B20cs50sns Parts

This Bosch filter has an activated carbon media that is designed to reduce chlorine taste and odor, sediment, lead, mercury, and other impurities from your drinking water. Used on many Bosch refrigerators including the Evolution 500 Series model B20CS50SN, Evolution 800 Series model B20CS80SN, and the EVOLFLTR10 filtration system. For best performance, filter should be changed every 6 months or 400 gallons. Pressure range: 25-125 psi. Temperature range: 33-100 F. Flow Rate: 0.5 gallons per minute.

Replacement fan motor that circulates air to help maintain proper operating temperature and protect components from overheating. Restores airflow to stop noisy operation, vibration, or a fan that won't run. What it does:

• Drives the appliance cooling/evaporator/condenser fan to move air across coils and components.
• Restores proper airflow to improve cooling performance and reduce overheating risk.
• Stops common symptoms like loud humming/grinding, excessive vibration, or a fan that does not spin.
• Helps prevent related issues caused by stalled or weak fans.

• Disconnect power to the appliance before beginning any repair.
• Handle the fan blade and motor shaft carefully to avoid damage; use basic hand tools.

Replacement fan motor that powers the appliance's blower to circulate air for proper cooling and ventilation. Restores airflow and helps reduce noisy operation, overheating, or poor circulation caused by a failed motor. What it does:

• Drives the blower wheel to move air through the appliance, addressing weak or no airflow.
• Stops or reduces unusual grinding, rattling, or humming noises when the original motor fails.
• Restores proper ventilation to help prevent overheating and maintain consistent temperature.
• Used as the specified replacement when this part number is required.

• Disconnect power to the appliance before servicing; for gas models, shut off the gas supply as well.
• Handle wiring connectors carefully and match connector positions/colors during reassembly.
• Basic hand tools are typically required.

This temperature sensor monitors appliance temperature and sends temperature readings to the control board so the appliance can regulate heating and cycles. It's a direct-fit replacement designed to restore correct temperature feedback. What it does:

• Measures water/air temperature and converts it to a signal for the control board
• Helps the appliance maintain proper cycle temperatures and timing
• Can resolve temperature-related errors, incorrect water temperature, or failed cycle heating
• Works with the appliance's existing wiring harness and control system

• One temperature sensor

• Disconnect power to the appliance before starting any repair
• Handle the sensor and connector carefully to avoid damage to the probe or wiring
• Reinstall in the same orientation and secure all connectors for accurate readings

This is a replacement dryer complete assembly designed to restore drying function and structure for compatible Bosch laundry units. It provides the main cabinet and drum enclosure needed for normal tumbling and airflow. What it does

• Houses the drum and internal components so clothes can tumble during the drying cycle
• Provides the enclosure and mounting points for the blower, heating system, and controls
• Restores proper airflow pathways to help the dryer heat and vent as intended
• Helps eliminate issues caused by damaged or severely warped cabinet or drum housings

• One complete dryer assembly as shown

• Disconnect power before servicing
• Follow factory service manual for alignment, seal, and vent reconnection steps
• Inspect and replace any worn seals, ducts, or mounting hardware as needed during installation

This replacement screw is a direct-fit fastener used to secure panels and small components. It restores proper attachment and helps eliminate loose or rattling parts for a secure appliance fit. What it does

• Secures panels, brackets, and trim to restore proper alignment and prevent movement
• Helps stop rattling, vibration noise, and parts that shift or come loose
• Matches OEM thread and length for reliable fit when it's the correct screw for the repair
• Used where original mounting hardware is missing, stripped, or damaged

• One replacement screw

• Disconnect power or unplug the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to avoid thread damage or cracked panels
• This screw matches the original part by comparing size, thread, and head style before installation

This fixture is a replacement component designed to restore proper fit and support where the original mounting or housing has worn or broken. It helps maintain secure alignment of adjacent parts for reliable appliance operation. What it does:

• Provides the structural support needed for the attached assembly or trim
• Replaces a cracked, broken, or missing fixture that causes misalignment or rattling
• Helps stop loose parts from shifting during operation and reduces unusual noises
• Restores correct fit to prevent leaks or poor sealing when applicable

• High-level replacement only; ensure appliance is unplugged or power is off before starting
• Use correct fasteners and avoid overtightening to prevent cracking
• Inspect surrounding parts and seals for damage while replacing this fixture

This replacement screw secures panels and components on compatible appliances, restoring proper fit and stopping rattles or loose parts. Use it when a factory screw is missing, stripped, or damaged to return assemblies to stable condition. What it does:

• Fastens panels, trim, brackets, or assemblies to restore secure mounting.
• Helps eliminate rattling, vibration noise, or loose-fitting parts.
• Replaces stripped, corroded, or missing fasteners that prevent proper component alignment.
• Works as the original-style screw specified by the manufacturer for the listed application.

• Disconnect power to the appliance before starting any repair.
• Use the correct screwdriver or bit to avoid stripping the screw head.
• Tighten until snug; avoid over-torquing which can damage threads or parts.
• Keep removed hardware and new screw in a safe place during reassembly.

This replacement vegetable container is the clear crisper drawer that stores fresh produce and helps keep the refrigerator organized. It restores a broken, cracked or missing drawer so fruits and vegetables sit securely in the fridge. What it does

• Holds fruits and vegetables in the refrigerator lower compartment for organized storage.
• Replaces cracked, split, warped or otherwise damaged crisper drawers that no longer seal or slide properly.
• Prevents produce from spilling onto shelves and helps contain leaks from spoiled items.
• Slides into existing tracks/drawer guides to restore normal drawer operation.

• Remove all contents from the old drawer before removal; install with the fridge door open for easier access.
• Slide new container into the existing tracks; do not force—ensure it aligns with the guides.
• Handle edges carefully and wear gloves if needed to avoid cuts on broken plastic.
• If drawer does not seat or slide smoothly, check for obstructions or damaged tracks before forcing.

This replacement front console trim restores the appliance's exterior control area for a clean, finished appearance and proper button/knob alignment. Use it to replace scratched, cracked, or warped front trim. What it does

• Replaces the damaged or worn front console trim so controls and display sit correctly
• Helps prevent dirt and moisture from entering the control area
• Restores cosmetic appearance for a like-new finish
• Useful when the original panel is cracked, warped, or missing mounting points

• One replacement front console panel

• High-level swap: remove power and follow OEM disassembly steps for the console before replacing the panel
• Keep small fasteners and clips organized; some models require removing control knobs or the control module
• Avoid using excessive force on plastic tabs; align mounting points before securing

This holder is a small mounting bracket that secures and aligns a removable appliance component, restoring proper fit and preventing movement. It's a direct-fit replacement designed to return the original attachment and support. What it does:

• Secures a removable component or assembly in place to prevent shifting or rattling
• Restores correct alignment so parts seat and function as intended
• Stops common symptoms like loose parts, noise from vibration, or panels that won't stay seated
• Replaces broken, cracked, or worn mounting points that can allow excess movement

• One holder/mounting bracket

• Disconnect power and/or unplug the appliance before starting any repair
• Basic hand tools may be required; follow the appliance service manual for access
• Inspect surrounding clips and fasteners and replace if damaged to ensure a secure fit

This cover is an OEM replacement access panel that protects internal components and helps keep moisture and debris out of the appliance. It restores a secure, finished appearance and maintains proper component protection. What it does

• Shields electrical and mechanical components from dust, debris, and accidental contact
• Helps prevent moisture intrusion that can cause corrosion or shorting
• Restores a snug fit and proper airflow paths where applicable
• Replaces damaged, cracked, or missing panels that leave internals exposed

• One replacement cover

• Verify power to the appliance is disconnected before starting any repair
• Installation generally requires basic hand tools; handle edges carefully to avoid cuts
• Follow OEM instructions for correct placement and fastener torque
• If fasteners or brackets are missing or damaged, replace them with OEM parts for secure installation

This frame is the structural support piece that secures and aligns the appliance's front assembly, helping keep panels and the door in correct position for proper operation and appearance. It restores stability and fit. What it does:

• Provides mounting and alignment for the front/door assembly to prevent gaps and misalignment
• Keeps panels and trim secured to reduce vibration and rattling during operation
• Helps maintain a proper seal and appearance by holding edges flush
• Can address symptoms such as a loose or wobbly door, visible gaps, or rattling/front movement

• Disconnect power and water before beginning any work
• Remove surrounding trim or panels as needed; keep track of fasteners
• Handle finished surfaces carefully to avoid scratches; use appropriate tools