Er36dsch/Ng Parts

This temperature sensor monitors the appliance's internal temperature and relays accurate readings to the control, helping maintain the set temperature. Replacing a failed sensor can resolve temperature-related errors and restore consistent, reliable heating performance.

• Senses cavity temperature and sends a signal to the control to regulate heat output
• Helps maintain target temperature during cooking cycles
• Common failure symptoms: inaccurate temperatures, won't reach or overshoots set temp, intermittent heating, or temperature-related error codes
• Can cause long heat-up times or premature shutdown when failing

• Disconnect power at the breaker/fuse and allow the unit to cool completely
• Access location varies by model; the sensor is typically mounted to the cavity wall or accessible from the rear panel
• Remove mounting screw(s), unplug the connector, and install the new sensor; transfer any bracket/seal if present
• Route leads clear of hot or moving parts and do not overtighten the mounting screw

This LED socket assembly restores the high-intensity indicator lighting used on select cooktops to show an active cooking zone. Replace a failed module to bring back clear, consistent illumination. What it does:

• Provides bright LED illumination for a cooking zone indicator
• Restores visual feedback that a burner/zone is in use
• Replaces a failed or damaged LED socket/module
• Common symptoms: no light, dim or flickering light, intermittent operation, or physical damage

• One LED socket assembly

• Disconnect power at the breaker before servicing
• Allow the appliance to cool and protect the glass surface while working
• Access the module from beneath the cooktop; match connector orientation and mounting position
• Test illumination before final reassembly

This O-ring seals the igniter assembly to prevent gas or air leaks and help ensure reliable ignition performance. It's a small replacement seal used when the original is worn, cracked, or missing. What it does:

• Creates a tight seal around the igniter assembly to reduce leaks
• Helps maintain proper ignition performance by keeping components sealed
• Commonly replaced if brittle, cracked, flattened, or after igniter service
• Small, inexpensive part that protects nearby components from gas or moisture exposure

• One O-ring (igniter) as pictured

• Turn off gas and power to the appliance before servicing
• Replace only with the exact O-ring size for your igniter to ensure a proper seal
• Inspect surrounding gaskets and components and replace if damaged

This is a bake igniter assembly used to light the oven's gas burner so the oven can reach and maintain set temperatures. It replaces a worn or failed igniter to restore reliable baking and roasting performance. What it does:

• Provides the heat source to ignite the oven's bake burner so the oven can heat properly
• Allows the oven to reach set temperatures; a weak or failed igniter can cause slow heating or no heat
• Helps establish a consistent flame for stable oven operation
• Works as the replacement assembly for the oven's bake ignition system

• Disconnect power and gas supply before attempting service
• Handle the igniter carefully; the element is fragile and can be damaged by rough handling
• Use proper tools and follow the oven manufacturer's service instructions for safe installation

The Riding Mower Halogen Light Transformer is essential for maintaining the lighting system of your rear-engine riding mower. This genuine OEM part ensures your mower's halogen lights receive consistent and reliable power, providing bright illumination for safer operation during early mornings or late evenings. Designed specifically for compatibility with a variety of rear-engine riding mower models, this transformer guarantees a secure fit and straightforward installation process. Using the Riding Mower Halogen Light Transformer means you can easily replace a faulty or damaged transformer, restoring the full functionality of your mowerGÇÖs lighting system. This not only enhances visibility but also contributes to the overall safety and efficiency of your mowing tasks. By choosing this genuine OEM part, you ensure the highest quality and durability, reflecting SamsungGÇÖs commitment to reliable performance. Keep your riding mower in top condition and enjoy a better mowing experience with this dependable halogen light transformer.

This inner burner cap for an 18K burner sits over the burner head to shape the flame and shield the ports. Replacing a worn or missing cap restores stable flames, reliable ignition, and consistent cooking performance. What it does

• Positions over the 18K burner head to concentrate and stabilize the flame
• Helps protect burner ports from spills and debris
• Proper seating supports quick, consistent ignition
• Common symptoms of a bad or misaligned cap include uneven or yellow flames, poor simmering, or continuous clicking without ignition

• One inner burner cap

• Turn off gas and power; allow the cooktop to cool completely
• Remove the old cap; clean and dry the burner head and ports
• Set the new inner cap flat and centered on the burner; do not force
• Test ignition and adjust cap position if the flame is uneven or noisy

This outer surface burner ring replaces the damaged or worn ring on a gas cooktop, restoring proper gas flow and burner alignment for safer, more even heating. Fits specified Samsung surface burners. What it does:

• Replaces a cracked, warped or corroded outer burner ring to re-establish correct burner geometry
• Helps restore consistent flame pattern and even cooking across the burner
• Can resolve issues like uneven heating or gas flame wandering at the burner edge
• Works with the matching inner burner and cap to form the complete burner assembly

• One outer surface burner ring

• Turn off gas supply and disconnect power to the appliance before servicing
• Allow all components to cool completely; burner parts may have sharp edges—wear gloves
• Remove burner cap and inner components, seat the new outer ring fully before reassembly

This service door hinge kit replaces a worn or damaged refrigerator/freezer door hinge to restore smooth door operation and proper alignment. It helps stop sagging, rubbing, or noisy movement so the door seals correctly. What it does:

• Replaces the door hinge assembly that supports and guides the door pivot
• Restores proper door alignment to improve sealing and cooling performance
• Stops sagging, binding, or noisy door movement caused by a worn hinge
• Helps maintain consistent door operation after repeated use

• Disconnect power to the appliance before starting any repair
• Support the door during removal and installation to avoid injury or damage
• Tighten fasteners securely but avoid over-torquing to prevent stripping

This service door window pack replaces a damaged or worn microwave/oven door window to restore visibility and proper sealing. It provides the visible glass assembly used in the appliance door for safe operation and viewing. What it does:

• Replaces cracked, scratched, foggy or broken door window glass
• Restores clear viewing of the cooking cavity for monitoring food
• Helps maintain the door seal and proper operation when installed correctly
• Prevents potential heat/light leakage caused by damaged window components

• One door window service pack

• Disconnect power before beginning any door repairs to avoid shock or injury
• Handle glass components with care and wear cut-resistant gloves
• Ensure all retained clips/gaskets are reinstalled and the window is seated per OEM alignment

This service burner gasket seals the burner assembly to the cooktop, restoring a proper seal to help stabilize flames and improve ignition reliability. Use it to replace worn or damaged gaskets on compatible Samsung gas cooktops. What it does:

• Seals the burner-to-cooktop gap to help prevent gas leaks and keep burner components aligned.
• Helps maintain consistent flame shape and heat for more even cooking.
• Can reduce symptoms like sputtering or uneven flames, difficulty igniting, or visible gaps around the burner.
• Fits the specified burner assembly and restores intended burner performance when the existing gasket is cracked, torn, or compressed.

• Turn off the appliance and shut off the gas supply before attempting any service.
• Remove the burner cap and head per the appliance's service instructions; seat the gasket fully around the burner base.
• Inspect surrounding components (burner head, screws, mounting surface) and replace any damaged parts.

This wafer-head Phillips screw (#8 x 3/8 in) is a factory fastener used to secure panels, brackets, and covers in compatible appliances. Replace a missing or damaged screw to restore a tight, properly aligned fit. What it does:

• Secures sheet-metal or plastic components to the appliance chassis or subassemblies
• Helps maintain proper alignment and reduce vibration or rattling
• Replaces lost, stripped, or corroded screws of the same size and type
• Used at panel, bracket, and cover mounting points designed for this fastener

• One wafer-head Phillips screw (#8 x 3/8 in)

• Disconnect power (and gas, if applicable) before servicing
• Start threads by hand to avoid cross-threading; use a #2 Phillips driver
• Do not overtighten, especially into plastic or thin sheet metal
• Replace only with the same size/type fastener removed to ensure proper fit

This illuminated service knob replaces a worn or damaged control knob to restore a visible, easy-to-use control point on your appliance. It provides the same look and basic control function as the original part. What it does:

• Replaces a damaged or faded control knob so settings can be selected and seen clearly
• Illuminated design improves visibility in low light and matches factory appearance
• Fits the original control shaft and detents for reliable selection feel
• Helps address symptoms like loose, cracked, non-illuminating, or cosmetically worn knobs

• 1 illuminated service knob

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Pull the old knob straight off the control shaft; push the replacement knob onto the shaft until it seats
• If illumination does not work after replacement, verify lamp/LED and wiring with the model-specific service instructions

A single aluminum low-pressure service valve that provides a sealed access point for refrigerant charging, evacuation and pressure checks. Designed to restore proper serviceability for refrigeration and sealed-system maintenance. What it does:

• Provides a dedicated, sealed port for connecting gauges and service equipment to the low-pressure side of the refrigeration system.
• Allows safe charging, evacuation and pressure testing during diagnostics and repairs.
• Helps isolate and reseal the system after service to prevent refrigerant leaks.
• Commonly used when a refrigerator or freezer needs refrigerant service or pressure verification.

• Intended for experienced technicians; refrigerant work should follow all local regulations and EPA/other certification requirements.
• Depressurize and recover refrigerant before removing or replacing the valve.
• Inspect and replace any sealing O-rings, fittings or gaskets as needed; torque to OEM specifications.
• Test for leaks and proper operation before returning the appliance to service.

This single aluminum service valve is a sealed-system access valve used on compatible refrigeration systems to allow safe service, pressure checks and refrigerant charging. It provides a reliable access point without replacing major components. What it does

• Provides a sealed access point for refrigerant charging, pressure testing and diagnostic service
• Helps isolate the refrigerant line during repairs or evacuation
• Reduces the need to disturb larger sealed-system components when performing service
• Commonly used when addressing pressure/charge-related symptoms or performing routine diagnostics

• One single aluminum service valve

• Follow all refrigerant-handling regulations and use proper recovery equipment
• Depressurize the system and verify zero pressure before removing or installing the valve
• Inspect fittings and gaskets for damage and replace as needed to ensure a proper seal

This retaining ring secures the LED assembly in place, keeping indicator lights and display components stable for reliable operation. It's a small but important part that helps prevent loose or misaligned LED modules. What it does:

• Holds the LED assembly securely to the control/display area
• Prevents movement or rattling of indicator lights during operation
• Helps maintain proper alignment so LEDs remain visible and functional
• Can address symptoms like loose display trim, vibrating noises, or intermittently obscured LEDs

• Disconnect power before starting any repair to avoid shock or damage
• Handle the LED assembly and connectors gently to avoid breaking LEDs or wiring
• Use basic hand tools; avoid forcing the ring—align and snap into place per OEM guidance