Dlgx4201 Parts

This Taptite screw is a factory thread-forming fastener used to secure panels, brackets, and internal components where specified by the manufacturer. It forms threads as it drives for a secure, long-lasting hold when replacing a missing or damaged screw.

• Fastens covers, brackets, and internal parts at the designated mounting points
• Thread-forming "Taptite" design creates mating threads in the receiving hole for a snug fit
• Helps restore alignment and reduce vibration or rattling from loose hardware
• Typical symptoms: loose or misaligned panel/handle, rattles during operation, missing or stripped screw

• Disconnect power (and shut off water/gas if applicable) before servicing
• Replace only in the exact location specified for this part; match head style and length to the original
• Start by hand to avoid cross-threading; if resistance is high, back out and re-start
• Tighten until snug; do not overtighten to prevent stripping or cracking

A small mounting bracket that secures and supports internal appliance components to keep shelves, drawers or assemblies aligned and stable. Replaces a cracked, broken or missing supporter to restore proper fit and reduce movement. What it does

• Secures an internal component or assembly in place to prevent sagging or misalignment
• Stops rattling, wobble or looseness caused by a damaged or missing bracket
• Restores correct clearance and support for the associated shelf/drawer/assembly
• Helps maintain normal operation and prevents further wear on adjacent parts

• One supporter holder bracket

• Disconnect power before starting repairs; unplug or flip the appliance breaker
• Remove nearby shelves, drawers or panels to access the damaged bracket
• Inspect mating parts for damage and replace any worn fasteners as needed
• Use basic hand tools;

This inlet hose routes household water into the appliance so it can fill and operate correctly. Replacing a damaged inlet hose restores proper water flow and prevents leaks that can cause poor performance or water damage. What it does:

• Channels incoming water from the household supply into the appliance
• Stops leaks and restores normal fill when the original hose is cracked, split, or worn
• Helps correct symptoms like no water entering the appliance, slow or intermittent fill, or visible leaking at the hose connection
• Works with the appliance's valve and fittings to maintain a sealed water path

• Turn off the water supply and unplug the appliance before starting any work
• Inspect fittings and seals; replace any worn gaskets to ensure a watertight connection
• Hand-tighten connections then check for leaks; avoid overtightening plastic fittings

This power cord assembly supplies AC power to the appliance and restores safe operation after a damaged or faulty cord. It replaces the worn or frayed factory cord so the appliance can power on reliably. What it does

• Provides the main AC connection between the appliance and household power
• Replaces cords with visible damage, exposed wiring, burnt connectors, or intermittent power
• Helps stop arcing, sparking, or overheating caused by a failing cord
• Fits into the appliance's cord terminal block for a direct, plug-in power connection

• One power cord assembly

• Disconnect power at the breaker or unplug the appliance before starting any work
• Tighten all terminal screws securely and route the cord away from sharp edges and moving parts

The High Limit Thermostat Kit is an OEM part for LG dryers. It acts as a safety device that prevents the dryer from overheating by cutting off power to the heating element if the dryer exceeds a certain temperature.

Common causes of a faulty thermostat include regular wear and tear, electrical issues, or a malfunction in the heating system that causes the thermostat to overwork.

Symptoms of a bad High Limit Thermostat include:

• Dryer not heating at all
• Dryer overheating or shutting off unexpectedly
• Clothes taking longer to dry
• The dryer being unusually hot to the touch

This OEM LG part is also compatible with Sears/Kenmore models.

Includes High limit and safety thermostats.

This Main PCB Power Control Board Assembly is the electronic control that manages power distribution and user commands for the appliance, restoring proper control and operation when the original board fails. What it does:

• Regulates power to major components and coordinates control signals for normal operation
• Interprets inputs from the user interface and translates them into appliance actions
• Can cause power loss, erratic operation, or unresponsive controls if faulty
• Common symptoms: appliance won't power on, intermittent power or cycles, error codes or unresponsive controls

• Disconnect all power to the appliance before accessing or replacing the control board
• Handle the board carefully and avoid static discharge; use anti-static precautions if possible
• Verify the part number on the existing board before installation to ensure correct fit

This is the rear tub drum for the washer's drum assembly; it supports the inner drum and helps keep loads balanced so the washer can tumble and spin properly. Use this part to restore stable drum rotation and reduce rubbing or banging noises. What it does:

• Supports the inner wash basket and maintains proper alignment during spin cycles
• Keeps the drum centered to prevent rubbing against the cabinet or seal
• Helps reduce loud banging, wobbling or excessive vibration during operation
• Works with the tub seals, bearings and suspension to maintain smooth rotation

• One rear tub drum

• Disconnect power and water before beginning any repair
• This is a major drum component; expect to remove the outer cabinet and other assemblies to access it
• Support the inner drum while separating components; bearings, seal and hardware may need inspection or transfer

A replacement top plate assembly that restores the cooktop surface and mounting for burners and controls, returning a smooth, stable cooking area. Helps protect internal components and maintains proper burner alignment. What it does

• Replaces a cracked, chipped, or warped cooktop top to restore a flat, stable cooking surface
• Provides the mounting surface for heating elements and control assemblies so burners sit correctly
• Prevents debris from dropping into internal cavities that can affect operation or create odor/smoke
• Helps maintain proper spacing and alignment for consistent heating performance

• One top plate assembly

• Disconnect power at the breaker before starting any repair to avoid shock hazard
• Handle the plate carefully—edges and glass sections can be sharp or brittle; use gloves and eye protection
• Installation typically requires removing the cooktop or range surface and unplugging element/connectors; keep screws and hardware organized

This tub assembly is the washer's inner drum that holds and rotates laundry during wash and spin cycles, restoring proper agitation and spin performance for units with a damaged or worn drum. What it does

• Houses and tumbles clothes so water and detergent move through fabric during wash cycles
• Enables balanced spinning and high-speed rotation during the spin cycle
• A damaged or warped drum can cause loud banging, scraping noises, or clothes abrasion
• Cracks or severe damage may allow water to contact bearings or seals, causing further wear

• Disconnect power and water supply before beginning service
• Replacing the drum requires partial disassembly of the washer cabinet and suspension components; keep fasteners organized
• Inspect and replace related wear items (seal, bearings, spider/bolts) if they show damage

This frame bracket secures and supports appliance panels and structural components to restore proper alignment and reduce movement. It's a direct-fit replacement that helps stop panel rattling and keeps connected parts stable during operation. What it does:

• Secures the appliance frame or panel to the cabinet to maintain proper alignment.
• Provides structural support to prevent flexing or sagging of connected components.
• Reduces rattling, vibration, and noise caused by a loose or broken bracket.
• Common symptom: visible looseness, misaligned panel or persistent vibration during use.

• Disconnect power (and water if applicable) before beginning any repair.
• Use the OEM service manual or exploded parts diagram for correct placement and fastener locations.
• Typical installation requires basic hand tools; inspect surrounding mounting points and hardware and replace if worn.
• If the bracket is plastic, avoid overtightening screws to prevent cracking.