Cfe3050lsk Parts

Mounts between the fresh food fan assembly and its housing to create an airtight, cushioned seal. Replacing a damaged gasket restores proper airflow and helps stabilize refrigerator temperatures while reducing vibration and noise from the fan area.

• Seals the interface between the fresh food fan and the duct/liner to prevent air leaks
• Directs airflow through the evaporator and vents for consistent cooling
• Cushions the fan mount to minimize vibration and rattling
• Failure may present as weak airflow, temperature swings, or new buzzing near the fresh food fan cover

• Disconnect power before servicing to avoid electrical shock
• Remove shelves/bins and the fresh food rear interior panel to access the fan
• Note gasket orientation; seat it evenly with no gaps and avoid stretching/compressing it
• Ensure the fan spins freely and runs quietly before reassembly

The Set Screw is an OEM part for GE refrigerators. It is used to secure various components within the refrigerator, ensuring they remain firmly in place during operation. 

Over time, a set screw can become worn, stripped, or lost due to regular use or during repairs. A missing or damaged set screw can lead to loose components, which may cause operational issues or even damage other parts of the refrigerator.

Symptoms of a bad Set Screw include:

• Loose or rattling components inside the refrigerator
• Difficulty in keeping parts securely fastened
• Noise coming from the area where the screw is used
• Misalignment of parts, leading to improper functioning

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement door bin fits the right-hand fresh food door and restores organized storage for condiments, jars, and small bottles. It helps maximize usable space and keeps frequently used items easy to see and reach.

• Holds condiments, small bottles, and jars on the right fresh food door
• Replaces a cracked, broken, or missing door bin
• Snaps into the molded slots on the door liner for secure storage
• Common symptoms: cracked plastic, broken tabs, won't stay seated, items tipping

• Disconnect power before servicing
• Empty and lift the old bin up and out of the door liner slots
• Align the new bin with the slots and press down until fully seated
• Confirm a secure fit before loading items

This small return spring provides the tension needed for a lever, latch, or flap mechanism in select refrigerators, helping the component move smoothly and snap back to its correct resting position after use.

• Restores proper tension so the linked mechanism operates smoothly and returns to neutral
• Helps doors, latches, or levers close or engage consistently
• Typical failure signs: weak or missing spring force, parts that don't spring back, poor closure, or rattling
• Replacing a fatigued spring can improve feel and reliability of the mechanism

• Disconnect power; turn off the water supply if working near dispenser or ice components
• Note spring orientation and take reference photos before removal
• Use needle-nose pliers and control stored tension to avoid injury
• Inspect related clips, pins, or brackets and replace if worn

Restore usable storage on your freezer door with this replacement bin. It mounts to the door to organize small items and keep them secure when opening and closing the freezer.

• Attaches to the freezer door to hold and organize frozen items
• Helps prevent items from tipping or falling when the door moves
• Replace if the bin is cracked, broken, warped, missing, or won't stay seated
• Designed to fit the specified door position on models that use this bin

• Remove the old bin by lifting up and pulling out of the door slots
• Align the new bin's tabs/hooks with the door rails and slide down until fully seated
• No tools or electrical work required; handle plastic carefully to avoid cracking
• Allow it to reach room temperature before installing

The Defrost Heater is an OEM part for GE refrigerators. This part melts any frost that accumulates on the evaporator coils during the cooling cycle, ensuring that the refrigerator operates efficiently and prevents ice build-up.

Common causes of a bad defrost heater include wear and tear over time, electrical failures, or damage from excessive frost or ice accumulation.

Symptoms of a bad Defrost Heater include:

• Frost or ice buildup on the evaporator coils
• The refrigerator or freezer not maintaining proper temperatures
• Longer defrost cycles or the defrost cycle not working at all
• Unusual noises during the defrost cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement slide supports and guides the refrigerator's upper freezer basket so it glides smoothly in and out. Replacing a cracked or worn slide restores easy access and helps keep the basket aligned during everyday use.

• Provides the track for the upper freezer basket to slide smoothly
• Keeps the basket aligned during opening and closing
• Helps prevent scraping, binding, or the basket coming off its track
• Common signs of failure: basket hard to move, sits crooked, rubs the liner, or visible cracks/broken tabs

• Disconnect power to the refrigerator before servicing
• Remove food and lift out the upper basket as needed for access
• Release or unfasten the damaged slide from its mounting points (clips or screws vary by model)
• Install the new slide securely and test basket travel for smooth operation

The Ice Box Door Assy is an OEM part for GE refrigerators. It is the complete door assembly housing the storage bins for ice cubes on the fresh food door. 

The Ice Box Door Assy keeps ice conveniently accessible while maintaining cold air containment in the fresh food section.

Causes can involve normal wear over time from frequent use. Accidental dings or impacts can also damage fresh food door components.  

Symptoms of a bad Ice Box Door Assy include:

• Difficulty opening or closing the ice box door
• Improper sealing letting warm air enter the freezer
• Damage or cracks in the plastic door assembly

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

Specs: 10-16 x 1/2 inch.

This set screw secures refrigerator components—most commonly door handles—to their mounting studs. Replacing a missing or stripped screw restores a solid, secure feel and helps prevent loose or wobbly handles.

• Locks the handle to its mounting stud to keep it tight and secure
• Helps resolve a loose, wobbly, sliding, or rattling handle
• Replaces a missing, rounded, or damaged set screw
• Helps maintain proper handle alignment and consistent door operation

• Unplug the appliance or switch off power before servicing
• Ensure the handle is fully seated on the studs before tightening
• Start the screw by hand to avoid cross-threading; then tighten until snug
• Do not overtighten to prevent stripping the screw or handle threads

The Icemaker Fan with Thermistor is an OEM part for GE refrigerators. This component circulates chilled air within the icemaker system and includes a built-in thermistor sensor. It monitors temperatures to ensure cubes freeze properly according to cold- and heat-sensing feedback to the refrigerator's control unit. 

Causes of failure can include faulty wiring or connectors related to the electronic thermistor component. The fan motor itself may experience normal wear over extended use.

Symptoms include:  

• Inability to detect freezing temperatures which stops ice production
• Cubes forming inconsistently or not fully freezing before ejection
• High-frequency tripping of the refrigerator's cooling system  
• Loud grinding noises from the icemaker

This GE OEM replacement restores dependable icemaking performance. Equipped with a precise thermistor, it guarantees proper ice formation through monitored temperature control. Compatible with later produced Hotpoint, RCA, and Kenmore refrigerator models as well.
 

The Tube Lead is an OEM part for GE refrigerators. It is responsible for routing water through the unit.

Causes of a bad tube lead can include mineral accumulation restricting flow, loosened compression fittings, or cracked/split tubing exposing water to air.

Symptoms of an issue with the water line tube lead include:

• Slow or inconsistent water and ice production
• Water pressure or temperature fluctuations at the dispenser
• Leaks in the refrigerator's exterior bottom panel

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Motor Duct Door is an OEM part for GE refrigerators. It is the cover that houses the evaporator fan motor and ductwork in the refrigerator. The motor and ductwork circulate cold air throughout the unit to maintain even temperatures for food storage.

Causes of a bad motor duct door can include failed seals that compromise cooling performance or damage to the door and hinges that prevent proper opening and closing. 

Symptoms of a bad motor duct door include: 

• Warm or lukewarm air inside the refrigerator sections  
• Improper airflow causes warmer or colder spots
• Difficulty opening or closing the duct door

Replacing with this genuine GE OEM part allows for optimal air circulation throughout the refrigerator. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This fan-mount grommet fits the evaporator or condenser fan assembly to isolate vibration and keep the motor aligned. Replacing a worn grommet can quiet rattles and prevent the fan blade from rubbing the housing. What it does:

• Isolates the fan motor from its bracket to reduce vibration and operating noise
• Helps maintain proper fan motor and blade alignment/clearance
• Replaces cracked, flattened, hardened, or missing grommets
• Typical symptoms: rattling, buzzing, or vibration sounds from the freezer or rear machine compartment

• 1 fan motor grommet

• Disconnect power before servicing; pull the refrigerator forward for rear access if needed
• Evaporator fan: remove the freezer's rear panel; condenser fan: remove the rear service panel
• Support the motor, remove the fan blade and mounting hardware as needed, replace the grommet, and reassemble
• Ensure the fan spins freely and does not contact the shroud before restoring power

This is the top-left refrigerator door bin used on models with in-door ice. It restores secure storage and organization on the door so smaller items stay put when you open and close the refrigerator. What it does:

• Mounts on the top-left door position to hold and organize items near the in-door ice area
• Replaces a cracked, warped, or missing bin
• Helps prevent items from tipping or falling during door movement
• Addresses issues where the original bin won't stay seated or interferes with door closing

• 1 door bin

• Compare to your original to confirm the top-left position and mounting style before installing
• Remove contents; align the bin's tabs/hooks with the door slots and press firmly until fully seated
• Do not force; if working near the dispenser/ice system, power off the refrigerator and shut off water as needed

This replacement Door Ice bottom bin restores secure, usable storage in the lower position of the Door Ice section. Replace a cracked, warped, or missing bin to keep items in place and maximize door capacity. What it does:

• Serves as the bottom shelf/bin in the Door Ice area to hold items securely
• Mounts to the door's molded rails/hooks for a stable fit
• Replace if the bin is cracked, hooks are broken, or it won't stay in place
• Helps prevent items from tipping or falling when the door opens and closes

• 1 bottom Door Ice bin

• Remove items from the bin and area; disconnect power if working near electrical components
• Lift the old bin up and off the door tabs to remove
• Align the new bin with the door slots/tabs and press down until fully seated
• It sits level and secure before reloading items