Awm290w2 Parts

Can be upper or lower bearing depending on application.

This 12-14 x 1/2 screw is a factory fastener used to secure appliance panels, brackets, and components. Replacing a missing or stripped screw restores a tight fit, reduces rattling, and keeps parts properly aligned for reliable operation.

• Secures panels, brackets, and internal components to their mounting points
• Replaces damaged, rusted, or missing hardware
• Helps stop vibration and rattling caused by loose fasteners
• Restores proper alignment and stability of covers or assemblies

• Disconnect power and, if applicable, shut off gas/water before servicing
• Match the original screw's location and length; replace one at a time
• Start threads by hand to prevent cross-threading; tighten snugly without over-torquing
• Reinstall any original washers, clips, or spacers used with the screw

Size: 10-32

This rubber drain-hose sleeve protects and secures the washer drain hose where it passes through the cabinet or connects to the outlet. It helps prevent chafing and keeps the hose seated to reduce leaks and movement. What it does:

• Cushions the drain hose to prevent wear from rubbing against sharp edges
• Keeps the hose properly positioned at the cabinet or drain connection
• Helps reduce water leaks caused by hose abrasion or poor seating
• Useful when replacing a cracked, torn, or missing sleeve

• Turn off power and water supply before accessing the drain hose area
• Remove the washer top or access panel as needed to reach the hose pathway
• Slide the sleeve into place over the hose and seat it through the cabinet opening or connection
• Inspect adjacent hose and clamps; replace if damaged or worn to ensure a secure fit

This standpipe adapter connects the appliance drain hose to the household standpipe or waste outlet, helping ensure a secure drain path and reduce the risk of leaks or poor drainage. Simple replacement for damaged or worn connectors. What it does:

• Provides a sealed connection between the appliance drain hose and the standpipe or drain outlet
• Prevents water leaks at the hose-to-standpipe junction
• Helps maintain proper drainage and reduces gurgling or slow-draining symptoms
• Durable plastic construction designed to resist cracking and wear under normal use

• One standpipe adapter

• Turn off and unplug the appliance and stop water flow before replacing the adapter
• Remove the old adapter and clean the mating surfaces; ensure the hose and standpipe are free of debris
• Slide the drain hose onto the adapter fully and secure with the proper clamp or retainer
• If you find cracks in nearby hoses or fittings, replace those parts as needed and test for leaks after installation

This spring hook tool helps remove and reinstall suspension and drive springs safely and precisely, making spring service or drum suspension work easier and more controlled for technicians and DIYers. What it does:

• Provides a secure hook for grabbing and manipulating washer/dryer springs
• Helps install or remove springs during suspension, tub, or agitator repairs
• Reduces risk of spring slippage compared with improvised tools
• Useful when addressing noisy, off-balance, or uneven-spinning washers caused by spring or suspension issues

• Always disconnect power and water supply before servicing appliances
• Wear eye protection and gloves; springs are under tension and can snap back
• Use the tool only for its intended spring tasks and follow OEM service procedures

This mixing valve controls and directs hot and cold water into the washer to produce the desired fill temperature for each cycle. Replaces a worn or leaking inlet control to restore correct water selection and filling behavior. What it does:

• Directs hot and cold water to create the set wash or rinse temperature
• Opens and closes water flow during fill cycles so the tub fills to the correct level
• Commonly replaced for leaking, no-fill, or incorrect-temperature symptoms
• Works as the washer's water inlet/mixing control within the water valve assembly

• One mixing valve assembly (single unit as shown)

• Disconnect power and shut off both hot and cold water supplies before servicing
• Handle gently; avoid bending or stressing inlet ports and electrical connectors
• Verify hose and connector condition when reinstalling; tighten fittings to prevent leaks

This 5/16-18 x 3/4 machine bolt replaces a missing or damaged fastener used to secure panels, brackets and components in many home appliances. It restores proper fit and helps stop rattling or loose parts. What it does:

• Secures panels, brackets or assemblies to maintain proper alignment and safe operation
• Restores clamping force where a stripped or missing bolt lets parts shift or vibrate
• Helps eliminate rattling, scraping or movement caused by loose fasteners
• Matches standard 5/16-18 coarse threads for direct replacement of the OEM bolt

• Disconnect power to the appliance before servicing to reduce shock and injury risk
• Start threads by hand to avoid cross-threading; tighten using the correct socket or wrench
• Do not overtighten; snug to manufacturer torque or until secure to avoid stripping threads
• If the original mating threads are damaged, inspect the receiving part and repair or replace as needed

This siphon break kit replaces the drain anti-siphon assembly that prevents wash water from siphoning back into the supply. It helps keep drains flowing properly and reduces the chance of cross-contamination or odors. What it does:

• Prevents back-siphoning of drain water into the washer drain/supply
• Maintains proper drain flow and helps avoid unexpected water return
• Can resolve symptoms like slow or inconsistent draining, lingering drain odors, or water remaining after drain cycle
• Works with the washer's drain plumbing to protect wash water quality

• Disconnect power and shut off water before beginning any repair
• Inspect surrounding hoses and clamps; replace any damaged or brittle components
• Install per service manual instructions; ensure secure hose connections and correct orientation to prevent leaks
• Test a full drain cycle and check for leaks and proper operation after installation

A replacement nut-lock used to secure fasteners and keep panels or components from backing off due to vibration. Simple, durable hardware that restores a secure connection and reduces rattling or loose parts. What it does:

• Secures a mating bolt or stud to prevent loosening from vibration or movement
• Restores a solid attachment for panels, brackets, or assemblies that may come loose
• Helps eliminate symptoms such as rattling, vibrating, or intermittent panel movement
• Suitable where a locking fastener is required to maintain a reliable connection

• Disconnect power and follow appliance safety procedures before starting work
• Locate the matching stud or bolt and remove the old fastener if present
• Use the correct-size wrench or socket and tighten until the nut-lock seats; avoid over-tightening
• Inspect threads and mating hardware for damage; replace damaged components

This idler tension spring restores proper tension to the dryer belt/idler assembly so the drum turns smoothly and the drive system runs quietly. Replaces a worn or broken idler spring to help prevent belt slippage and uneven drying. What it does:

• Provides tension for the idler pulley so the drive belt stays engaged with the motor and drum
• Helps prevent the belt from slipping, squealing, or coming off the pulley
• Reduces vibration and noise caused by a loose or broken spring
• Commonly replaced when the belt repeatedly slips or the dryer makes unusual noises

• One idler tension spring

• Disconnect power (and gas, if applicable) before servicing the appliance
• Works with the idler pulley assembly; access typically requires removing the dryer front or top panel
• Inspect the idler pulley and belt for wear and replace both if damaged

This 1/4-20 nut secures related fasteners in appliance assemblies to keep components aligned and stable. It's a direct-fit replacement when the original nut is worn, stripped, or missing. What it does:

• Threads onto a 1/4-20 bolt or stud to lock parts together
• Restores tight mechanical connections that reduce vibration and noise
• Helps maintain proper alignment of panels, brackets, or linkage
• Commonly replaced when the original nut is rounded, corroded, or loose

• One 1/4-20 nut

• Use the correct 1/4-20 bolt or stud size and thread engagement
• Tighten to manufacturer torque if specified; avoid over-tightening
• Inspect adjoining parts (bolt, washer, bracket) for wear before reassembly
• Turn off and unplug the appliance before performing repairs

This clamp secures flexible hoses to fittings to maintain a tight seal and prevent leaks. Use it to replace a worn or loose clamp to stop water or air seepage and restore proper hose attachment. What it does:

• Holds a washer, dryer, or appliance hose firmly to a barb or fitting to prevent slipping
• Helps maintain a watertight or airtight connection to reduce leaks and drips
• Replaces corroded, cracked, or stretched clamps that no longer grip reliably
• Supports normal appliance operation by keeping fluid/air flow contained

• One clamp

• Inspect the hose and fitting; replace the hose if damaged before installing the clamp
• Position clamp over the hose barb and tighten evenly; avoid over-tightening that can cut the hose
• Disconnect power and water supply before servicing any appliance components