Dsxh43gfoww Parts

The Igniter is an OEM part for GE dryers. It is designed to ignite the gas burner to produce heat, which is essential for drying clothes. The igniter ensures that the gas is lit efficiently and safely, enabling the dryer to reach and maintain the proper temperature for effective drying.

You should replace the igniter if it becomes faulty. Causes of a bad igniter can include electrical failures, cracks or breaks in the igniter material, or wear and tear from regular use. These issues can prevent the igniter from generating the necessary heat to ignite the gas.

Symptoms of a bad igniter include:

• The dryer not heating up
• Extended drying times
• The igniter glowing but failing to light the gas burner
•  A lack of flame in gas dryers

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dryer Belt is an OEM part for GE dryers. This belt wraps around the drum, motor pulley, and tension pulley, enabling the drum to spin during the drying cycle. It plays a crucial role in the mechanical operation of the dryer.

Common causes of a bad dryer belt include normal wear and tear from repeated use, overloading the dryer, or damage from obstructions inside the drum.

Symptoms of a bad dryer belt include:

• The drum not turning when the dryer is running
• A burning smell during operation
• Unusual noises such as thumping or squeaking
•  The dryer stopping mid-cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Rear Drum Bearing Kit is an OEM part for GE dryers. The kit includes a rear bearing, shaft support, ball shaft, ball bearing, ball bearing retainer, high-temperature lubricant, and screws required for installation. 

Causes of a bad rear drum bearing can include normal wear and tear over time, exposure to excessive heat, or heavy use that puts strain on the bearing. A failing bearing can cause the drum to become misaligned, creating friction and noise during operation.

Symptoms of a bad rear drum bearing include:

• Squeaking or grinding noises when the dryer is running
• The drum being difficult to turn manually
• Clothes not drying evenly due to improper drum rotation
• The dryer stopping mid-cycle or failing to start

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Timer Knob is an OEM part for GE dryers. This part allows users to set and control the drying cycle by turning the timer mechanism to the desired setting.

Causes of a bad timer knob can include wear and tear from frequent use, physical damage such as cracking or breaking, or the internal mechanism wearing out over time, making it difficult to turn or set the timer accurately.

Symptoms of a bad timer knob include:

• The knob being difficult to turn or slipping
• The dryer not starting or stopping at the correct times
• The timer not advancing through the cycle
• The knob being loose or falling off

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This drum glide provides a smooth, low-friction surface at the front of the dryer drum. Replacing worn glides restores quiet, even drum rotation and helps prevent scraping and fabric damage.

• Supports the front of the drum and allows smooth rotation on the front bearing/bulkhead
• Reduces friction and metal-on-metal contact to minimize noise and wear
• Helps maintain proper drum alignment and spacing at the door opening
• Common symptoms of a worn glide: scraping or squealing while tumbling, drum hard to turn, brown/black marks on clothes, or snagging at the front edge

• Disconnect power; shut off gas supply for gas dryers before servicing
• Remove the top and front panel/bulkhead to access the front drum support
• Support the drum when the front panel is off to avoid stressing the rear bearing
• Many models use multiple glides; inspect all front support wear items (glides/slides and felt seal) and replace as needed for even wear

For complete bearing kit order WE25X10001.

This dryer bearing bracket secures the drum's rear bearing to keep the drum aligned and rotating smoothly. Replacing a worn bracket can help reduce drum wobble, scraping noises, and uneven drum rotation. What it does:

• Supports and locates the rear drum bearing to maintain proper drum alignment.
• Helps prevent the drum from wobbling, rubbing, or scraping against the cabinet.
• Can reduce or eliminate grinding, squealing, or thumping noises caused by a loose or damaged rear support.
• Works with the dryer's rear bearing assembly to enable consistent drum rotation.

• Disconnect electrical power (and gas, if applicable) before beginning any repair.
• Access typically requires removing the dryer drum and rear bulkhead.
• Inspect the bearing, shaft, and surrounding glides; replace any worn components to prevent repeat failure.

This replacement part is a dryer clip, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This dryer clip is typically found on dryers and there are usually multiple clips on one appliance. These clips help hold the front panel in place and secure so that it does not come off during the drying cycle. A new dryer clip might be needed if the front panel of the dryer is off balance or not attached correctly. It is possible that the clips can become loose over time as the appliance is prone to shaking and vibrating. The clips are important as it keeps the dangerous parts covered. If the entire front panel can be lifted off then it is time to replace the dryer clips. These clips are sold individually even though dryers typically have more than one. This clip is a genuine OEM part.

A replacement pan head screw used to fasten appliance panels and components. Its standard #8 coarse thread and 3/8-inch length secure trim, brackets, and small assemblies for stable operation. What it does:

• Fastens panels, brackets, and small parts in household appliances
• Replaces stripped, rusted, or missing #8-18 pan head screws
• Restores secure mounting where vibration or wear caused looseness
• Works with sheet-metal or threaded inserts designed for #8-18 screws

• Disconnect power to the appliance before beginning any repair
• Use the correct #2 Phillips or compatible driver to avoid cam-out
• Thread in straight and tighten until snug; avoid over-tightening to prevent stripping
• Keep small screws away from children and dispose of old fasteners safely

This is a dryer timer. The part is used to control the dryer's cycles. If this part is damaged or faulty, the dryer may skip cycles, fail to complete them, or get stuck in a particular cycle.Although the dryer timer tends to be durable, there's a chance that it could wear out over time. It could also become damaged from misuse. Before beginning the repair, unplug the dryer.The dryer time will work with models from GE. This is a genuine OEM replacement part. It was sourced from the manufacturer, and it is sold individually.

This adjustable leveling leg replaces a worn or damaged refrigerator foot to restore stable, level support and smooth door operation. Simple height adjustment helps eliminate rocking and keeps the appliance sitting evenly on uneven floors. What it does:

• Supports the appliance weight and lets you fine-tune height for proper leveling
• Compensates for uneven floors to reduce rocking and wobble
• Helps doors seal and align correctly by allowing height adjustment
• Reduces vibration-related noise when the cabinet sits evenly

• One adjustable leveling leg

• Use gloves and eye protection; unplug the appliance and remove food or shelves near the work area before starting
• Tilt or raise the appliance slightly as recommended by the manufacturer to access the leveling leg; support the cabinet securely
• Turn the leg to raise or lower the appliance; check level and door operation, then recheck after the appliance settles
• If the leg threads or mounting hardware are damaged, replace all affected components before returning the appliance to service