Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Oven shuts off at high temperature or won't heat? This high-limit safety thermostat may have failed. Restores normal heating. Easy DIY fix in 30 minutes.
Thermostat was broken, was a quick easy fix thanks. Read more
Range burner not heating? This 8-inch surface element restores even heating to your cooktop. Simple plug-in replacement takes under 10 minutes with no tools.
I unplugged the old, plugged in the new, and started cooking. Read more
This 10-32 terminal block nut fastens wire lugs to the appliance's terminal studs. Replacing a missing, stripped, or corroded nut restores a tight, reliable connection and helps prevent heat damage or intermittent power at the connection.
The oven temperature was low and the heating time excessive. However, the range display showed the requested 400F, even though the oven was really 250F. Because the oven displayed an inaccurate temperature, I ordered an oven sensor, a heating element, and a terminal block. Replacing the heating element fixed the problem. The element I received was the same shape and size, but the supports were not the same. However, I think it must have been a design change after mine was manufactured... Read more
Supports and guides your range's lower drawer for smooth sliding. Replace worn or broken rollers to restore easy operation and prevent binding or sagging.
Purchased replacements from you. Read more
Color: Black. For biscuit order 98008169. For white order WP98008544.
Ordered new screws and door gasket. Replaced the old door gasket now the oven warms up faster and bakes the stuff easier. Replaced the missing door trim screws. Now the door close without making noises. Read more
Replace your worn oven door gasket to restore heat-resistant seal, improve temperature control, and reduce heat escape. Confirm fit with your model number.
Metal support rod that props your range cooktop open during cleaning or repairs. Replace if bent, broken, or missing to safely hold the lift-up top in place.
Fixes ovens that won't heat or show F8/F9 error codes. This relay switches power to heating elements and fans. Moderate DIY repair with multimeter.
I first tested and replaced the temperature sensor. Since this is a slide-in range, I managed to pull it out just enough to access the back without disconnecting the downdraft and gas line. (For wall models this would not be the case.) Unfortunately, that did not do it. Next I replaced the lower heating element because it was a little below the ohms level it should be at. No go. So far, both of these were pretty easy to do and were relatively inexpensive so I wasn't too frustrated. Then I... Read more
Aligns and stabilizes your range's lower storage or warming drawer for smooth sliding and flush closure. Replace if cracked, worn, or missing to restore fit.
White plastic top trim for your range door. Replaces cracked, broken, or discolored trim pieces. Installs along the upper edge of the oven door frame.
I had to place pins in each door lack to keep the door open. Took the door off and I had to take it completely apart. It was a little tricky putting it back together. Read more
Exposed wiring at the back of your range? This terminal block cover shields power connections from contact and debris, restoring safe operation.
The Wall Oven Capacitor Motor is an OEM part for GE wall ovens. Located inside the oven cavity, this motor is responsible for turning the convection fan which circulates hot air for even baking and roasting.
Symptoms of a bad capacitor motor include:
Causes of failure can be wear over time, damage from debris inside the oven, or occasional voltage fluctuations which can degrade motor components.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
With the support of Appliance Parts Pros, I ordered 3 parts (plus glass stove top cleaner) that were suspected to be the cause of the problem for a total of $49.59. Easily replaced the Range Oven Sensor, $15.91, at the back of the interior oven & that was it! All oven features work fine & my wife set the oven for the clean cycle earlier today. So far, so good! Thanks for your help! Would recommend Appliance Parts Pros to anyone. Read more
Metal leveling leg screw threads into your range base to adjust height and stabilize the unit. Replace missing, bent, or stripped screws for level footing.
I price shopped for the missing adjuster feet for our big box discounted slide in range. Most local appliance parts suppliers want $12 - $15 per foot... I needed 3, applianceparts.com had them for 4.50 plus shipping. I saved enough to go out to eat and avoid using the new range for another day. Read more
Wire oven rack restores shelf space inside your electric range. Replaces missing, bent, or worn racks. Slides on factory supports for stable cookware placement.
Ordered perfect fitting one from appliance parts pro Read more
Replace worn range oven door insulation to maintain heat efficiency and protect outer door surfaces. Up to 4 pieces may be needed. Verify fit with model.