Ddt595ssjss Parts

This top attachment strip secures the appliance's top panel and provides the mounting point for the door strike, restoring a stable, properly aligned front. It prevents panel movement and reduces rattles for a snug fit and reliable door engagement. What it does:

• Secures the top/front panel to the cabinet to maintain alignment and fit
• Serves as the mounting point for the door strike or latch components
• Helps eliminate rattling, vibration, and gaps at the top of the door area
• Restores reliable door engagement and prevents the strike from shifting

• Disconnect power to the appliance before beginning any repair
• Remove the top panel or access screws to reach the attachment strip; a screwdriver set is typically required
• Handle mounting tabs and edges carefully to avoid bending or damage
• Verify alignment of the door strike and test door closure after installation

This replacement screw fastens and secures appliance components where a 1/4-28 threaded flange screw with an internal hex washer head is required. It restores proper fit and helps prevent movement or rattling of panels and assemblies. What it does:

• Secures panels, brackets and components that use a 1/4-28 threaded flange screw
• Internal hex washer head allows a compact, low-profile drive for tight spaces
• Helps stop looseness, vibration noise, and misalignment when the original fastener is missing or worn
• Matches OEM fit and fastening form for reliable reassembly

• Disconnect power and follow all appliance safety procedures before servicing
• Use the correct hex driver/socket to avoid stripping the head
• Tighten to snug fit—do not overtighten to avoid damaging threads or mating parts
• Replace with identical part number to ensure proper fit and function

This small plastic clip secures a refrigerator's wiring conduit or harness to the cabinet, keeping wires routed and protected from abrasion. It helps reduce strain on connections and prevents wires from contacting moving parts. What it does:

• Holds wiring conduit or harness in place to maintain neat routing
• Prevents wires from rubbing on sharp edges or moving components
• Reduces strain on electrical connections that can cause intermittent faults
• Helps maintain safe separation between wiring and high-heat or mechanical areas

• Turn power off at the appliance and unplug before inspecting or replacing wiring clips
• Remove access panels only as needed to reach the clip; avoid stressing surrounding wires
• Snap the clip into the original mounting slot or replace any damaged fasteners for a secure fit
• If wires show damage or burns, replace the wiring/harness

This drain pump hanger secures the washer's drain pump to the outer tub, keeping the pump and hoses aligned so the pump can remove water reliably. Use it to replace a cracked or broken support that lets the pump shift. What it does

• Holds the drain pump firmly in place and maintains proper pump alignment.
• Helps reduce pump vibration and noise from a loose or mispositioned pump.
• Prevents the pump from pulling on hoses or becoming dislodged during the spin/drain cycle.
• A worn or broken hanger can contribute to poor draining, intermittent drainage, or unusual pump noise.

• One drain pump hanger.

• Disconnect power to the washer before beginning any repair.
• Access typically via the washer's lower front or rear panel; follow for disassembly.
• Inspect and reuse mounting hardware and grommets if undamaged; replace if corroded or broken.

This left-side door trim piece restores the exterior appearance and proper fit of a damaged or worn appliance door. It replaces cracked, chipped, or loose trim to help the door close and sit correctly in the frame. What it does:

• Covers and protects the left edge of the door while providing a finished appearance
• Replaces cracked, broken, or cosmetically damaged trim
• Helps maintain correct alignment of the door edge and attachment points
• Secures to the door with factory mounting tabs or screws
• Useful when left-side trim has snapped, warped, or come loose

• One left side door trim

• Disconnect power and/or fuel supply before beginning any repair
• Use appropriate hand tools; support the door to prevent dropping or damage
• Inspect mounting tabs and nearby components; replace any broken fasteners
• Follow the appliance service manual for disassembly and torque/spec guidance

This control box bottom is the lower housing that protects and supports the appliance's control electronics, helping keep wiring and components secure from debris and moisture. Fits into the control assembly to restore proper enclosure and support. What it does:

• Provides a protective lower enclosure for the control board and wiring harness
• Helps keep dust, lint and moisture away from sensitive electronics
• Secures the control board and related connectors in their correct position
• Prevents rattling or movement that can cause loose connections or noise

• One control box bottom (base cover) as pictured

• Disconnect power before servicing to avoid shock or component damage
• Handle electronics carefully and avoid touching circuit contacts
• Installation typically requires basic hand tools and removal of the control housing

This tub-mount sleeve is a replacement mounting sleeve that helps secure the washer tub and reduce wear where the tub attaches to the cabinet. Restores proper alignment and helps prevent rubbing or noise from a worn mount area. What it does:

• Provides a durable bearing surface where the tub mounts to the washer cabinet
• Helps keep the tub properly centered to reduce rubbing, vibration, and related noise
• Replaces worn or damaged sleeve surfaces that can cause tub movement or abrasion
• Commonly used when tub mounting points show visible wear or the tub shifts during cycles

• One tub-mount sleeve

• Turn off and unplug the appliance and shut off the water supply before beginning any repair
• Inspect surrounding mounts, seals, and fasteners; replace any additional damaged components as needed
• Use appropriate tools and follow OEM disassembly steps to access and press or slide the sleeve into place

The Filter Adapter is an OEM component specifically designed for GE dishwashers. Located inside the dishwasher tub, it functions to strain out large food particles from water before it reaches the wash arms.  The adapter holds the removable wash/rinse filters in place during operation, functioning as an extension of the filtration system. 

Causes of a bad filter adapter can include cracks or breaks compromising its sealing surface, wear and tear deforming filter retention features over time, or buildup inhibiting functionality.

Symptoms of a bad filter adapter include:  

• Loose or falling out removable filters during washing  
• Bypassing of food particles around compromised seals
• Reduced lifespan of disposable filters placed in a faulty adapter
• Debris accumulation impacting spray arm performance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Outer Door Assembly Kit is an OEM replacement part for GE dishwashers. It includes all of the key external door components needed for proper function, including the inner and outer door panels, sealing gaskets, locking mechanisms, and design elements. 

Causes of a bad outer door assembly can include wear and tear over time, especially to sealing gaskets which are prone to cracking. Higher humidity levels can accelerate this. Physical damage such as dents or cracks in the plastic panels will also necessitate replacement.

Symptoms of a bad outer door assembly include:

• Water leaks into the interior due to compromised seals 
• Difficulty closing and locking the door securely
• Gaskets that no longer create an airtight seal around the door perimeter
• Loose, sagging, or damaged door panels

This replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This harness assembly routes AC power and control signals between components to restore electrical connectivity and reliable operation. Replaces a damaged or burned wiring harness to help eliminate intermittent power, no-start, or control faults. What it does:

• Provides the factory wiring connections for AC power and control circuits
• Replaces frayed, burnt, or disconnected wires that cause intermittent operation or no power
• Restores proper connector fit to ensure secure electrical contact
• Helps address symptoms such as appliance not starting, sporadic operation, or blown fuses/circuit breakers

• Disconnect power before servicing to avoid electrical shock
• Inspect connectors and mounting points; secure harness away from sharp edges and heat sources
• Match connector shapes and pin counts; do not force connectors together

This coated frame wire assembly replaces a damaged or corroded structural wire used to support and retain internal components. The protective coating helps resist rust and reduces wear for reliable, long-lasting support. What it does:

• Provides structural support and shape for the appliance frame or internal assembly
• Secures or positions components that attach to the wire frame
• Protects against corrosion and wear with a durable coating
• Common symptom indications: visible bending, breakage, loose or rattling parts, or components no longer held in place

• Disconnect power to the appliance before beginning any repair.
• Use basic hand tools; handle carefully to avoid sharp edges and protect the coating.
• Replace only with the same part to ensure fit and function.