Feb245asb Parts

This control-panel switch restores reliable on/off control of a selected function on your range or wall oven. Replacing a worn or intermittent switch helps ensure the appliance responds consistently when you toggle that function.

• Directs power to the associated circuit when switched on or off
• Common symptoms: function won't turn on/off, intermittent operation, or the switch feels loose/sticks
• Helps restore positive, consistent control from the backguard/control panel

• Disconnect power at the breaker before servicing
• Access the switch from the control panel/backguard; retain screws/clips
• Label/photograph wire positions and transfer leads one at a time to the new switch
• Ensure firm terminal connections, reassemble, restore power, and test operation

Electronic clock/timer control that mounts behind the control panel. It provides the time display and manages oven functions so you can set temperatures, modes, and the kitchen timer reliably from the keypad.

• Provides clock and kitchen timer display; accepts keypad inputs for bake, broil, and temperature settings
• Controls oven heating functions by commanding the appliance per selected mode and setpoint
• Common failure signs: blank or dim display, unresponsive buttons, error codes or repeated beeping
• Also result in the oven not starting or not heating even though the appliance has power

• Disconnect power at the breaker before servicing; this control carries line voltage
• Access is typically through the control panel area; photograph wire connections to aid reassembly
• Handle the board carefully and avoid static discharge; transfer any brackets or supports from the original
• After installation, restore power, set the clock, and verify all oven functions

Replacement motor that restores mechanical drive or airflow in select Frigidaire appliances. Installs in place of the original motor to help return normal rotation, tumbling or fan operation. What it does:

• Drives rotating components (drum, tumbler, agitator or fan) depending on application.
• Helps restore normal spin, tumble or airflow when the original motor fails.
• Common symptoms: appliance won't start or spin, weak/uneven rotation, loud humming/grinding, or reduced airflow.
• Direct-fit replacement designed to match original mounting and electrical connections for specified models.

• Disconnect power (and water if applicable) before beginning any work.
• Avoid pulling on wires; reconnect all harnesses and secure mounting fasteners per OEM instructions.

Restore reliable timekeeping and timed-cycle control with this Clock/Timer Kit. It replaces a failed clock/timer so you can set the time, run countdowns, and receive alerts as designed by the manufacturer. What it does

• Displays and keeps the appliance's current time
• Controls kitchen timer/countdown functions and audible alerts
• Interfaces with the appliance to manage timed cycles (start/stop)
• Helps resolve issues like blank or dim display, timer not advancing, drifting time, or unresponsive keys/knob

• 1 clock/timer kit assembly

• Disconnect power at the breaker before servicing; verify no voltage is present
• Access the control area; note screw locations and panel orientation
• Label or photograph wire locations; transfer connections one at a time to the new unit
• Mount securely, reassemble, restore power, and set the clock before testing timer functions

This genuine OEM part is a clock timer for ovens. The clock timer is the part of the oven that allows the user to set a time for cooking and baking. If the timer buttons are no longer responding to touch or the timer's digital display is no longer visible, it will need to be replaced. Luckily, replacing a timer is a fairly simple repair.To get started, make sure the range is unplugged. Once unplugged, pull the range out and away from the wall to gain access to the upper back panel. Remove the mounting screws to the panel to gain access to the back of the control panel. Locate the timer and proceed to unthread the screws that hold it in place. Once loosened, pull the timer out of its place and install the new timer by threading the mounting screws that secure it to the control panel. Reinstall the upper back panel and restore power to the appliance.This replacement part is sold individually and is compatible with Frigidaire, Electrolux, Gibson, Kelvinator, and Westinghouse brand ovens.

This small replacement spacer positions and secures appliance components to maintain correct alignment and fit. Installing the spacer restores proper panel spacing and reduces vibration where a worn or missing spacer causes looseness or rubbing. What it does:

• Maintains the correct gap between panels, trim, or assemblies to ensure parts fit flush
• Keeps components aligned to prevent rubbing, binding, or uneven wear
• Helps reduce vibration and rattling caused by a missing or damaged spacer
• Preserves original part spacing for reliable operation of the surrounding components

• Disconnect power to the appliance before any service to avoid shock or injury
• Remove any trim or fasteners that block access; keep track of screws and small parts
• Match the new spacer's orientation to the original; do not force parts into place

This clock timer is the oven's electronic control. It powers and times the bake/broil circuits and provides the display and keypad interface. Replacing a failed control can restore reliable oven operation, programming, and accurate clock/timer functions.

• Controls bake and broil relays based on user settings and oven sensor feedback
• Displays time, temperature, and status; accepts keypad commands
• Manages timed functions such as kitchen timer and delay start
• Common symptoms: blank or erratic display, unresponsive buttons, oven won't heat/start, frequent beeping or error codes

• Disconnect power at the breaker before servicing to prevent electrical shock
• Handle the board carefully and avoid static discharge; do not touch components or contacts
• Label or photograph wire connections; transfer connectors one at a time to the new control
• After installation, set the clock and test all oven functions; perform calibration if your model supports it

This mechanical timer replaces a failed or unresponsive oven/range timer to restore manual timing and cycle control. It provides a straightforward replacement for units that no longer count down or trigger timed operations. What it does:

• Advances and displays the set time so timed cooking cycles can run and finish as expected
• Starts or stops oven/range operations tied to the mechanical timer mechanism
• Replaces a timer that won't count down, won't stay set, or has a stuck/loose control shaft
• Restores manual countdown/alert functions used for timed cooking

• Disconnect power to the appliance before beginning any repair
• Label and photograph wire locations before removing leads; reinstall wires to the same terminals
• Align the timer shaft and mounting tabs carefully; do not force the shaft or overtighten fasteners

Color: chrome. Measures about 18 inches wide by 15 inches deep.

This appliance screw fastens panels, brackets, and other components inside the unit. Replace a missing, rusty, or stripped fastener to restore a secure fit and help prevent rattles, misalignment, or premature wear.

• Secures appliance components such as panels, brackets, and covers
• Restores proper fit when an original screw is missing or stripped
• Helps reduce vibration and noise from loose parts
• Common signs: loose or misaligned parts, rattling, or a missing screw

• Disconnect power before servicing
• Match the new screw to the original for size and thread before installing
• Hand-start threads to avoid cross-threading; do not overtighten
• Reuse any original washers or clips if they were used with the old screw

This handle assembly replaces a broken, cracked, or missing refrigerator door handle so the door opens and closes securely and looks finished. Durable molded construction matches the original fit and lever action. What it does:

• Provides the gripping surface and mounting points to open and close the refrigerator door
• Restores proper door control when the original handle is cracked, loose, or detached
• Keeps the door aligned with its latch area for smooth operation
• Prevents hand contact with damaged edges and improves cabinet appearance

• Unplug the appliance or switch off power before beginning work to avoid injury
• Remove any trim or screws holding the old handle; keep fasteners if they are undamaged and listed for reuse
• Align the new handle with the mounting bosses and fasten securely without over-tightening to avoid cracking the plastic
• If the handle uses hidden clips or adhesive trim, verify clip engagement and door operation before finishing

This is a #8 screw, 0.500 inch long, used to secure panels and components in appliances. It provides a correct-fit fastener for repairs where the original #8 x 1/2" screw was required, restoring proper assembly and stability. What it does:

• Fastens trim, panels, brackets and small components where a #8 x 1/2" screw is specified
• Holds parts securely to prevent rattling, gaps or loose panels
• Replaces worn, stripped or missing screws to restore proper fit
• Appropriate for common interior and exterior appliance mounting points

• Use the correct screwdriver (typically Phillips) and avoid over-tightening to prevent strip or damage
• Disconnect power and follow appliance manufacturer safety instructions when accessing internal parts

This hex flange nut secures components where a broader bearing surface is needed to resist loosening and distribute load. It fits 10-32 threaded studs and is used on fastened assemblies in appliances. What it does:

• Provides a secure threaded connection for 10-32 screws and studs
• Flange spreads clamping force to reduce panel or bracket damage
• Hex shape allows tightening with a wrench for a reliable hold
• Commonly replaces worn or missing nuts that cause loose panels or rattling

• One hex flange nut

• Use the correct 10-32 screw or stud and hand-start threads to avoid cross-threading
• Tighten with an appropriately sized wrench; do not overtighten to prevent thread or part damage
• Disconnect power and follow appliance safety instructions before servicing
• Replace only like-for-like; confirm size and thread match your application

This oven light button is the user-facing push button used to operate the oven light. It restores a damaged or missing control button so the light can be turned on and off easily. What it does:

• Acts as the push button for the oven light control assembly.
• Replaces cracked, worn, or missing oven light buttons that are hard to press or no longer stay in place.
• Helps restore normal user control of the oven interior light without replacing the entire switch assembly.
• Fits into the existing control panel opening and interfaces with the factory light switch mechanism.

• Turn off power to the appliance before attempting any repair to avoid shock—unplug or switch off the breaker.
• Remove control panel trim or bezel as required to access the button; retain all fasteners for reassembly.
• Inspect the underlying switch and wiring; replace the switch if the button does not resolve the issue.

Specs: 8 - 18 x 0.500