Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Upper Spray Arm Bearing is an OEM part for GE dishwashers. It supports the upper spray arm, allowing it to rotate smoothly and distribute water evenly throughout the dishwasher. This ensures that all dishes receive a thorough cleaning during each cycle.
Over time, the upper spray arm bearing can wear out or become damaged. Causes of a bad bearing can include repeated use, mineral buildup from hard water, or physical damage due to mishandling.
Symptoms of a bad Upper Spray Arm Bearing include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more
The Gasket Spring is an OEM part for GE dishwashers. It plays a crucial role in maintaining a tight seal around the dishwasher door, ensuring that water does not leak during operation. This spring helps keep the door gasket in place, providing a reliable and consistent seal.
Over time, the gasket spring can wear out, lose tension, or become damaged due to repeated use and exposure to the dishwasher’s high temperatures and moisture. A faulty spring can compromise the effectiveness of the door gasket, leading to potential leaks and inefficient washing cycles.
Symptoms of a bad gasket spring include:
Not the first time my 10 year old dishwasher developed a leak. I have learned that the tub gasket gets dirty and the gasket spring gets weak. Cleaning and if needed replacing that solves the problem. In cleaning the tub gasket this time I notice the bottom door seal had separated from the door. It was originally riveted on. This seal is part of the door assembly and not available as a separate part. You need to buy inner door to get a new seal. Not worth it on a 10 year old appliance. BUT,... Read more
Dishwasher rack tine clip. Used to hold the tines in place within the rack. Color: gray. Measures about 1 inch wide by 1 inch high by 1-1/2 inches deep.
I replaced the pump drain assembly. The flapper valve was included in the assembly, so I did not need to order that. On previous repairs, the old drain hose was tricky to reinstall, so I replaced it and the hose clamp.The silverware basket had holes in the bottom and required replacement. I had some broken tine clips. Read more
Upper dishrack roller and axle kit includes: 4 rollers and 4 axles.
Replaced all of the broken parts with the new parts from Appliance Parts Pros. Read more
This dishwasher flood switch seal sits around the flood/leak switch to create a watertight barrier at the switch opening. Replacing a cracked or flattened seal helps stop under-unit drips and keeps leak detection working properly.
Thanks to appliancepartspros.com the dishwasher was able to be repaired quickly and under budget. I removed the motor pump assembly and replaced it. I was also able to change out the faulty flood switch and replace the seals to stop the leak. The appliance is once again good as new and ready to run a new load of dishes. Read more
Dishwasher overflowing or leaking from the door? A faulty float can cause overfill issues. This float controls water level and prevents flooding.
Removed dishwasher from it niche, examined the bottom, and found out what parts I needed. Went on line, found Appliance Parts Pro, looked at their video, saw that I could do it, and ordered the parts. When the parts arrived, removed old parts, and inserted new ones. It took longer to remove the dishwasher from it's niche, than to replace the parts. Read more
Replaces a cracked, broken, or missing dishwasher vent cover that mounts on the inner door panel. Shields the exhaust opening and directs airflow.
The 4 screws that hold the vent cover in place also hold the assembly inside the door that has the heater motor and other items. The four screws go through the assembly inside the door, through the door and into 4 plastic legs on the vent cover. Two of the legs on the vent cover were broken and therefore the vent cover and the assembly inside the door were not being held tight against the door. The water was leaking in that area. Read more
This middle spray arm bracket secures the mid-level spray arm to the upper rack, keeping it centered and aligned so it spins freely and delivers even spray coverage for reliable cleaning performance.
Removed upper basket out of dishwasher by removing slide arm stops. Turned basket upside down and removed broken parts. Took 5 minutes to take apart and put back together. Read more
This middle spray arm assembly mounts at the center wash level and distributes pressurized water across both racks. Replacing a damaged or clogged arm restores even spray coverage and helps resolve weak cleaning performance, especially on the upper rack.
Replaced Middle Spray Arm Hub and Arm Spray Middle Asm. Works like a charm now. Read more
Fix dishwasher overfilling or not filling properly by replacing the float dome. Snaps onto the float assembly to control water level. DIY repair.
Exact GE part, so perfect. Thank you! Read more
My repair went really great! I now have a new automatic soap dispenser that costs me only $60 to buy the part. I guess I would have paid at least $150 if not more to have a repair guy come in and do it but the video was just amazing! I did it myself and my husband could not believe it! When he came home from work he was already to "get it done" but I had beat him too it. Great site! I ordered the part and watched the video which was VERY easy to follow. I will always look here for parts... Read more
I found the schematics on your site and took my best guess at the individual components that I should replace, related to the flood switch. I guessed correctly. Read more
Remove the unit. Unscrewed filler cup. Put on new part. FIXED PROBLEM. Read more
I used lime away, vinegar, finish washer cleaner none of them worked. Finally just use Brillo on the entire cabinet interior. It came out very clean. Only needed very light scrubbing. Then replaced the severely corroded filters Riser tube and upper jet which was not turning. After this the upper arm turned perfectly silverware and glassware and silverware came out rinse very clean. Will do preventative maintenance in the future. Dishwasher was about 5 years old GE Profile high-end Read more