Du850swps3 Whirlpool Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 3400959
$14.36
- Compare At:
-
$17.09
- You Save:
-
$2.73
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 4378867
Optional accessory. Color: White.
More
$158.70
- Compare At:
-
$188.85
- You Save:
-
$30.15
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 8573183
$203.64
- Compare At:
-
$215.00
- You Save:
-
$11.36
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: W10082653
$220.27
- Compare At:
-
$262.12
- You Save:
-
$41.85
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3374720
$25.64
- Compare At:
-
$28.20
- You Save:
-
$2.56
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3369031
This drain cover seal creates a watertight gasket between the washer's drain cover and housing to help stop leaks and keep lint and debris out of the drain pump area, restoring reliable drainage and reducing mess. What it does:
- Seals the drain cover to prevent water from leaking at the base of the tub or access area.
- Helps block lint, coins and small debris from entering the drain pump housing.
- Restores proper drainage by maintaining a secure, even seal around the drain opening.
- Can reduce recurring puddles or water on the floor near the washer's front/bottom.
What's included: One drain cover seal. Install notes:
- Disconnect power and turn off water supply before starting work.
- Remove the drain cover/access panel per your model's instructions and clean mating surfaces before installing the new seal.
- Press or seat the seal evenly into the cover/housing; confirm correct orientation and full contact around the perimeter.
- After reassembly, restore power/water and run a short test cycle to check for leaks.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 4318273
The Latch Switch Kit, an OEM Replacement Part is designed to ensure the safe operation of your Whirlpool dishwasher. The kit includes two microswitches and a wiring harness. It prevents the appliance from running when the door is open. If defective, the door switch may prevent the dishwasher from operating even when the door is closed.
Causes of a bad door switch can include wear and tear, exposure to moisture, or a broken actuator.
Symptoms of a bad door switch include:
- Dishwasher not starting
- Dishwasher stopping mid-cycle
- Error codes related to door issues
- Dishwasher running with the door open
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The door latch would not catch as a result i was unable to use my dishwasher Joel C. • Shreveport , LA • January 09, 2016
I ordered the Door Switch Kit, along with a few other items. However, the switch kit was all that was needed. Isimply followed the instructions that came with the kit. It was necessary to cut the wires which connected to the wire assembly in the door of the dishwasher. I then connected the pieces from the switch kit and then connected the end pieces to the door. I closed the door, and started up the dishwasher. It worked as well as before.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10102498
Do-It-Yourself Stories from Customers like You
Replaced float and float switch Roland B. • Smithtown , NY • May 21, 2016
Very easy to repair. All the parts fit perfect. Entire repair took 20 mins.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10131216
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10247394
Do-It-Yourself Stories from Customers like You
Making real bad noise Michael P. • Reynoldsburg , OH • November 01, 2014
Replaced the pump/motor assy.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8520839
Do-It-Yourself Stories from Customers like You
Water backing up into dishwasher from sink bad check valve Russell B. • Hattiesburg , MS • January 18, 2015
Installed new Collector W/check Valve on the bottom of the dishwasher tub. About a 30 minute job (including removing the dishwasher from the cabinets--water supply, drain, and power--and reinstalling it. It would be nice if the manufacturer supplied the rubber check valve separately--small piece of rubber about the size of a nickel, probably $1 to $2--instead of selling it only as part of a $38 assembly.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3368955
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3379920
Genuine Whirlpool part
By: Whirlpool
Part Number: 3369038
Do-It-Yourself Stories from Customers like You
Broken part Dawn W. • Halfway , OR • May 23, 2015
Installed new washer took 5 minutes
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 3371569
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3369457
Color: Black. For almond use WP3369457. For biscuit use 3375062. White is no longer available.
Do-It-Yourself Stories from Customers like You
The problems i had with my dishwasher were that there was a moldy oder coming from the washer and sink and secondly the door of the washer wasn't closing properly due to a bad latch Melissa A. • Wittmann , AZ • September 18, 2015
I watched a very helpful and thorough video that your website provided. It truly was easy except loosening a couple of screws. The diagrams that the site provided were also very helpful in figuring what needed to be ordered. Thanks for your services...from a very satisfied customer!
Read more
More