Cgs700p2ms1 Parts

This replacement screw secures appliance components so panels, brackets, and trim stay tight and aligned. Use it to replace a missing, stripped, or rusted fastener and restore a solid, rattle-free fit in the affected assembly.

• Fastens parts to the chassis/frame or mounting brackets
• Replaces lost, damaged, or corroded hardware
• Can help address loose or vibrating panels and minor misalignment
• Maintains a secure attachment during normal operation

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location and reuse any clips or washers if present
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair/replace damaged receiving threads or clip for proper hold

The Plunger Switch is an OEM part for GE gas ranges. It is an electro-mechanical component that activates the burners and bake/broil modes when the oven door is securely closed.

Causes of failure include worn contact points, damaged wiring, or defective internal components.  

Symptoms of a bad plunger switch include:

• Inability to select oven cooking functions when door is closed
• Error messages related to unsafe door conditions  
• Random activation of burners with door open 
• Failure of door interlock safety feature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas range models. 

The Medium surface burner base is an OEM part for GE ranges. It serves as the base for the surface burners, covering and protecting the burner cavities.

Causes of a bad surface burner base include warping or deformation from high heat over time, cracks or breaks from impact damage, or corrosion from liquid spills or grease accumulation.

Symptoms of a bad surface burner base include:

• Burners no longer sitting flush or securely on the cooktop surface
• Excessive air gaps around the burners allowing gas/flames to escape
• Difficulty cleaning due to liquid leaks into the burner cavities
• Visible cracks, breaks, or deformities in the material

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This stainless steel griddle control knob restores smooth, accurate control of your range's griddle. Replace a cracked, worn, or missing knob to regain proper grip, alignment, and a clean factory look.

• Attaches to the griddle control shaft to select and adjust heat
• Direct replacement when the original is cracked, stripped, loose, or missing
• Helps the pointer align correctly with OFF and temperature settings
• Common symptoms: knob spins without turning the stem, falls off, or has damaged finish

• Disconnect power and shut off gas before servicing
• Ensure the control is in the OFF position and the surface is cool
• Pull the old knob straight off the stem; align the new knob with the stem and press firmly until fully seated
• Verify smooth operation and correct OFF alignment before use

This bake burner is the oven's primary bake flame assembly, restoring proper heat for even baking and roasting. Replace a damaged or corroded burner to regain reliable oven temperatures. What it does:

• Provides the main bake flame that heats the oven cavity for baking and roasting.
• Works with the range's ignition system to light the burner; a failed burner can prevent the oven from lighting.
• Common symptoms: oven won't reach temperature, burner won't light, weak or uneven flame, or uneven/slow cooking.
• Designed to fit the oven floor area and direct heat across the bake cavity for consistent results.

• Turn off both the gas supply and electrical power to the appliance before servicing.
• Allow the oven to cool completely and use basic hand tools; keep track of mounting hardware.
• Inspect the ignition electrode and burner ports for debris during replacement; do not bend or damage the electrode.
• After installation, check connections and test for proper ignition and a steady flame; if you smell gas or see a faulty flame, shut off gas.

Replacement front frame bumper that cushions and supports the appliance's front frame or door trim, helping reduce vibration and prevent metal-on-metal contact—restoring a secure, quiet fit for the door or trim assembly. What it does:

• Cushions the front frame/door trim to prevent wear, chipping, and metal rubbing.
• Helps align and stabilize the door/frame for proper closing and fit.
• Reduces rattling and vibration noise during operation.
• Commonly replaced when the door feels loose, rubs against the cabinet, or makes noise.

• Disconnect power to the appliance before beginning any repair.
• May require removal of the door trim or front panel—use basic hand tools and keep fasteners organized.
• Seat the bumper fully in its mounting location; avoid forcing or deforming the part.

The Ss Cntrl Knob is an OEM replacement part for stainless steel GE ranges. Each individual knob operates the corresponding burner, allowing for precise temperature and heat level selections.

Causes of a bad knob can include normal wear and tear from frequent use over the years. The interactive mechanisms inside may become loose or damaged. Residue buildup on the shaft or button area could inhibit smooth rotation. 

Symptoms of a bad Ss Cntrl Knob include:

• External cracks, breaks or deformities in the knob material
• Looseness, wobbling or detachment from the range surface 
• Inability to select desired temperature or burner settings

This OEM GE replacement knob is also compatible with Hotpoint, RCA, and some Kenmore models.

The Central Grate is an OEM part for GE gas ranges. This central grate sits directly above the burner in the center of the range, providing an additional cooking surface. With a flat and smooth surface, it supports various sizes and types of cooking pots and pans over the middle burner.

Causes of a bad central grate can include general wear and tear over time. The continuous exposure to high heat can slowly degrade steel fasteners and welds. Accidental impacts from cookware being placed on the grate can also damage it.

Symptoms of a bad central grate include:

• Warping or sagging of the grate plate from high heat
• Cracks or broken welds from years of use
• Loose fasteners or mounting points that cause instability
• Large scratches or pits that trap food debris

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Grate Asm is an OEM component specifically designed for GE gas ranges. This grate sits over the cooktop burners as well as the mounting hardware to securely install them. It distributes heat evenly while protecting the burners from spills, burns or other potential damage from cookware. 

Symptoms of a bad grate assembly include:

• Grates that are warped, cracked, or discolored from heat 
• Loose, wobbly, or improperly positioned grates over burners
• Missing hardware or components that prevent the secure mounting of the grates
• Inability to move cookware smoothly across the surfaces

Causes of failure can include breaks or cracks formed from heavy pots/pans, deterioration of mounting hardware over years of use, or damage incurred during cleaning.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This genuine replacement screw secures panels, trim and small components on compatible appliances to restore proper fit and prevent rattling or gaps. Use it when a missing or damaged fastener causes loose or misaligned parts. What it does:

• Fastens panels, bezels, trim pieces and small assemblies to the appliance frame
• Restores secure fit to eliminate rattling, vibration noise or loose trim
• Replaces stripped, rusted or missing screws that prevent proper alignment

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct screwdriver or driver bit to prevent stripping the head
• Tighten securely but avoid over-torquing; excessive force can strip threads or crack plastics
• Keep removed fasteners organized to ensure correct reassembly

This Wi-Fi module kit replaces the appliance's wireless communications board to restore smart connectivity and app features. Use it when your appliance can't join your home network or when remote functions stop responding. What it does

• Provides the wireless interface so the appliance can connect to a home Wi-Fi network and communicate with the manufacturer app or cloud services
• Restores remote monitoring and control features that rely on a network connection
• Addresses symptoms such as inability to connect to Wi-Fi, lost smart features, or communication-related error messages
• Works with the appliance's control system to enable firmware updates and remote diagnostics when supported

• One Wi-Fi module kit

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Follow the OEM service instructions for removal and installation; proper seating and connector alignment are required
• After installation, reconnect to your home network and complete any app/registration steps per the manufacturer's setup guide

Size: 8 - 32 inch.

Replacement door hinge designed to restore proper door alignment and smooth pivoting on compatible refrigerators. Helps stop door sagging, rubbing, and gaps to maintain an even seal and reliable cooling. What it does:

• Supports the door and provides a stable pivot point for opening and closing.
• Restores correct door alignment to prevent rubbing, uneven gaps, and seal failures.
• Commonly used when a door sags, sticks, hangs unevenly, or no longer seals properly.

• Basic hand tools (screwdriver, socket/wrench) are typically required; follow manufacturer instructions for your model.
• Support the door before removing the old hinge — heavy doors may require a second person or a support block.
• Disconnect power or unplug the appliance if working near electrical components; wear gloves and eye protection and check door alignment and seal after installation.

This tube burner supply is the replacement gas tube that delivers fuel from the range/oven valve to the burner, restoring proper gas flow for reliable ignition and consistent flame performance. What it does:

• Directs gas from the appliance valve to the burner for normal operation
• Replaces cracked, corroded, or clogged burner tubing that can cause fuel flow disruption
• Helps correct symptoms such as burners that won't light, weak or uneven flames, or intermittent ignition
• Restores a sealed path for gas to reduce leakage risk when installed and tightened correctly

• Turn off gas supply and electrical power to the appliance before beginning work
• Verify proper fit and orientation to the valve and burner; use the OEM clamp/hardware if provided
• After installation, check all connections for leaks (soap-and-water test) and restore power per the appliance manual

This machine control board with frame replaces the washer's main electronic controller, restoring the appliance's ability to run and manage cycles. It mounts in the control housing and connects to the washer's wiring harness. What it does:

• Controls and sequences wash cycles, timing, and user-selected settings
• Sends power/commands to motors, valves, and the dispenser during operation
• Responds to user inputs from the console and relays signals to other components
• Can resolve symptoms like a washer that won't start, won't complete cycles, or has unresponsive controls

• Disconnect power to the appliance before beginning any work
• Handle the board carefully to avoid static discharge or connector damage
• Access typically requires removing the control console/panel; keep fasteners and wire routing noted

This orifice spud meters gas to a burner, controlling flow for a correct, stable flame. Replace a clogged or damaged spud to restore reliable ignition and proper flame characteristics.

• Threads into the orifice holder to regulate gas flow to the burner head
• Helps maintain proper flame height and shape during cooking
• A clogged or damaged spud can cause weak/uneven flames, yellow tipping, or delayed ignition
• Replacing the spud can improve lighting and flame consistency

• Disconnect power and shut off gas; allow the appliance to cool completely
• Remove grates, caps, and burner heads (as applicable) to access the orifice
• Support the orifice holder while loosening/tightening the spud to avoid twisting the gas tube
• After reassembly, restore gas and check for leaks with an approved leak-detection solution; verify proper burner operation