Cgy366pat1w2 Parts

This tubing and nut assembly connects the appliance's water supply to the dispenser or ice/water system, restoring a sealed water line and preventing leaks. Fits where a short service tube with a compression nut is required. What it does

• Provides a sealed link between the household water line and the appliance's internal water inlet
• Replaces corroded, cracked, or leaking tubing and nut assemblies that cause visible leaks or loss of dispenser/ice function
• Restores proper water flow for ice makers and door dispensers when the original tube or nut is damaged
• Designed to mate with the appliance's existing inlet fitting using a compression-style nut

• One tubing section with attached compression nut as shown

• Turn off and relieve household water pressure before beginning work
• Use proper-sized wrenches and avoid overtightening the compression nut to prevent damage
• Inspect ferrule/seat and replace if worn to ensure a leak-free connection

This ignition module mounting bracket secures and positions the stove/oven spark ignition module for reliable spark alignment. Replacing a damaged or bent bracket restores proper module placement to help resumes normal ignition. What it does:

• Secures the ignition/spark module to the appliance chassis so the electrode aligns with the burner.
• Keeps the module stable to prevent intermittent or no-spark conditions caused by a loose or misaligned module.
• Helps maintain correct wire routing and strain relief to reduce connector or wiring stress.
• Can prevent rubbing or contact that may cause intermittent clicking or failure to ignite.

• One ignition module mounting bracket.

• Disconnect electrical power and shut off gas supply before beginning service.
• Handle the ignition module and electrode carefully to avoid damage; support the module while removing/installing the bracket.
• Retain and reuse original screws or fasteners unless replacements are specified by the manufacturer.

This small set screw secures components inside your refrigerator. Replacing a missing or stripped set screw restores a tight, reliable hold so attached parts stay aligned and are less likely to loosen or rattle during use.

• Fastens an attached part to its mounting point to prevent movement or slipping
• Helps maintain proper alignment of handles, brackets, or trim pieces
• Reduces wobble, vibration, and rattling noises caused by loose hardware
• Replaces missing, stripped, or corroded set screws

• Unplug the refrigerator and shut off water if working near door/dispenser areas
• Support the part being secured; start the screw by hand to avoid cross-threading
• Tighten with the correct driver for your model; do not overtighten to prevent stripping
• The component is secure and aligned before restoring power

Fix squealing noises or convection that shuts down after preheating. This oven fan motor circulates air for even baking and roasting. Common DIY repair.

This side support panel replaces a damaged or missing support on the appliance's side, helping secure and align the cabinet and trim so the unit sits solidly and looks finished after installation or service. What it does:

• Provides structural support for the side of the appliance cabinet and adjacent trim
• Helps maintain correct spacing and alignment next to countertops or panels
• Replaces a bent, warped, or corroded panel
• Reduces rattles or rubbing caused by a loose side assembly

• One side support panel

• Disconnect power; turn off gas supply before servicing
• Carefully pull the unit forward for side access; support it to prevent tipping
• Remove fasteners, transfer any clips/brackets from the old panel, and reinstall with existing hardware
• Wear cut-resistant gloves and verify clearances and level before final tightening

Size: 8-18 x 1/2 inch.

Replacement power cord for gas ranges. Installs at the rear connection to supply mains electricity. Order when your original cord is frayed, cut, damaged, or worn.

Controls gas pressure to burners and oven for consistent flame and safe operation. Replace if cracked, leaking, or damaged to restore proper gas flow.

Stainless steel cleaner for gas ranges and cooktops. Restores shine and removes fingerprints, smudges, and streaks from exterior surfaces.

This housing transceiver is the outer mounting enclosure that secures and protects the appliance's transceiver assembly, helping maintain reliable signal and control communication. It replaces cracked or broken housings to restore proper fit and protection. What it does:

• Holds and protects the wireless/transceiver module and related wiring from physical damage
• Helps maintain proper alignment and connection to the appliance control assembly
• Common symptom: damaged or cracked housing that exposes electronics or prevents secure mounting
• Common symptom: intermittent signal or communication issues when the transceiver is loose or misaligned

• One housing transceiver

• Disconnect power to the appliance before beginning any repair to avoid shock or component damage
• Handle the transceiver and circuit connections carefully to avoid bending pins or ESD damage
• Installation typically requires removing the control console or access panel and a few fasteners; keep track of screws and gaskets

Warped or damaged oven floor? This inner bottom panel restores a flat cooking surface and proper heat distribution in your gas range cavity.

Replace your worn, cracked, or missing range control knob with this stainless steel finish knob. Installs on the control panel for secure grip.

Oven bottom dirty or stained? This pan catches drips and shields heating elements from spills. Straightforward replacement for a cleaner oven interior.

Stainless steel bezel that fits around gas cooktop control knobs. Replace worn, scratched, or missing trim to restore a clean, finished look.