Wte86300us Parts

This replacement ring fits in its designated location within your appliance to secure or space components so they operate smoothly and stay aligned. Replacing a worn or missing ring helps restore proper fit and prevent looseness and noise. What it does:

• Positions or retains a mating part within the assembly
• Maintains correct alignment/clearance between components
• Helps reduce vibration and wear from parts rubbing
• Common clues of a bad or missing ring: loose/wobbly component, rattling, misalignment, or visible damage

• 1 ring

• Disconnect power and shut off water or gas, if applicable, before servicing
• Refer to your model's service manual for access steps and orientation
• Note the ring's position before removal; seat the new ring fully and evenly
• Inspect related parts for wear and replace if damaged

The Temperature regulator is an OEM replacement part for Bosch dryers. It is a temperature-sensitive resistor located inside the dryer cabinet that monitors air temperatures throughout drying cycles. The thermistor provides continuous feedback to the control board.

Causes of a faulty thermistor tend to involve gradual sensor drift or physical damage due to extensive exposure to moisture fluctuations and mechanical vibrations inside the drum. Mineral scale buildup could also interfere with resistance readings over time.

Symptoms comprise:

• Inability for the temperature regulator to accurately detect sleeve air temperature
• Fluctuating or inconsistent drying temperatures between loads
• Thermal runaway triggering high-limit cut-offs or error codes
• Prolonged drying times stemming from control faults

This OEM Bosch part is also compatible with Thermador, Gaggenau and some Kenmore models.

The Bearing is an OEM part for Bosch dryers. It is a component located within the drum assembly that works to smoothly rotate the drying tumbler during the cycle.                                                         

Symptoms of a bad bearing include:                                                        

• Loud grinding or scraping noises coming from the dryer drum area                                                        
• The dryer drum fails to rotate or gets stuck during the operation                                                
• Vibrations felt in the dryer cabinet or presenting during the operation

Over time, the constant rotation of the dryer drum can cause wear and tear on the bearings. Accidental damage during maintenance or cleaning is also possible. If any of the above issues occur, it may be time to replace this bearing.                                                        

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

Thermister

The Dryer Lint Filter is an OEM component specifically designed for Bosch dryers. Located inside the dryer door, it prevents lint and other debris from escaping into the surrounding area. 

Symptoms of a bad dryer lint filter include:

• Reduced airflow and inefficient drying times  
• Lint accumulation inside the dryer drum and ductwork
• Excess lint in the surrounding area and on clothes 

Causes of a bad lint filter can include normal wear and tear over time, or damage such as cracks or tears that compromise filtration. Failure to clean after each use also contributes to eventual clogging.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The condensation pump is an OEM part compatible with Bosch dryers. It plays a crucial role in removing the condensed water from the dryer during the drying cycle, ensuring efficient and proper operation.

Symptoms of a bad dryer pump include:

• Water leakage from the dryer
• Excessive moisture or dampness in the drum after a cycle
• Loud or unusual noises during operation
• Error codes or indicators related to drainage issues

Causes of a bad pump can range from clogs or obstructions in the drainage system, worn-out seals or bearings within the pump, or electrical malfunctions that prevent the pump from functioning correctly.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dryer models.

The Heater Element is an OEM component specifically designed for Bosch dryers. As a key heating component, the heater element works to warm up the air inside the dryer drum and facilitate the drying process. 

Causes of a bad heater element include damage due to age, overheating, or cracks in the heating coil. This can result in inefficient or ineffective heating.

Symptoms of a bad heater element include: 

• Longer drying times 
• Clothes not fully drying after a cycle
• An occasional burning smell from the dryer
• The dryer not heating at all

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

The Cover is an OEM part for Bosch dryers. It provides an additional seal over the removable lint filter compartment inside the dryer cabinet.

Causes of a bad filter cover can be general wear and stress from repeated removal and replacement of the lint filter over extended use. Heat cycling during drying may also cause plastic material fatigue and impact integrity.

Symptoms of a bad dryer filter cover include:

• Cracks, warping or holes in the material compromising the seal
• Inability to properly protect the internal lint filter from accumulation
• Excessive airflow and circulation that impacts drying efficiency

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Foot is an OEM component specifically designed for select Bosch dryers. It securely elevates the appliance above the floor for ventilation purposes. Rigid plastic construction supports weight distribution evenly during cycles.

Causes of a bad foot can involve normal wear from long-term appliance positioning. Exposure to moisture or impacts posing cracking and weakening risks over time necessitate replacement.

Causes of a bad foot include:

• Dryer is unstable and rocks or sways more than usual
• Scratches or damage to flooring surfaces it contacts
• Uneven drying performance from improper elevation

Symptoms of a bad foot include collapsed or unstable base structure inhibiting dependable operation. Timely replacement ensures correct height positioning.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dryers. Replace to properly elevate your unit and maximize airflow circulation.
 

The Drive Belt is an OEM part for Bosch dryers. It works to transfer power from the dryer motor to the drum, helping rotate and tumble clothes during the drying cycle.

Causes of a bad drive belt usually come down to regular use over several years. Infrequent belt replacement intervals can lead to premature failure.

Symptoms of a bad drive belt can include:

• The dryer not starting or not completing full cycles
• Loud squealing or slipping noises coming from the dryer
• Visible cracking, fraying, or looseness of the belt

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Belt Drive is an OEM part for Bosch dryers. It provides power transmission from the motor to the drum through its durable, stretch-resistant belt. Precise alignment of the belt is crucial for smooth, efficient operation.

Symptoms of a bad belt drive include slipping, squealing noises, or vibrations during use. The belt may show signs of cracking, stretching, or looseness. 

Causes can be normal wear over many cycles of use, overloading the dryer with too many wet items, or accidentally impacting or bending internal components.

Causes of a bad belt drive include:

• Misalignment placing undue stress on the belt or pulleys
• Stretching, cracking, or loosening of the belt over time
• Damage to the belt from snags or debris caught in the mechanism

This OEM Bosch part is also compatible with some Kenmore, Maytag, and Whirpool dryers. Replace yours today for quiet, dependable performance.
 

The Wheel is an OEM part for Bosch clothes dryers. It is an essential component that works with the drum to tumble clothes, facilitating effective drying action during cycles.

Wheels can cause shorts and come loose over time from heavy drum usage, leading to:

• Vibrating, shaking noises 
• Difficulty spinning the dryer drum by hand
• Stretching or pilling of clothes  
• Unerwven drying performance

Causes of a faulty wheel tend to be wear and tear over time from carrying heavy loads inside a spinning drum. Foreign objects inside the drum can also potentially cause damage.

It is also compatible with some Thermador, Gaggenau, and Kenmore dryer models.

The Limiter-Temperature is an OEM component specifically designed for select Bosch vented dryers requiring controlled heat. As a safety device, it restricts air exiting the exhaust to prevent accidental ignition of accumulated lint.

Precisely calibrated mechanothermal links automatically trip circuit breakers upon exceeding preset levels. Isolated housings shield reactive alloys from moisture while enabling thermodynamics to naturally trigger protective functions. 

Causes requiring replacement involve over-heating from sustained over-drying preventing auto-stops. Physical damage exposing reactive cores could also impair intended response times.

Symptoms signaling the need for a new temperature limiter include:

• Inability to sense rising exhaust temperatures activating cutoffs
• Constantly energized heating elements lacking temperature regulation  
• Excessively long or uncontrolled dry cycles posing combustion risks

This OEM Bosch replacement component is also compatible with some Gaggenau, Thermador, and select Kenmore dryers employing sensitive temperature cutoffs. Correct installation restores critical overheat protection circuits.
 

This door window frame surrounds and supports the glass window in the appliance door. It secures the window and hardware so the door closes and latches properly, restoring a clean appearance and solid, rattle-free operation.

• Holds the door glass in place as part of the door assembly
• Provides mounting points for screws/clips and trim pieces
• Helps maintain alignment between the door, hinge, and latch
• Replace if the frame is cracked/warped, tabs are broken, the window feels loose, or latching becomes difficult

• Disconnect power before servicing; allow the unit to cool if recently used
• Support the door, remove fasteners, and separate the old frame carefully to avoid stressing the glass
• Transfer the door glass and any clips/screws to the new frame; ensure any gasket seats evenly if present
• Reassemble and test that the door closes and latches smoothly

The High Limit Thermostat is an OEM part for Bosch clothes dryers. It functions as a crucial safety component by monitoring the dryer's internal temperature and disconnecting power to prevent overheating if temperatures become excessively high.  

Symptoms of a bad high-limit thermostat include:

• The dryer failing to start or run cycles completely  
• Cycles terminating prematurely
• Excessive warmth or heat emitting from the dryer cabinet
• Error codes related to temperature issues

Causes can include wear and failure of the electronic controls or temperature sensor over time from repeated heating and cooling. Exposure to extended high heat conditions may also potentially damage thermostatic components. 

This part is compatible with Thermador, Gaggenau, and some Kenmore dryer models as well.

This replacement cover restores a secure, finished closure over its designated opening, helping protect internal components from dust, moisture, and accidental contact. Replace a cracked, loose, or missing cover to maintain proper protection, fit, and appearance.

• Shields internal parts and wiring from debris and accidental contact
• Helps maintain proper sealing and airflow where applicable
• Common signs to replace: cracked, warped, broken tabs, or cover won't stay attached
• Can reduce rattling or vibration noises caused by a loose panel

• Disconnect power; if the appliance is plumbed, turn off water supply before service
• Use the correct driver to remove/replace retaining screws or clips; note orientation
• Transfer any reusable fasteners or grommets from the old part
• Do not overtighten; ensure a flush, secure fit before restoring power