Your privacy choices: We and our partners use cookies for analytics and ads. Decline all turns them off.
Privacy Policy · Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement fastener screw for appliances. Secures panels, trim, clips, and components. Needed when original screws are stripped, missing, or damaged.
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on... Read more
Cabinet roller axle supports refrigerator wheels for smooth movement. Replace if rollers wobble or fridge is hard to move. Verify fit with your model.
Left side wheels damaged from tenant running over floor register. Replaced all 4-rollers in rear and front of the refrigerator. Appliance Parts repair video was important to the success of the replacement. Read more
Supports the refrigerator door at the bottom pivot point. Replace if your hinge is rusted, bent, cracked, or broken to restore proper door alignment.
Looked up parts on internet using diagrams, ordered parts, they arrived in 2 days and installed them. Read more
Magnetic door gasket creates an airtight seal to keep cold air in. Replace if worn, cracked, or not sealing properly to maintain temperature and efficiency.
Vertical duct that channels cold air from the evaporator through cabinet vents. Replace if cracked, broken, or blocked to restore proper airflow distribution.
Replaced the motor and fan blade. Read more
Cleaned the slide areas really well and ordered new drawers. Read more
Crisper drawer won't adjust humidity? This slide moves the vent door to regulate moisture in your produce bin. Snap-in replacement restores humidity control.
Metal support bar that mounts to the refrigerator liner to hold the crisper cover frame and glass level. Replace if broken, missing, or bent.
I had to cut down the length of the bar using a Dremel so that it would fit into the channels, it was originally too wide to fit into the fridge. One thing to note, only cut it as wide as the actual fridge; you can get it into the plastic shelf structure by sliding it too much into one side, and then guiding it into the other side. Read more
This is the toe kick grille that mounts at the bottom front of the refrigerator, covering the condenser area and allowing airflow while providing a finished appearance. It snaps or clips into place along the base of the unit. Replace this grille if it is cracked, broken, discolored, or if the mounting clips have snapped off and it no longer stays in place.
I was able to order the parts from appliance parts pros quickly and it was easy to find the right parts and watch the videos on how to install them (mainly the drawer tracker). I'm very happy with my order. :) Read more
Protective thimble bushing that reinforces the hinge pin mounting hole in your freezer door liner. Replace if worn, cracked, or missing to stabilize hardware.
Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8... Read more
Replaces the upper butt hinge assembly that mounts to the cabinet and supports your freezer or refrigerator door. Needed when hinge is cracked or worn.
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Replaced It With New One Read more
Stops refrigerator fan rattling and buzzing noise. This rubber grommet cushions the fan motor to reduce vibration. Simple DIY fix, takes under 30 minutes.
Ordered the parts from you guys, evaporator fan motor, fan blade, and new grommets. unscrewed the inside back panel of the freezer, removed the old fan, installed the new one. Read more
Refrigerator not cooling properly? A clogged filter drier prevents proper refrigerant flow. Requires professional installation due to sealed system.
Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly. Read more
This is the frame that covers the top of the crisper drawers in a refrigerator, serving as a support shelf and helping to separate the crisper compartment from the rest of the fresh food section. It maintains proper airflow and humidity levels around the crisper drawers for better produce storage. Replace this cover frame if it is cracked, broken, or warped, which can cause items to fall through or reduce the effectiveness of the crisper drawers.
This is an electromechanical defrost timer that controls the automatic defrost cycle in a refrigerator. It periodically switches the compressor off and activates the defrost heater to melt frost buildup on the evaporator coils. Replace this timer if your refrigerator is not defrosting properly, frost is building up excessively on the back wall of the freezer, or the compressor runs continuously without cycling into defrost mode.
I replaced the Thermostat and Defrost Timer. It was a fairly easy repair other than removing the old Defrost Timer. The way the manufacturer, in this case, Amana, mounts that unit with "clips" is just poor design and engineering. It is virtually impossible to get the timer out without damaging the mounts. I had to do some creative rework to mount the new timer. After 2 days, the fridge appears to be working properly with these new parts. The new parts were shipped Very Fast...APP is... Read more
Opt-Out Request Honored
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.