Dts181cswrww Parts

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

8-18 CA HX 1/2 S

This genuine fastener secures appliance components such as panels and brackets. Replacing a missing or stripped screw restores proper fit and helps reduce vibration or rattling. Features 12-24 threads and an approximate 0.785-inch length. What it does:

• Fastens panels, brackets, covers, and other hardware points in the appliance
• Helps maintain proper alignment and a tight fit of components
• Replaces damaged, stripped, or missing hardware
• Common symptoms include loose or rattling parts and hardware that won't tighten

• One screw

• Disconnect power before servicing; shut off water supply if working near water components
• Start the screw by hand to avoid cross-threading; replace one-for-one in the original location
• Use the correct driver bit for the head style; tighten snugly without overtightening into plastic or thin metal

This left-hand shelf front end cap secures the shelf's front trim/rail. Replacing a cracked or missing cap restores a snug, finished fit so the front edge stays aligned and items remain contained.

• Anchors the front rail/trim to the shelf frame
• Helps maintain alignment and support at the shelf's front edge
• Common symptoms: broken or missing cap, loose/wobbly front rail, sagging or misaligned front edge

What's included: 1 left-hand shelf front cap

• Unplug the appliance or turn off power before servicing
• Remove and empty the shelf for easier access; handle glass carefully
• Identify left-hand orientation while facing the unit; align tabs and snap/slide cap into place
• Avoid forcing brittle plastic; do not overtighten any fasteners

A replacement reversible plug door that covers and protects the appliance power inlet while letting the cord exit left or right for tidy cord routing. Restores a clean back panel appearance and helps keep the power connection protected from debris. What it does:

• Covers the power inlet opening to protect the plug and inlet from dust and debris.
• Reversible design lets you route the power cord to either side to fit against the wall.
• Helps keep the cord tucked close to the appliance so the unit can sit flush with cabinetry or walls.
• Replace when the door is cracked, broken, missing, or no longer holds the plug securely.

• Always unplug the appliance before starting any repair or inspection.
• May require access to the rear panel; check your owner's manual for disassembly steps.
• Check orientation before finalizing installation to ensure correct left/right cord routing.

Secures refrigerator wiring to prevent chafing and vibration noise. Replace when damaged or missing to keep harnesses organized. Confirm fit by model.

Secures water tubing or wiring to your refrigerator cabinet. Replace if missing or damaged to prevent vibration, rubbing, or leaks. Confirm fit.

Restores the finished front edge of your refrigerator glass shelf. Replaces cracked, chipped, or missing trim to keep items secure and the shelf stable.

This replacement defrost heater warms the freezer's evaporator area during the automatic defrost cycle. It melts accumulated frost so air can circulate, helping maintain stable temperatures and preventing ice buildup on the back wall.

• Heats the evaporator to clear frost and ice during defrost
• Helps keep airflow passages and the defrost drain path open
• Common symptoms of a failed heater: heavy frost on the back panel/coils, poor cooling or warm sections, fan noise from ice contact, cooling returns temporarily after a manual defrost
• Typically located behind the rear freezer panel

• Disconnect power before servicing; wear cut-resistant gloves
• Access the evaporator by removing the freezer's rear panel; thaw heavy ice before removal
• Transfer any clips/brackets and route wires exactly as original, keeping them away from plastic parts
• After installation, ensure wiring connections are secure and the heater is not contacting plastic surfaces

This rear glass shelf trim replaces the finished glass edge at the back of a refrigerator shelf, restoring a secure seat and clean appearance. It helps keep items from sliding off and reduces gaps where spills can drip. What it does:

• Provides the finished rear edge and support for a refrigerator glass shelf.
• Helps the shelf seat and lock into position; a broken or missing trim can prevent proper seating.
• Reduces food/items from shifting toward the cabinet rear and helps contain minor spills.
• Restores appearance when the original trim is cracked, chipped, or worn.

• Handle the glass trim carefully; wear cut-resistant gloves and eye protection during installation.
• Remove the shelf per the appliance's OEM instructions before replacing the trim, then refit the shelf and verify it seats properly.
• Inspect mounting clips or supports and replace if damaged to ensure a secure fit.

Left-hand front cap secures trim rail on refrigerator shelf. Replace cracked, broken, or missing cap to restore secure fit for front edge trim piece.

Size: 8-32 t. Includes 12 screws.

Replacement mounting screw for securing panels, trim, and internal components in appliances. Needed when original screws are stripped, lost, or damaged.

Fix a refrigerator that won't cool or runs constantly with this compressor kit. Essential for restoring proper cooling in refrigerators and freezers.

Replacement mounting screw for securing panels, trim, and internal brackets. Needed when original fasteners are missing, stripped, or damaged.