We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This sensor monitors the water temperature inside your dishwasher during wash cycles. It sends temperature readings to the control board to ensure proper cleaning and sanitizing. Replace it if your dishes aren't getting clean, water stays cold, or you see error codes related to temperature.
The model number on the dishwasher did not have a -0000 or -0001 on the end of the model number so I bought the part for both models. I assume if yours doesn't have it, then it is the -0000 model like mine, which of course means the more expensive part. You can always buy both and return the one you don't need. Replacing the temperature sensor was fairly simple - disconnect power and water, pull the right-side panel off, move the noise filter out of the way, turn the sensor a quarter turn... Read more
Most orders arrive by Wednesday, November 25
Inlet drain hose connects your dishwasher pump to drainage system. Replace if cracked, leaking, or damaged to restore proper water drainage function.
Replaced bad hoses and clamps Read more
Upper spray arm nozzle assembly for dishwashers. Attaches to the bottom of the upper rack. Replace if seal is worn, nozzle falls off, or assembly is cracked.
The Dishwasher Heater Assembly ensures your dishwasher operates efficiently by providing consistent and reliable heating during each cycle. As a genuine OEM part, it guarantees perfect compatibility with a range of Samsung dishwasher models, allowing for seamless installation and optimal performance. This high-quality heater assembly enhances the drying process, ensuring your dishes come out spotless and dry every time. Designed for durability, the Dishwasher Heater Assembly helps extend the lifespan of your appliance by maintaining effective temperature control. Whether replacing a faulty heater or upgrading your dishwasher's functionality, this genuine OEM part offers the dependable performance you expect from your Samsung appliance. Enjoy improved efficiency and consistent results with the Dishwasher Heater Assembly , crafted to meet the highest standards for your kitchen needs.
Uninstalled dishwasher, took it apart and replaced the heating element. Not too difficult, but time consuming because replacing the part requires a lot of disassembly. Read more
Dishes not getting clean? A faulty mid spray arm nozzle prevents proper water distribution. This assembly restores spray coverage for cleaner dishes.
Secures your dishwasher to countertop or side cabinets. Replaces bent, broken, or missing brackets. Hooks onto dishwasher top, screws into counter.
Bracket has side mount on dishwasher and then screwed into cabinets on both sides. Read more
Replaces broken, snapped, or worn dishwasher leveling legs. Installs at the base to stabilize and level your unit. Adjust height with pliers.
I removed the dishwasher, put it on its side, used a needle nose plier to remove the snapped piece of leg and screwed the new one in. Read more
Prevents leaks around the distributor shaft in your dishwasher's sump assembly. Replace if you see water pooling or error codes. Confirm fit by model.
Based on the apparent relation to draining that I found on the internet I decided to open/unscrew the areas under the bottom rack where the water is pumped out. One obvious issue I observed was the drain check valve was turned and not functioning. It appeared to be swollen and stretched. When the new "Vane-Check" valve arrived it was not swollen and fit perfectly. I assume heat swells it up over time. I replaced three other seals while I had it apart. The one under the chopping blade was... Read more
Dishes not getting clean? This water distribution duct nozzle directs water to upper spray arms. Connects pump assembly to spray levels for thorough cleaning.
Guides dishwasher door alignment during opening and closing. Replace if cracked, broken, or causing door misalignment or sagging. Installs on hinge.
Purchased a HEAVILY discounted damaged dishwasher from a big box appliance store. I looked up and purchased the part needed for door hinge damaged when shipped. I knew the price of part and delivery timing before I purchased the appliance. Brought home the dishwasher and the part arrived 2 days later just as promised and the correct part. Installed the hinge bushing and installed dishwasher. Works perfectly. The easy way to ID and order parts allowed me to save more than 2/3 of the price of the... Read more
This is a protective cover that fits over the brake assembly inside the dishwasher. It shields the brake mechanism from water and debris, helping ensure the spray arm and wash motor components operate properly. Replace this cover if it is cracked, broken, or missing, which can lead to unusual noises or impaired wash performance.
After researching the Internet, I thought the drainage hoses were my problem. First I changed both drainage hoses. That didn’t solve the problem. I had to look for another area that was causing water to drip into the pan. I found water leaking from behind the brake assembly. Since I didn’t get an oE error code, I eliminated the brake assembly as causing my problem. I ordered a brake gasket and cover. Once I got it properly installed, problem solved! Read more
Replacement stopper rail that keeps dishwasher racks stable and prevents sliding. Installs on rack assembly. Needed when original is cracked or missing.
Replaced missing parts Read more
Spacer cap that maintains proper alignment between dishwasher tub components. Replace if cracked, broken, or missing to restore correct spacing.
Fix a dishwasher door that won't close or latch properly with this door lock holder. Easy DIY repair—pull out dishwasher 3 inches to replace.
I pulled dishwasher out just 3 inches and was able to replace broken part. Read more
Seals the dishwasher drying fan to prevent water leaks and noise. Replace if you notice leaking, reduced drying, or unusual sounds during cycles.
Deduced that the sound was coming from the blower in the front door. Removed old fan and found that the blades had warped and were hitting the housing. Replaced the blower assembly and all is good. For now. Read more
If your dishwasher isn't cleaning dishes properly or the spray arm is loose, this nozzle holder secures the spray arm for proper water distribution.