Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Grease filter for range hoods and over-the-range microwaves. Dimensions: 5-7/8" x 7-7/8" x 3/32" (5.875 x 7.875 x 0.09375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.
Just installed it to the wall & presto... Read more
Microwave won't start or light stays on when door closes? A faulty door latch prevents proper switch engagement. DIY repair typically takes 15-20 minutes.
With parts from you my son repaired the door and now microwave is operating perfect.,.... A 10 minute job for him!... Thanks for not having to buy a new one!!!!! Read more
The Door Switch is an OEM replacement part for Frigidaire wall ovens. It is a component located on the oven door that detects when the door is opened and closed. The door switch works alongside the control board to regulate oven operations based on door position.
Symptoms of a bad door switch can include:
Causes relate to normal wear over extended use as the door switch mechanism cycles with frequent door openings and closings. Moisture exposure or impacts could also degrade switch performance.
This OEM Frigidaire switch is compatible with Amana, Jenn-Air, KitchenAid, and some Electrolux wall oven models as well.
I diagnosed this problem via the web and the advice was spot on. The problem was a failure of the bottom door switch. I used a multimeter to verify that the switched never closed properly. It took me a minute to figure out how to remove the old switch (press a release tab under the switch while simultaneously rotating counter-clockwise). That was about the most difficult part of the repair. Read more
Restores interior and cooktop lighting in your microwave. Replace when bulb burns out or dims for clear visibility. Verify fit with your model number.
I replaced the bulbs in my over stove microwave light. Read more
This replacement motor restores reliable rotation to the component it drives—bringing back proper airflow or mechanical movement so your appliance runs as designed and noise is minimized.
Start bye removing the three screws that hold the underside of the microwave up. Once those are undone, the panel pivots down. You then need to un-attach the lights so the panel will totally come off and out of the way. The motor is plainly visible. Remove the power plug and remove the one screw then it twists out of its slot. Install the new motor and reverse the directions. Read more
Replacement spring for microwave door latch mechanism. Restores return tension so the latch engages and releases correctly. Needed when spring is broken or worn.
Replacement glass turntable tray for your microwave. Installs on the rotating support to hold food during cooking. Replace if cracked, chipped, or broken.
A phone call to your company where a very helpful sales associate took the information I gave him including the model number of my Microwave oven. He assured me the one he recommended would be the correct size--and it was!! The item came to my address in 2 days in perfect condition and I washed it and placed it on the turntable. Couldn't have been easier, I just wish I'd done it sooner because trying to use a plate from another used Microwave oven was not successful! A very satisfied... Read more
Fix a microwave door that won't close or sticks when opening. This latch hook secures the door mechanism for proper sealing. DIY repair in under an hour.
This part was an exact replacement. I removed the door and took out the old part and replaced it with the new one. Getting the door off was the hardest part. Read more
Checked on AppliancePartsPros and found the parts, once I received the parts I pulled the outer cover of the microwave and replaced the three switches. For the price of the three switches it was cheaper to install all new. Total repair time, 15 minutes. Microwaves back up and running. Very easy fix. Read more
Controls airflow in your microwave's exhaust vent system. Installs between blower and duct. Replace if cracked, broken, sticking, or missing.
It took less than a minute to find the replacement part on your website and another minute to order it. The damper was delivered well packed and in good condition in a day and a half. It took about 15 minutes to install using only a small straight slot screwdriver to lift the tabs on the oven top. Read more
Replacement mounting screw secures panels, trim, and components in microwaves. Needed when original screws are stripped, missing, or lost during repairs.
I ordered a replacement handle from Appliance Parts Pro.com and installed it after watching the video at their site for a similar model. The video told of the trick on removing the door surround that allowed me to access the handle screws. I purchased new handle screws at the same time I bought the new handle. The new handle and screws were a bit different than the original but fit perfectly. Hopefully it will be more durable than the original handle. Read more
Replacement mounting screw that secures panels, trim, and components in ranges and ovens. Needed when original screws are lost, stripped, or damaged.
Black exhaust louver grille that covers the vent opening on your microwave. Replace if cracked, broken, or missing to restore a finished appearance.
This is a black plastic lens and frame assembly that covers the interior lamp on a microwave oven. It protects the light bulb from grease and moisture while diffusing light inside the cooking cavity. Replace this lens if it is cracked, yellowed, melted, or missing, which can leave the bulb exposed to splatter and reduce interior illumination.
Replacement screw fastener for microwaves. Secures panels, brackets, and trim pieces in place. Needed when original screws are stripped, lost, or missing.
Watched under dishwasher during rinse cycle to see if I could determine where it was leaking. Could not. So watch a number videos to give me an idea what might be the problem. The suspect was the drain hose. So I pulled out the dishwasher and removed the drain hose. Hose looked ok, but during the removal a rubber check valve fell out from drain pump. It was obviously damaged and severely corroded. So I replaced both pump and hose. Easy enough. Turn off power. Disconnect water... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.