Cmt Thermatronic 2 Model Parts

This is the glass turntable tray that sits on the roller ring inside your microwave. Replacing a worn, cracked, or missing tray restores a stable surface and proper rotation for more even heating.

• Rotates with the turntable support to help heat food evenly
• Replaces a cracked, chipped, or missing glass tray
• Restores a stable, level surface for cookware
• Helps correct wobbling caused by a damaged tray or center socket
• Ensures proper engagement with the drive coupler when seated correctly

• Disconnect power and let the oven cool before handling glass
• Remove the old tray; clean the roller ring and drive coupler
• Align the tray's center with the coupler and set it on the roller ring
• Verify it sits flat and turns freely by hand before use

This door switch detects when the door is fully closed and latched. Replacing a worn or stuck switch restores safe, consistent start/stop behavior and ensures the unit only runs with the door securely shut. What it does:

• Senses door position and signals the control to enable/disable operation
• Prevents the appliance from running with the door open
• Resolves issues such as: won't start despite power, stops when the door is jostled, "close door" message, or needing to press on the door to run
• Helps restore reliable cycle start and proper safety interlock function

• 1 door switch

• Disconnect power at the breaker before servicing
• Access the switch behind the door panel or latch area; note wire locations or take a photo
• Move wire connectors to the new switch one at a time; ensure terminals are fully seated
• Reassemble and test door closure and operation before returning to service

A replacement high-temperature cut-out that helps protect ovens by interrupting power if internal temperatures rise above safe levels. Restores the appliance's over-temperature protection so heating elements can be safely shut off when needed. What it does:

• Monitors oven temperature and opens the circuit if temperatures exceed a safe threshold to prevent overheating.
• Stops power to heating elements when tripped, preventing further temperature rise.
• Common symptoms of a failing cut-out: oven won't heat, continuous heating or no control over temperature, or oven shuts off unexpectedly.
• Used as a safety device in the oven's temperature-control system.

• Disconnect power at the breaker and allow the appliance to cool completely before servicing.
• Replace with the exact OEM cut-out and secure all wiring connections.

This mounting bracket secures the door lock/latch assembly to the washer's front panel, keeping the latch properly aligned so the door locks and unlocks reliably during cycles. Replacing a damaged bracket helps restore safe, consistent door operation.

• Holds the door latch assembly firmly in place
• Helps prevent door lock errors and incomplete cycles caused by misalignment
• Common symptoms include door not locking, cycle not starting, or "Door Locked" error codes
• Maintains correct latch position to reduce vibration-related issues

• Unplug the appliance before servicing
• Access is typically from the front; remove the door gasket clamp to reach the latch area
• Support the latch assembly while swapping the bracket to avoid straining wiring
• Test door operation and run a short cycle check after reassembly

Size; 8-18 x 1/2 inch.

A replacement glass turntable plate that restores a microwave's rotating cooking surface for even heating and stable cookware support. Fits on the drive roller to provide a flat, heat-safe surface for daily microwave use. What it does:

• Replaces a cracked, chipped or missing glass turntable so food heats more evenly
• Provides a stable surface for plates and bowls to rotate during cooking
• Works with the turntable roller and coupling to restore proper rotation
• Prevents wobble and scraping that can occur with damaged glass

• Unplug the microwave or disconnect power before installing
• Handle the glass carefully to avoid cuts; do not install if chipped or cracked
• Align plate on the center drive coupling/roller support; it seats and rotates freely
• Use only the exact OEM plate size and part number to ensure proper fit

This is a genuine replacement mounting screw used to secure appliance panels and components. It restores proper fastening to reduce vibration and prevent parts from loosening during normal operation. What it does:

• Secures panels, brackets, or trim to the appliance frame
• Prevents rattling or vibration caused by loose fasteners
• Keeps wiring and small components held in place
• Helps maintain proper alignment of removable parts

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Start threads by hand, then tighten until snug; do not overtighten
• Keep removed fasteners organized to ensure correct reassembly

This LIS switch (CMT) is a direct-replacement electrical switch that restores reliable circuit signaling for the appliance control system, helping return proper operation to affected functions. Designed to fit the original mounting and connector layout. What it does:

• Acts as the LIS (logic/interlock/signal) switch that opens or closes an electrical circuit when actuated.
• Restores reliable communication between the door/control assembly and the appliance control board.
• Commonly used to address symptoms such as intermittent operation, failure to start, or unresponsive controls.
• Matches OEM form and connector style for a straightforward replacement.

• Disconnect power (unplug or switch off breaker) before attempting any repair.
• Use basic hand tools; note connector orientation before removal to ensure correct reinstallation.
• Handle the switch and wiring harness carefully to avoid damage to terminals or insulation.

This diode is a small rectifier used on the appliance control electronics to allow current to flow in one direction, protecting the board and enabling proper control signals. Replacing a failed diode restores correct circuit behavior. What it does:

• Provides one-way current flow on the control board to prevent reverse voltage
• Protects sensitive electronics from backfeed and voltage spikes
• Can prevent control errors caused by a shorted or open diode
• Commonly replaced when control circuits fail to power or behave intermittently

• Disconnect power to the appliance before accessing controls to avoid shock
• Handle circuit boards and components with ESD care; avoid touching traces and contacts

This high-voltage magnetron capacitor stores and delivers the pulse of energy the microwave magnetron needs to generate heat. Replacing a failed unit restores proper high-voltage function so the oven can heat reliably. What it does:

• Stores and releases high-voltage energy to the magnetron during cooking cycles.
• Works with the oven's diode and transformer to produce microwave energy.
• A failed capacitor can cause no heat, weak heating, or a blown fuse/circuit interruption.
• Designed for the microwave high-voltage assembly; handle as a high-voltage component.

• Disconnect power and unplug the appliance before service.
• Discharge the capacitor with an insulated tool before touching terminals.
• Verify this part number matches your appliance before ordering.

This latch knob kit replaces a broken or worn dishwasher door latch knob to restore secure door operation and a finished appearance. It installs at the front of the dishwasher door to engage the latch assembly. What it does:

• Replaces a damaged or cracked door latch knob so the door can be closed and latched properly
• Restores a secure grip for opening and closing the dishwasher door
• Helps eliminate rattling or improper door engagement caused by a missing or loose knob
• Matches white trim and visible door components for a clean finish

• Disconnect power to the appliance before starting any repair
• Removal of the inner door panel or trim may be required; follow the steps
• Handle small parts carefully and keep fasteners organized during reassembly

This mounting bracket secures a dishwasher component to the cabinet or chassis, restoring proper panel alignment and reducing movement. It's a simple replacement for a bent, broken, or missing bracket to improve fit and quiet operation. What it does:

• Provides a secure mounting point for door/panel or internal components
• Keeps panels and trim aligned to prevent gaps and rubbing
• Reduces rattling or movement caused by a loose or damaged bracket
• Restores stable attachment after impact or corrosion-related failure

• Disconnect power and turn off the water supply before starting work
• Basic hand tools (screwdriver, nut driver) are typically required
• Support the panel or component while removing and installing the bracket to prevent dropping
• If fasteners are corroded or damaged, replace them with like-for-like hardware