KitchenAid, RCA, Crosley, Admiral and some Kenmore built-in microwave models.

The Magnetron is an OEM part for Whirlpool microwaves. As a main cooking component, it produces microwave energy for safe, fast food reheating and preparation. 

Symptoms of a bad magnetron include:

• Slow or inefficient cooking needs increased time   
• Uneven heating causes cold or hot spots in dishes
• High-pitched humming or crackling from within the unit  
• Diminished or no power delivery for intended functions

Causes can be regular usage wear degrading magnets and tubes over time, sudden impact or power surges potentially damaging circuitry, or failures of microwave-generating elements.

This OEM Whirlpool part is also compatible with some Kenmore and Magic Chef.