Bjlr473etoww Parts

Best Seller

Genuine Ge part

Rear Drum Bearing Kit

By: Ge

Part Number: WE25M40

The Rear Drum Bearing Kit is an OEM replacement part for GE dryers. It is a comprehensive kit that includes both rear drum bearings and necessary mounting hardware. These bearings play a vital role in smoothly rotating the dryer drum during cycles, reducing vibrations and noise.

Symptoms of bad bearings include:

Excessive shaking or vibrating during cycles
Loud grinding or scraping noises emanating from the rear drum area
Difficulty turning or rotating the dryer drum by hand
Increased wear and early failure of other components

Causes of bad bearings can include normal wear and tear over time, exposure to excessive loads or unbalanced loads that strained the bearings, or damage from extended use without proper lubrication.

This OEM replacement is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Noisy

Do-It-Yourself Stories from Customers like You Very loud squeal noise Thomas P. • Dundalk , MD • June 05, 2018

Repair went well, replaced the pulley wheel, belt, rear drum bearing. Had an issue after replacement with the dryer stopping after ~5mins or so when running with heat. Fluff cycle would run fine. Details: The lock nut on the pulley wheel didn't feel tight enough so i tried to crimp it back on the pulley arm. It then became way too lose. I had to replace it with a plastic washer I had in my toolkit. That fit snug and seems to work fine. I also added some grease to the pulley shaft under... Read more

$73.95

Compare At:: $88.74
You Save:: $14.79

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Idler Pulley

4.8 (135)

By: Ge

Part Number: WE12X83

The Idler Pulley is an OEM part for GE dryers. This critical component helps to maintain the correct tension on the dryer's drive belt, ensuring smooth operation and preventing it from slipping.

Symptoms of a bad Idler Pulley include:

Squeaking or screeching noises during dryer operation, often a sign of bearing wear or failure.
The dryer drum not turning smoothly, or at all, indicating that the belt may be slipping or has come off entirely due to a failed pulley.
Excessive heat or a burning smell, which can occur if the pulley is seizing up and causing friction.
Visible wear or damage to the pulley itself.

Causes of a bad idler pulley can include worn bearings, accumulation of lint and debris that impedes rotation, or material fatigue after prolonged use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Will not tumble

Do-It-Yourself Stories from Customers like You Very loud squeal noise Thomas P. • Dundalk , MD • June 05, 2018

$16.68

Compare At:: $30.92
You Save:: $14.24

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Drive Belt

4.9 (257)

By: Ge

Part Number: WE12X10014

The Dryer Drive Belt is an OEM part for GE dryers that connects the motor to the drum, allowing the drum to rotate during the drying cycle. The belt measures approximately 87 inches long and 0.25 inches wide, with 4 ribs.

Over time, the Dryer Drive Belt can wear out or break, leading to the drum not turning.

Symptoms of a bad Dryer Drive Belt include:

The drum not spinning or rotating
A squealing or thumping noise coming from the dryer
The dryer stopping unexpectedly during a cycle

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms

Will not tumble
Won't start
Noisy

Do-It-Yourself Stories from Customers like You Was making a squeaking/squealing on start up Gerald G. • Nashua , NH • March 20, 2016

My GE dryer from the late 80's/early 90's was squealing when it would start up, belt or bearing I was thinking. I found a manual online that covered my model and I watched a video on this site that showed me how to take it all apart, mine was a bit different but the principles were the same. I took it apart and added some quick-disconnects to 2 wires so next time I can take the front panel off easily. When I got to the bearing it looked worn but not bad so I cleaned it and put it back. ... Read more

$15.38

Compare At:: $27.08
You Save:: $11.70

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Lamp

4.9 (186)

By: Ge

Part Number: WE05X20431

Note: 10-watt bulb

The Lamp is an OEM part for GE dryers. This part illuminates the dryer's drum interior, enhancing visibility for loading and unloading garments. It ensures that users can easily see their clothes and any items inside the drum, particularly useful in low-light conditions.

Replacing a non-functional dryer lamp is important for maintaining the functionality and convenience of your GE dryer, ensuring you can effectively manage your laundry.

Symptoms of a malfunctioning dryer lamp include:

A lack of light inside the drum when the dryer door is opened or during operation
Flickering or intermittent light indicating a loose connection or nearing the end of the lamp's lifespan
Complete failure to illuminate, which could stem from a burnt-out bulb or electrical issues within the dryer

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Light bulb in dryer Jeff P. • Bradenton , FL • September 03, 2017

It was an easy repair just screwed in. The ordering process and simple no hassle and got here fast! I will definitely order from you again Read more

$9.53

Compare At:: $10.48
You Save:: $0.95

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Rotary Start Switch

5.0 (99)

By: Ge

Part Number: WE4X881

This Rotary Start Switch is an OEM replacement part for GE dryers It is responsible for initiating the dryer's operation when the user turns the knob to the desired cycle and presses the start button. The rotary start switch is typically located on the control panel of the dryer, where the user interacts with the various settings and functions.
The GE dryer rotary start switch can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms:

The dryer not starting or responding when the start button is pressed
The start button feeling loose or not engaging properly
The dryer starts intermittently or only when the start button is held down
The dryer starts but immediately stops once the start button is released
The start switch becomes unresponsive or difficult to turn
The dryer not cycling through the different drying modes or settings

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Dryer start button buzzed when turned dryer wouldn't start. David D. • Dallas , TX • December 20, 2020

Looked at the diagnostic help on Appliance Parts Pros.com and the start switch was the problem, but only 25% of the time, so I was a little concerned it may be a different problem. The switch was reasonably priced, so I ordered it and it arrived in two days! It was very easy to follow the repair video, however, my GE Gas dryer had a lot of screws rather than 2 screws and tabs on the model in the video, so it took a little more time to open up. After turning off the gas and unplugging the... Read more

$52.73

Compare At:: $62.75
You Save:: $10.02

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Handle White

5.0 (126)

By: Ge

Part Number: WE01X20419

The Handle White is an OEM part for GE dryers. This part ensures a seamless fit and finish, matching the original design and color of GE dryers. The handle provides a comfortable grip for opening and closing the dryer door, making laundry tasks more convenient and less cumbersome.

Causes of a bad handle can include physical stress from pulling or accidental impacts, material fatigue over time, or environmental factors that weaken the plastic.

Symptoms of a bad Handle White include:

Difficulty in opening or closing the dryer door
A cracked, broken, or loose handle
Noticeable wear or discoloration that affects the appliance's look

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Door handle on ge dryer broke off Laura N. • Glen Gardner , NJ • June 27, 2014

My husband found the exact handle we needed to replace the one on our dryer at AppliancePartsPros.com and we ordered it. When it came, we replaced it. I know this sounds like a simple story, but honestly, it's much more. For weeks, this broken dryer handle was driving me crazy. Finally, my husband realized that AppliancePartsPros would likely have the part--and they did. We ordered the part on a weekend and got it on Monday. I couldn't believe it. We think this place is awesome. In the... Read more

$17.61

Compare At:: $20.96
You Save:: $3.35

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Door Strike

4.9 (26)

By: Ge

Part Number: WE1X1192

The Door Strike is an OEM part for GE dryers. This component is crucial for ensuring that the dryer door latches properly when closed. It interacts with the door catch mechanism to secure the door during operation, preventing it from opening unexpectedly, which ensures the dryer operates safely and efficiently.

Symptoms of a failing Door Strike include:

The dryer door not staying closed during a cycle
Difficulty in closing the dryer door or getting it to latch properly
The dryer not starting because the door switch is not engaged
Visible damage or wear on the door strike

Causes of a bad door strike can include wear and tear from regular use, physical damage from slamming the door or mishandling, and misalignment caused by repeated opening and closing.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: If the door catch is also needed, use part number WE1M1011.

Do-It-Yourself Stories from Customers like You Dryer door would not stay closed Frank H. • Louisville , KY • January 17, 2017

Replaced door strike and door latch Read more

$7.37

Compare At:: $8.36
You Save:: $0.99

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Door Latch

5.0 (28)

By: Ge

Part Number: WE1M1011

The Door Latch is an OEM part for GE dryers. This part ensures the dryer door stays securely closed during operation, activating the safety switch to allow the dryer to operate. The latch mechanism engages with the door strike to lock the door, preventing it from opening while the dryer is running, which is essential for both safety and proper functioning of the appliance.

Causes for replacement can include normal wear and tear, accidental damage, or a misalignment that prevents the door from securely latching.

Symptoms of a bad Door Latch include:

The dryer door doesn't stay closed during cycles.
Difficulty in starting the dryer due to the door not activating the safety switch.
Visible wear or damage to the latch mechanism.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You Was making a squeaking/squealing on start up Gerald G. • Nashua , NH • March 20, 2016

$10.95

Compare At:: $13.14
You Save:: $2.19

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Lint Filter

5.0 (51)

By: Ge

Part Number: WE18X54

The Lint Filter is an OEM part for GE dryers. This filter captures lint and debris from the laundry load, preventing it from clogging the dryer vent and ensuring efficient airflow. Properly maintaining the lint filter helps improve drying performance, reduces energy consumption, and prevents potential fire hazards.

Causes of a bad lint filter can include tears or cracks from regular use, accumulation of lint and debris that cannot be cleaned out, or warping due to heat exposure. A compromised lint filter can lead to decreased drying efficiency and potential safety issues.

Symptoms of a bad lint filter include:

Visible tears or holes in the filter mesh
The filter not fitting securely in its slot
Longer drying times
Excess lint accumulation in the dryer drum or vent

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Takes too long to dry

Do-It-Yourself Stories from Customers like You Filter was old and falling apart Vicky B. • Merced , CA • July 17, 2014

Sent an e-mail to AppliancePartsPros.com to make sure the filter I was ordering would fit my dryer model. Upon receipt, I simply replaced it. Read more

$70.32

Compare At:: $82.98
You Save:: $12.66

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Screws - 12 Pack

4.9 (75)

By: Ge

Part Number: WB1X500D

These GE screws are a 12-pack of OEM replacement parts responsible for securing and fastening various components and panels in a GE range or oven. These screws are designed with a hexagonal head, which allows for the use of a compatible wrench or socket for tightening. They are commonly used to attach sheet metal panels, brackets, and other parts within the appliance, ensuring that these components remain securely in place during operation.

This part fixes the following symptoms:

Loose or wobbly parts or panels within the appliance's interior or exterior
Panels or components falling out of place, creating gaps or exposing internal parts
Unusual noises or rattling sounds during the appliance's operation

The GE screws can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You The control knob spun freely without engaging to select cycle Polly H. • Glen Allen , VA • November 11, 2014

I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle. https://www.youtube.com/watch?v=cQwLtRcHx9k Read more

$7.65

Compare At:: $9.10
You Save:: $1.45

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Front Drum Support Bearing Glide

4.9 (33)

By: Ge

Part Number: WE3X87

The Front Drum Support Bearing Glide is an OEM part for GE dryers. Each dryer utilizes three of these parts, and they should be replaced as a set for optimal performance. This drum glide is 2-5/8 inches long and 1/2 inch wide. They provide smooth rotation for the dryer drum by supporting its front as it turns.

Causes of a bad front drum support bearing glide can include normal wear and tear over time, excessive load weights, or debris accumulation that can cause friction and damage. When the glide wears out, it can lead to increased noise levels and potential damage to other dryer components.

Symptoms of a bad front drum support bearing glide may include:

Squeaking or grinding noises during dryer operation
Uneven drum rotation or wobbling
The drum getting stuck or difficult to turn manually

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You My clothes dryer was making a terrible squeaking noise Kingston C. • Redwood City , CA • November 13, 2015

After taking off the top and front panels to access the drum, it was easy to see what the problem was. The front drum support was worn through and the 3 drum support glides were gone. The rear drum bearing was also completely worn out. And while I had the dryer apart I also replaced the idler pulley and drive belt. The only hard part was putting the drive belt back on the motor shaft and idler pulley. The dryer is back to drying clothes like a new machine. Read more

$10.95

Compare At:: $14.04
You Save:: $3.09

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Blower Wheel

4.8 (31)

By: Ge

Part Number: WE16M15

The Blower Wheel is an OEM replacement part for GE dryers. It has a role in the air circulation within the dryer, aiding in the even and efficient drying of clothes. The blower wheel, connected to the motor, helps in expelling the moist air out of the dryer through the exhaust vent during the drying cycle.

Causes of a malfunctioning blower wheel are typically wear and tear from regular use, the accumulation of lint or debris, or damage to the wheel’s fins or central hub, which can impact its rotation and air circulation capability.

Symptoms of a bad Blower Wheel include:

Unusual noises during operation
Extended drying times
The dryer overheating
Reduced air circulation

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer blower wheel rubbed on some part of the housing and made a loud noise when operating Jennifer B. • Houghton , MI • October 04, 2014

New wheel didn't look different than the other wheel, but we put it on, it works and we're very happy. Read more

$60.61

Compare At:: $72.13
You Save:: $11.52

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Clamp And Screw Kit

5.0 (22)

By: Ge

Part Number: WE1X688

The GE clamp and screw kit is an OEM replacement part responsible for securing the dryer blower wheel in place. This kit consists of two clamps and a screw, designed to ensure the blower wheel remains firmly attached to the motor shaft. The clamp maintains the blower wheel's stability and prevents it from coming loose during the drying process. The blower wheel creates the airflow necessary to circulate hot air and efficiently dry clothes.

Over time, clamps and screws can become loose or corroded due to regular use, vibrations, or exposure to moisture. Improper handling during maintenance or repairs can also lead to damage or loss of these small but essential parts.

Symptoms of a bad Clamp and Screw Kit include:

Loose or rattling components within the dryer
Parts becoming misaligned or detached
Unusual noises during dryer operation
Difficulty in securing dryer parts during repairs

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Blower fan had come loose and was hitting the inside of the housing Chris R. • Ridgeland , MS • February 08, 2015

Had to remove the front and top panel on the dryer, disconnect the belt and remove the drum. From there it was two screws to slide out the motor assembly with the fan attached and one bolt to remove the clamp and screw kit holding the fan in place. They kit was worn and was allowing the fan to move forward and back on the motor shaft. Once replaced it took about 5 minutes to reassemble and my dryer now purs like a kitten. Read more

$18.52

Compare At:: $22.04
You Save:: $3.52

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Drum Front Support Bearing

4.8 (20)

By: Ge

Part Number: WE3X77

This Dryer Drum Front Support Bearing is an OEM part compatible with GE dryers. It is responsible for supporting and stabilizing the dryer drum during operation. As the drum rotates, the front support bearing helps to maintain its proper alignment and reduces friction between the drum and the front panel. It measures 15 inches in height and has an interior width of 20 1/2 inches. It does not include the 3 drum glides, which are used and sold separately.

Causes of a bad dryer drum front support bearing can include normal wear and tear over time, excessive load on the drum, or lack of proper lubrication.

Symptoms of a bad dryer drum front support bearing may include:

Squeaking, grinding, or scraping noises during the drying cycle
Drum wobbling or sagging
Difficulties in rotating the drum manually
Uneven drying or clothes getting caught in the drum

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Note: For drum glides order WE3X87.

Do-It-Yourself Stories from Customers like You My clothes dryer was making a terrible squeaking noise Kingston C. • Redwood City , CA • November 13, 2015

$75.21

Compare At:: $89.50
You Save:: $14.29

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Motor Kit

4.7 (21)

By: Ge

Part Number: WE17X10010

This dryer motor kit powers the drum and blower. Replacing a weak or failed motor restores proper tumbling and airflow so the dryer starts reliably and dries loads more evenly.

Drives the drum via the belt and turns the blower wheel for airflow
Helps resolve: dryer hums but won't start, drum won't turn, or stops mid-cycle
Can reduce loud buzzing/grinding noises from the motor area
Restores consistent operation when the motor overheats and trips its protector

What's included: 1 drive motor Install notes:

Disconnect power; turn off gas supply to gas dryers before servicing
Remove panels to access the drive system; release belt tension and remove the drum as needed
The blower wheel threads onto the motor shaft—support it carefully; many GE dryers use a reverse (left-hand) thread
Transfer wiring and any reusable hardware to the new motor; test before reassembly

Do-It-Yourself Stories from Customers like You Motor was not working Linn C. • Saint Augustine , FL • June 17, 2014

Replaced the motor with a new one, if I can offer any advice about doing this job, make sure to keep track of where each wire goes on the motor and whatever wires need to be disconnected. There are a few good video's online showing how to do this job and can save you a lot of time and frustration. Read more

$156.51

Compare At:: $283.68
You Save:: $127.17

IN STOCK

Ships Monday Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Rear Drum Support Bearing

4.9 (33)

By: Ge

Part Number: WE3X75

Bearing only, to get complete assembly order WE25M40

Do-It-Yourself Stories from Customers like You Was making a squeaking/squealing on start up Gerald G. • Nashua , NH • March 20, 2016

$18.69

Compare At:: $22.05
You Save:: $3.36

IN STOCK

Ships Monday Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Bjlr473etoww Parts

Rear Drum Bearing Kit

Idler Pulley

Dryer Drive Belt

Lamp

Rotary Start Switch

Handle White

Door Strike

Door Latch

Lint Filter

Screws - 12 Pack

Front Drum Support Bearing Glide

Blower Wheel

Clamp And Screw Kit

Dryer Drum Front Support Bearing

Dryer Motor Kit

Rear Drum Support Bearing