Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Freezer Shelf is an OEM part for Frigidaire refrigerators, specifically designed for the freezer section. It is a wire shelf that measures approximately 27-7/8” by 17-1/4” deep.
Causes of a faulty freezer shelf can include wear and tear over time, damage due to heavy loads or mishandling, or broken or bent support brackets. These factors can result in a sagging or unstable shelf, reduced storage space, or difficulty in placing items on the shelf.
Symptoms of a bad freezer shelf may include:
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
I needed extra freezer shelves for my Frigidaire freezer. I liked that I could check if part was compatible with my model. Also that I could check measurements with the grid in the picture. This was great because I would have ordered wrong shelf otherwise. Thank you for adding this feature!! Read more
Replace the lock assembly: Open the lid and remove four philips screws from underneath the gasket. Carefully and patiently remove all of the gasket clips, first from the left and right sides then remove all but two from the top so when the final one comes out the panel and gasket can come towards you and then set gently in the top of the freezer. Remove the wires from the bulb in the center so they won't be in the way. Remove the large fiberglass rectangle and set it on top of the panel. Use a... Read more
Put nameplate on Read more
The square shaft was broken off in the recessed hole of the freezer door lock and would not allow the key to engage it to turn and lock the freezer door. R and R of door lock assy was necessary but not easy-it was accessed through a 1/2" X 1.5" slot in the inner ledge of the door that the hook from the lock protruded through to lock the door. I removed the lock retaining clip through the slot, slid the lock assy out, replaced it with the new assy and replaced the clip. All with curved... Read more
This is an outer door panel that is used with refrigerators. The outer panel is the part of the freezer that users have contact with when using the appliance. It works in tandem with an inner door panel to keep the freezer cold. The outer door panel also offers protection from impact associated with the freezer. It's made of durable materials but can experience wear and tear or damage and require replacement.When replacing the outer door panel of the freezer, make sure the appliance is unplugged. Remove the trim and the magnetic caps on the hinge side of the freezer. Keeping the door closed, push on the panel from the hinge side to disengage it from the brackets. The panel will come off and can be placed to the side. The new outer door panel can be placed in the same location before reassembling the door. Plug the freezer back in before use.This is a genuine OEM replacement component that has been directly sourced from the manufacturer. The outer door panel is sold on an individual basis. The part is made to be used with freezers by Crosley, Frigidaire, and Kenmore.