Awn432 Parts

A tall service tub kit that replaces the washer's outer tub assembly to restore drum support and reduce leaks or abnormal vibration. Use this kit when the existing tub is cracked, dented, or no longer sealing properly. What it does:

• Replaces the washer's outer/service tub to restore proper drum alignment and containment
• Helps stop water leaks caused by cracked or damaged tubs
• Reduces excessive vibration or wobbling from a failing tub assembly
• Restores a secure mounting surface for seals, bearings and suspension components

• Disconnect power and water and follow all safety precautions before beginning service
• Installation may require removing the cabinet and drum; follow the OEM service manual for step-by-step instructions
• Use appropriate tools and a second person for lifting or aligning heavy components
• Inspect seals, bearings and suspension parts while the tub is exposed and replace as needed

This 2 oz tube of silicone grease lubricates seals, gaskets and moving plastic or rubber parts to reduce noise and wear. It resists water and helps maintain smooth operation of appliance components. What it does:

• Lubricates rubber seals, gaskets, O-rings and sliding plastic parts to reduce sticking and squeaks
• Helps protect parts from moisture and prevents drying or cracking of elastomers
• Safe for most appliance plastics and rubbers when used sparingly as directed
• Commonly used during seal replacement, hinge service, and routine maintenance

• One 2 oz tube of silicone grease

• Apply a thin, even layer to clean, dry surfaces; avoid excess that can attract dirt
• Use gloves and avoid contact with skin and eyes; wash thoroughly after use
• Do not use on electrical contacts or high-temperature surfaces unless specified by OEM
• Follow appliance manufacturer instructions and replace seals or components as recommended

The Inlet Cover is an OEM part for Speedqueen washers. It provides a protective barrier over the rear water inlet area of the machine. As an integral part of the washer exterior, the inlet cover endures impact and environmental elements.

Causes of a bad inlet cover include cracks, dents or punctures from repeated impact. Warping or corrosion may also affect cover integrity over time.

Symptoms of a bad Inlet Cover include:

• Exposed electrical or water connections due to missing pieces
• Inability to safely or securely attach inlet hoses
• Leaks developing around compromised areas
• Degraded appearance or reduced longevity of exterior components

This replacement inlet hose carries water from your household supply to the washer, restoring proper fill and preventing leaks. Use it when the washer fills slowly, won't fill, or shows water leakage at the connection. What it does:

• Channels hot and/or cold water from the household supply to the washer's inlet valve
• Restores normal fill behavior when an old or damaged hose causes slow or no fill
• Stops leaks caused by cracked, split or deteriorated hose sections or fittings
• Helps prevent water damage from a failed or leaking supply connection

• Turn off household water supply and unplug the washer before replacing the hose
• Hand-tighten fittings, then snug with a wrench—do not overtighten to avoid damaging threads
• Inspect and replace any damaged washers or seals at the connections

This self-tapping screw secures panels and components on Speed Queen laundry appliances, restoring firm fastening and preventing rattles or gaps. Compact 8-18 x 3/8 size for use where a small, hex-washer-head fastener is required. What it does:

• Cuts its own mating thread in sheet metal or plastic mounting holes for a secure fit
• Holds control panels, trim pieces, and light brackets in place
• Replaces missing or damaged fasteners that cause loose or vibrating panels
• Helps restore proper panel alignment and reduces noise from loose parts

• Disconnect power before servicing the appliance
• Use the matching hex-washer driver or nut driver to seat the screw
• Start straight and apply steady pressure; avoid cross-threading
• Do not overtighten — snug until panels are secure

This replacement water inlet hose connects the home's water supply to the washer, restoring reliable water flow and preventing leaks at the rear hookup. Use when the original hose is cracked, split, or leaking. What it does:

• Carries incoming water from the fill valve to the tub for normal wash cycles
• Stops leaks caused by worn, cracked, or split inlet tubing
• Helps restore proper water fill when low or no-fill symptoms occur
• Matches OEM routing and connection points for a direct fit

• Disconnect power and shut off the water supply before beginning.
• Inspect and replace any worn clamps or fittings; tighten connections by hand then snug with a tool—do not overtighten.
• After installation, restore water and power, run a short fill cycle, and check all connections for leaks.

This replacement porcelain touch-up paint restores small chips, scratches and worn spots on enamel-coated appliance surfaces to help improve appearance and slow surface corrosion. Easy to apply for spot repairs. What it does:

• Covers small chips, scratches and scuffs on porcelain/enamel surfaces
• Helps protect exposed metal from moisture that can lead to surface rust
• Matches factory finish color on compatible porcelain-coated panels (spot repairs only)
• Useful for finishing edges around dings and improving visual appearance

• One bottle of porcelain touch-up paint

• Clean and dry the repair area thoroughly; remove loose paint and rust before applying
• Test paint in an inconspicuous spot to confirm color match and adhesion
• Apply sparingly with a fine brush or applicator; allow recommended drying time between coats
• Keep away from open flame; store and dispose of per local regulations; keep out of reach of children

This hood timer harness connects the cabinet hood switch to the washer's timer and control circuit, allowing the machine to detect lid position and enable or disable drive functions. It restores reliable communication between the lid switch and timer assembly. What it does:

• Routes power and signal between the hood/lid switch and the washer timer/control.
• Enables the washer to pause or prevent operation when the lid is open.
• Helps resolve intermittent or complete loss of lid-detection causing no-start or stopping mid-cycle.
• Reduces electrical issues caused by damaged, frayed, or corroded wiring in the hood area.

• Disconnect power before attempting any repair to avoid shock or injury.
• Inspect connector ends and routing; replace if brittle or connectors are damaged.
• Secure harness away from moving parts and sharp edges; use existing clips or ties.

This shipping brace stabilizes the washer cabinet and internal components during transport and delivery, helping prevent damage before installation. It's a direct-fit replacement that restores the unit's factory shipping protection. What it does:

• Secures the tub/cabinet to limit movement while the appliance is being moved
• Prevents internal component shifts and impact damage during shipping or transport
• Reduces the risk of cosmetic dents and misalignment caused by transit
• Used only for transport; remove before normal operation

• Intended for use only during shipping or moving; remove brace before operating the washer
• Follow manufacturer pack/unpack instructions and retain any caps or fasteners provided
• Keep hands clear of pinch points when installing or removing the brace