Cdt765 Parts

This floor plate is the OEM-style replacement that fits under the oven cavity to protect internal components and provide a stable cooking surface. Restores proper support and helps maintain even heat distribution in the lower oven area. What it does

• Covers and protects the oven's lower cavity from spills, drips, and falling debris
• Helps funnel heat and airflow for more consistent baking and roasting performance
• Prevents direct contact between food/drips and heating components
• Reduces corrosion and wear to inner oven parts caused by spills

• One floor plate as shown

• Designed to be installed in the lower oven cavity; for exact placement
• Remove power (unplug or shut off breaker) and allow the oven to cool before servicing
• Use appropriate gloves to avoid sharp edges; avoid forcing the part into place

Dishes not getting clean on the bottom rack? A cracked or clogged lower spray arm prevents proper water distribution. This assembly restores wash coverage.

Replace a cracked, scratched, or loose dishwasher control panel lens. This assembly includes adhesive to secure the lens and restore button visibility.

Dishes not cleaning in the center rack? This middle spray arm assembly restores targeted water coverage to the mid-level. Easy DIY fix in 15 minutes.

Secures the inner frame wire to the dishwasher cabinet. Replace if your clip is cracked, broken, or missing to keep wiring and trim properly aligned.

This SCR (silicon controlled rectifier) is a replacement power-control semiconductor used on select appliances. It regulates current flow so heating and motor circuits switch reliably for normal operation. What it does:

• Acts as a solid-state switch to control power to heaters or motors when signaled by the appliance control
• Helps enable proper on/off cycling and prevents uncontrolled current flow
• Commonly linked to symptoms such as no heating, intermittent operation, or failure to switch power
• Designed for mounting on a chassis or heat sink and wire-terminated via the stud connection

• One SCR

• Disconnect all power before starting work to avoid shock or injury
• Handle the part carefully; avoid touching semiconductor leads and follow electrostatic-discharge (ESD) precautions
• Confirm the part number on your appliance before ordering and compare terminal/stud fitment to the old unit

This striker latch secures the dryer door so the machine can run and maintain a proper seal during operation. It replaces a worn or broken striker to restore reliable door closure and normal cycle starts. What it does:

• Provides a catch point for the dryer door so the door stays firmly closed during operation.
• Helps the dryer detect a closed door and start/complete cycles; a damaged striker can prevent the dryer from starting.
• Prevents door rattling or intermittent opening during use.
• Restores proper door alignment and sealing when the original striker is bent, broken, or worn.

• One striker latch

• Disconnect power to the dryer before starting any repair.
• Remove the dryer front or door trim as needed to access the striker; retain original fasteners.
• Inspect the door strike mounting area and replace any stripped screws or damaged trim.
• After installation, test the door operation and run a short cycle to ensure proper function.

This fill hose routes incoming water from the household supply into the washer. It replaces cracked, split, or leaking inlet hoses to restore proper water fill and help prevent leaks during the wash cycle. What it does

• Connects the home water supply to the washer's inlet valve to allow normal water fill.
• Replaces damaged or deteriorated hoses that drip, spray, or fail to maintain water flow.
• Helps eliminate visible leaks and reduces the risk of water damage around the appliance.
• Restores reliable fill performance when the original hose is worn, swollen, or split.

• Turn off water supply and unplug the washer before starting installation.
• Confirm correct hose orientation and thread type before tightening to avoid cross-threading.
• Hand-start threads, then snug with a wrench—do not overtighten; check all fittings for leaks after restoring water.
• Inspect inlet valve and fittings; replace any corroded or damaged connectors for a secure seal.

Replaces the protective top cover for your dishwasher control box housing. Needed when the original is cracked, broken, or missing to keep electronics enclosed.

This inner frame wire clip secures the oven door frame components to keep the inner frame stable and aligned during use. It helps restore proper door fit and prevents rattling or loose trim. What it does:

• Fastens the inner frame wire to the door/frame assembly to maintain alignment and stability
• Prevents door trim or inner frame from shifting, vibrating, or rattling during operation
• Helps restore a tight door fit that can affect sealing and appearance
• Compatible replacement for worn, broken, or missing inner frame clips

• One inner frame wire clip

• Disconnect power to the appliance before starting any repair
• Remove the door or access panel to reach the clip location
• Use basic hand tools (screwdriver, needle-nose pliers) and replace the clip by aligning it carefully before snapping it into place

This clip secures the outer frame wiring in place to maintain proper wire routing and prevent pinching or disconnection. It helps keep internal harnesses organized so controls and components stay reliably connected. What it does:

• Holds outer frame wiring firmly against the cabinet or door to prevent movement and wear.
• Prevents wire chafing and accidental disconnects that can cause intermittent electrical issues.
• Supports proper routing of harnesses during door/cabinet opening and closing.
• Commonly replaced when clips are broken, missing, or cracked, or when wires are loose or rubbing.

• One outer frame wire clip as shown

• Designed for simple snap-in replacement; remove power to the appliance before servicing.
• Inspect surrounding wires and routing; replace any damaged wiring or additional clips as needed.
• Use basic hand tools; avoid forcing the clip to prevent frame or wiring damage.

This coated upper FDT assembly is a direct replacement for the appliance's upper FDT structure, restoring worn or damaged upper components for reliable operation. It helps maintain alignment and reduces wear-related issues. What it does:

• Replaces the appliance's upper FDT assembly to restore proper fit and support.
• Provides the coated surface that helps protect mating parts from wear and abrasion.
• Helps correct symptoms such as rubbing or scraping noises, misalignment of the upper housing, and visible wear or damage.
• Restores the intended clearance and contact surfaces for smoother operation.

• One coated upper FDT assembly.

• Disconnect power to the appliance before starting any repair.
• Handle the coated surfaces with care to avoid scratching or damaging the finish.
• Retain and reuse existing mounting hardware unless replacement hardware is explicitly required.

Replace worn or rusted fold-down tines on your dishwasher's upper rack. Restores adjustable support for cups, bowls, and small items. Verify fit by model.

Cushions and positions the tub to reduce vibration and prevent metal contact. Replace if worn or if tub alignment shifts during wash cycles.