B22cs50snb/0150Sns/02 Parts

The Water Filter is an OEM part for Bosch refrigerators. This part removes impurities and contaminants from the water supply to your appliance. This part ensures that the water and ice dispensed by your refrigerator are clean, taste fresh, and are free of common waterborne particles and substances. 

Over time, the water filter can become clogged with sediments and contaminants, reducing its effectiveness and potentially affecting the taste and quality of the water and ice. Regular replacement is essential for maintaining optimal performance.

Symptoms of a bad Water Filter include:

• Unpleasant taste or odor in the water or ice
• Decreased water flow to the dispenser or ice maker
• Visible particulate matter in the water or ice cubes

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Control Board is an OEM component specifically designed for select Bosch refrigerators. As the crucial internal CPU, it directs all cooling, temperature regulation, and auxiliary feature functions.

Causes requiring replacement relate to long-term stresses from routinely powering temperature sensors and controlling airflow mechanisms. Damage during maintenance procedures may also necessitate updating this vital module.

Symptoms signaling board failure include:  

• Inability to lower interior temperatures below safety thresholds
• Fluctuating or unresponsive temperature readout displays
• Inoperative auxiliary settings like water/ice dispensing

This OEM Bosch replacement control board is also compatible with Thermador, Gaggenau, and some full-bodied Kenmore refrigerators utilizing identical heating performances. Reinstallation will restore the intended preservation capabilities.
 

This factory replacement tray restores the intended fit and function in your appliance. It provides a stable surface/collection area as designed by the manufacturer, helping items sit securely and containing minor drips or debris in the designated location. What it does

• Provides a stable, model-specific surface or collection area inside the appliance
• Helps contain small spills, drips, or debris where the tray sits
• Maintains proper support and spacing for items in that section
• Replaces a cracked, warped, stained, or missing original tray

• 1 tray

• Disconnect power and, if applicable, shut off water before servicing
• Compare the new tray to the original to match/orientation before installation
• Clean the area so the tray seats flat and secure
• Ensure any tabs or guides are fully engaged and stable fit before use

The Active Carbon Filter is an OEM part for Bosch refrigerators. This filter helps reduce odor-causing substances inside the refrigerator for fresher preserved food. It traps molecular impurities through an advanced filtration process.

Causes of a filter requiring replacement include normal lifespan expiration as indicated on the packaging. For optimal results, these filters should be replaced according to manufacturer guidelines.

Symptoms of a spent filter include:

• Return of odors to the refrigerator interior
• Potential taste transfers between strong smelling foods
• Reduced effectiveness of the odor reduction system

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

A replacement hinge pivot bearing that supports the dishwasher door for smoother, quieter opening and proper alignment. Fits into the door hinge assembly to reduce binding and wear for reliable door operation. What it does

• Supports the door hinge pivot so the door opens and closes smoothly.
• Reduces friction and wear on the hinge, helping prevent sagging or misalignment.
• Stops squeaks, sticking, or rough movement caused by a worn bearing.
• Works as a direct replacement for the corresponding hinge bearing in the door assembly.

• Disconnect power to the appliance and shut off water before starting any repair.
• Support the door while removing hinge fasteners to prevent the door from dropping.
• Access typically requires removing the lower toe panel or inner door trim—use basic hand tools.
• Inspect hinge components and nearby parts for wear; replace any damaged hardware and test door alignment after installation.

Temperature sensor that monitors internal appliance temperature and provides the control board with accurate readings. Replacing a faulty sensor helps restore correct temperature regulation and prevents food spoilage or freezer issues. What it does:

• Sends temperature readings to the appliance control so cooling and defrost cycles can run correctly.
• Common symptoms of a failing sensor: inconsistent temperatures, refrigerator or freezer running too warm or too cold, compressor or fans cycling abnormally, or ice maker not advancing.
• Can affect temperature-based functions on models that use this sensor for those controls.
• Replace if the sensor shows open/short behavior or gives inconsistent readings compared to expected operation.

• Always disconnect power to the appliance before servicing to avoid electric shock.
• Handle the sensor and probe carefully; the tip and wire connections are fragile.
• Reconnect wiring and mounting securely; avoid pinching the sensor wire or contaminating the probe.
• After installation, restore power and verify the appliance reaches and maintains expected temperatures.

The Water Valve is an OEM part for Bosch refrigerators. It controls the supply of water to the ice maker and water dispenser. Proper functioning is essential for usability.

Causes of a bad water valve may include mineral buildup disrupting flow over time, freezing damage during power outages, or wear from heavy use.

Symptoms include:

• No water dispensed from the refrigerator door
• Ice maker not able to produce ice properly
• Leaks or water spots around the valve area
• Strange noises coming from the valve mechanism

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Lamp is an OEM replacement part for Bosch refrigerators. It illuminates the interior, allowing for visibility of contents even in low-light conditions. A bright and long-lasting light source ensures continued visibility and convenience when accessing items stored inside.

Symptoms of a bad lamp can include intermittent or unreliable lighting, flickering bulbs, or lamps that fail to illuminate entirely. Over time, constant vibrations may cause loose connections or cracked sockets.

Causes of a bad lamp include:

• Lamps that do not illuminate at all or very dimly   
• Flickering or unreliable bulbs that do not stay lit
• Sockets, leads, or connectors that overheat during use
• Bulbs burn out rapidly rather than lasting months

This OEM Bosch part ensures continued clear interior visibility for Bosch refrigerators as well as products made by Thermador, Gaggenau, and select Kenmore models.

This defrost heater melts frost and ice from the evaporator coils so the refrigerator can run normal defrost cycles and maintain proper airflow and cooling. Replacing a failed heater helps reduce ice buildup and restore consistent cooling. What it does:

• Heats the evaporator coils during the defrost cycle to remove accumulated frost and ice.
• Common symptoms of a failed heater: heavy frost or ice on the evaporator, reduced cooling performance, or a freezer that requires frequent manual defrosting.
• Works with the existing evaporator cover and wiring harness to perform timed automatic defrosts.
• Replace when the heater is visibly damaged or tests open on a continuity check.

• Always disconnect power to the appliance before starting work to avoid shock or injury.
• Remove the evaporator cover and handle sharp aluminum fins carefully; take photos of wiring routing before disconnecting.
• Inspect the defrost thermostat and control board if the heater checks good but the fault remains.
• Reassemble panels and confirm proper routing and secure connections before restoring power.

This thermal fuse is a single temperature-cutout safety device that stops electrical flow when an appliance overheats, protecting wiring and components. Replace a failed fuse to restore normal heating control and safety. What it does:

• Opens the circuit when internal temperature exceeds safe limits to prevent overheating
• Stops power to the heating system or motor circuit when the fuse has blown
• Common symptom: appliance runs but no heat or heating element does not activate
• Common symptom: appliance stops mid-cycle or will not start due to open thermal circuit

• One thermal fuse

• Disconnect power before accessing or replacing any internal components
• Locate the thermal fuse on the appliance wiring or near the heater assembly per your model's service guide
• Verify an open fuse with a multimeter; replace with the exact part number—do not bypass

The Fan Motor is an OEM part for Bosch refrigerators. It is responsible for circulating cold air throughout the freezer compartment to keep your freezer contents frozen.  

A bad fan motor can occur due to normal wear and tear, electrical malfunctions, or damage from frost buildup or debris. Signs of a faulty fan motor include reduced cooling performance, unusual noises coming from the freezer, or the presence of frost or ice buildup.

Symptoms of a bad fan motor include:

• Insufficient cooling in the freezer  
• Unusual noises 
• Excessive frost or ice buildup  

Replace your faulty fan motor with this genuine OEM Bosch part to restore your refrigerator. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Water Inlet is an OEM component specifically designed for select Bosch refrigerator models featuring internal plumbed water sources. It provides direct access and connection for on-demand filtered water and ice production. 

Symptoms of a faulty water inlet include leaks or inadequate water pressure delivery to the refrigerator. Mineral buildup and wear over time are causes for replacement to maintain full functionality.

Causes of a bad water inlet can involve normal limescale accumulation impeding water flow. Damage from overtightening fittings during installation poses a risk of cracks developing as well.

Causes of a bad water inlet include:

• Low water pressure or lack of water dispensed
• Water leaks at the inlet port requiring repair 
• The inability of ice maker and filter to operate as designed

This OEM Bosch part is also compatible with some Dacor, Thermador, and select Kenmore refrigerator models.
 

This electronic control unit manages a dishwasher's timing, cycle selection and user interface, restoring normal operation when the main control fails. Replaces a faulty control board to help the appliance respond to commands and complete cycles. What it does:

• Receives input from buttons/touchpad and runs selected wash cycles
• Manages timers, relays and signals to pumps, valves and heaters
• Monitors sensors and status to advance or pause cycles
• Common symptom: appliance won't start or buttons are unresponsive
• Common symptom: cycles stop mid-run, or control shows error codes

• One control unit (electronic control board)

• Disconnect power (and water if applicable) before starting any repair
• Handle the board by edges and avoid static discharge; use ESD protection if available
• Verify connector orientation and seat all wiring firmly during reassembly

This display module is the user-facing control panel display assembly that shows status, settings and error indicators so you can read cycles and messages clearly and restore normal front-panel operation. What it does:

• Displays cycle status, time remaining and option indicators for the appliance control
• Shows error codes and messages to help diagnose problems
• Restores visible front-panel feedback when the original display is cracked, dim, or unresponsive
• Interfaces with the main control board to relay user inputs and screen updates

• One display module

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Handle the display carefully to avoid glazing, scratching, or bending the connector flex
• This is an electrical component; avoid touching contacts and use anti-static precautions if available
• Reconnect all harnesses and test operation before reassembling trim or panels

This fan motor assembly circulates air inside the appliance to support proper cooling and convection performance, helping reduce overheating and maintain even temperatures during operation. What it does:

• Drives the appliance fan to circulate air for cooling and temperature distribution
• Helps prevent overheating of components and supports consistent cooking/baking results
• Replaces a motor that has stopped running, is slow to start, or runs intermittently
• Reduces abnormal noise if the original motor is worn or failing

• Disconnect power to the appliance before beginning any repair
• Handle sharp sheet-metal edges and the motor carefully to avoid damage or injury
• Inspect mounting hardware and wiring; replace any worn clips or connectors as needed
• Test the motor operation before fully reassembling panels