Dsf25kgtebg Parts

This power cord assembly supplies electrical power from the wall outlet to your refrigerator. Replace a cut, frayed, or overheated cord to restore safe, reliable operation and eliminate intermittent power loss caused by a damaged cord. What it does:

• Provides the electrical connection between the household outlet and the refrigerator's wiring
• Helps resolve no-power or intermittent power when the cord is moved
• Addresses visible damage such as cuts, cracks, fraying, or a melted/discolored plug
• Mitigates arcing, sparking, or a burning odor originating from the cord or plug area

• One power cord assembly

• Disconnect power by unplugging the unit or switching off the circuit breaker before servicing
• Pull the refrigerator forward for access; note the original cord routing and connections
• Install the new cord along the same path and secure any built-in strain relief; ensure the ground connection is properly seated
• Restore power and verify operation

Includes 12 washers.

A small metal retainer spring that secures trim and lightweight components so panels and shelves stay aligned and do not rattle. Replaces a worn or broken spring to restore a snug, reliable fit. What it does

• Holds trim, panels or lightweight components in position to prevent sagging or separation
• Stops rattling and vibration caused by loose parts
• Restores correct alignment of removable trim or small assemblies
• Helps maintain proper component engagement during normal use

• One retainer spring

• Disconnect power (unplug or switch off circuit) before working on appliances
• Use basic hand tools; access may require removing adjacent trim or clips
• Handle spring and surrounding trim carefully to avoid scratches or damage
• Replace damaged or missing mounting hardware before reassembly

This mobility front assembly replaces the worn front caster/roller that helps a refrigerator glide when pulled out for cleaning or service. Restores smooth forward movement and stable front support for safe access. What it does:

• Provides a rolling front support so the appliance moves smoothly on the floor
• Helps stabilize the front of the refrigerator when it is pulled out or pushed in
• Reduces sticking and uneven movement caused by worn or damaged rollers
• Can help minimize scraping or surface damage during repositioning

• One mobility front assembly

• Disconnect power and, if applicable, water supply before servicing
• Empty or secure loose items and have a second person help when tilting or moving the appliance
• Remove the kickplate or access panel as required to reach and replace the front assembly
• Tighten fasteners to OEM torque and test mobility before returning the appliance to normal use

A stationary blades assembly that secures the stationary blade in place so the cutting or dispensing mechanism operates smoothly. Replacing a worn or broken assembly restores proper blade alignment and reduces noise or poor cutting performance. What it does:

• Holds the stationary blade securely to stabilize rotation and cutting action
• Maintains correct blade alignment to prevent wobble, jamming, or uneven cutting
• Helps reduce abnormal noise and vibration caused by a loose or damaged blade mount
• Restores reliable operation of the appliance's blade/dispensing mechanism when original part is worn or cracked

• One stationary blades assembly

• Disconnect power (or unplug) and turn off water supply if applicable before beginning repair
• Remove access panels or covers to reach the blade area; keep track of fasteners and trim
• Inspect mating parts (rotor, fasteners, seals) for wear and replace if damaged

This rear gasket cover secures the refrigerator door gasket and helps maintain a clean seal at the back edge of the door. It restores proper gasket alignment and helps reduce air leaks and moisture buildup. What it does:

• Holds the rear edge of the door gasket in place for a consistent seal.
• Helps prevent cold air loss and condensation by keeping the gasket aligned.
• Reduces rubbing and wear on the gasket edge caused by movement.
• Commonly replaced when the cover is cracked, missing, or allows the gasket to pull loose.

• One rear gasket cover.

• Remove power to the appliance before beginning any work.
• Typically installs by snapping or sliding into the door gasket channel; inspect surrounding trim for damage.
• Use basic hand tools; avoid forcing the cover to prevent breaking the part or the door.
• If gasket damage is present, replace the gasket as needed to ensure a proper seal.

This support slide holds and guides a refrigerator or freezer basket so it opens and closes smoothly, preventing sagging and keeping stored items accessible. It restores proper basket movement and alignment for safer, more reliable use. What it does

• Replaces a worn or broken slide that supports the basket and allows it to glide.
• Restores smooth in-and-out motion so the basket doesn't stick or bind.
• Prevents the basket from tipping or sagging when loaded.
• Helps reduce noise and uneven movement caused by damaged slides.

• Disconnect power to the appliance before starting any repair.
• Remove the basket or drawer to access the slide assembly; reinstall the slide in the same orientation.
• Align the slide with the mounting points and secure until it snaps/locks into place; verify smooth operation before returning items to the basket.
• Replace it with the correct OEM fasteners only.

This support slide secures and guides a refrigerator freezer basket so it opens and closes smoothly and stays aligned. It replaces worn or broken slides to restore proper basket support and movement. What it does:

• Guides the basket along its track for smooth in-and-out motion
• Helps keep the basket level and prevents it from sagging or tilting
• Replaces damaged or worn slide hardware that can cause sticking or uneven travel
• Addresses symptoms like a basket that won't slide smoothly, drops, or misaligns

• One support slide

• Turn off power to the appliance and remove stored items from the basket before starting
• Compare the old slide to the new one to confirm orientation and mounting points
• Install by aligning the slide with the mounting points and securing per OEM fastener locations

This silicon controlled rectifier (SCR) is an electronic switching device used to control power to oven/stove heating circuits, helping the appliance regulate temperature and heat output for cooking performance. What it does:

• Switches and regulates AC power to heating elements for controlled heat
• Enables cycle-based or phase-controlled heating used by oven/range controls
• Common replacement when an element won't heat consistently or unit won't maintain temperature
• Helps stop erratic heating caused by a failed power control component

• Disconnect power to the appliance before inspecting or replacing the SCR
• Observe ESD precautions and handle the component by insulated edges

This light reflector directs and protects the appliance lamp, improving illumination and preventing direct bulb contact. It restores proper light focus so interior areas are evenly lit and bulbs remain securely positioned. What it does:

• Reflects and directs light from the lamp for better interior visibility
• Shields the bulb from contact with food or components
• Helps maintain consistent light output and coverage
• Commonly replaced when light appears dim, uneven, or the reflector is cracked or missing

• Disconnect power to the appliance before servicing to avoid electric shock
• Remove the bulb before installing the reflector; handle bulbs and reflector with care to avoid damage
• Use only compatible replacement parts and follow the appliance manufacturer's instructions

This recessed trim piece replaces a bowed or damaged trim that surrounds a refrigerator recessed handle, restoring a clean appearance and secure fit. It covers the trim opening and helps keep the handle area sealed and finished. What it does:

• Replaces bent, warped or bowed recessed trim around the door handle area
• Restores the finished look and helps hold the handle trim in place
• Reduces gaps where dirt or moisture can collect near the handle
• Helps prevent the trim from catching or snagging when opening the door

• Disconnect power to the appliance before starting work when required for your model
• Remove door handle or existing trim per your model's service instructions to access trim
• Align trim in the recess and snap or fasten into place; avoid forcing or prying to prevent damage
• If trim clips are broken, replace clips as needed

This light bezel is the trim piece that surrounds and secures the refrigerator/freezer interior lamp, providing a finished appearance and helping keep the lamp in place. It restores a clean fit and prevents light lens movement. What it does:

• Holds the interior lamp assembly or lens in position and covers the lamp opening
• Replaces cracked, broken, or warped trim that lets the lens rattle or sit unevenly
• Helps maintain a sealed appearance around the lamp to reduce light glare and gaps
• Compatible with appliances that use the matching OEM bezel design

• Disconnect power to the appliance before starting any work to avoid shock
• Handle the bezel and lamp lens carefully to avoid cracking; use appropriate tools for retaining clips or screws
• If replacing the lamp or lens, confirm bulb type separately
• Reassemble in reverse order and test the lamp for proper fit and operation after installation

This replacement rack can restores a damaged or missing support cup that helps hold and stabilize a refrigerator rack. It lets shelves sit level so stored items stay secure and the rack moves smoothly. What it does

• Supports a refrigerator shelf or rack pivot so the rack stays level and aligned.
• Replaces cracked, split, or missing support cups that allow racks to tilt or drop.
• Reduces rattling, binding, or uneven sliding caused by a failed rack support.
• Restores proper engagement with rack tracks or pivots for safe storage.

• One rack can (support cup) as pictured.

• Disconnect power (unplug or shut off breaker) before working inside the appliance.
• Remove the affected rack or shelf to access the support cup; installation typically snaps or presses into the rack/frame.
• Inspect mating surfaces for debris or damage; clean before installing the new cup for a secure fit.