Ffld2426tw2a Parts

This is a small spring that attaches to the lid of a laundry center washer, providing tension to hold the lid in position. It helps the lid stay open during loading and close securely during operation. Replace this spring if your washer lid won't stay open, slams shut on its own, or the original spring is broken or stretched out.

Surface burner grate supports cookware on your gas cooktop. Replace if cracked, warped, or broken to restore stable pan support above the flame.

Secures the door strike to your washer, keeping the latch aligned for firm closure. Replace if missing, stripped, or corroded to restore reliable latching.

The Dispenser is an OEM replacement part for Frigidaire washing machines. Located on the interior door, the dispenser accurately releases detergent, softener, and other treatments through a series of internal chambers and slots directly into the wash drum.

Causes of failure include clogging of internal dispenser parts from built-up detergent, damaged outlets preventing proper release into the drum, worn gears interfering with controlled dispensing timing, or electronic control issues disrupting the sequenced release.  

Symptoms of a bad dispenser include:

• Products not fully dispensing or spraying inside the wash drum as intended
• Residue buildup inside dispenser compartments  
• Loose, sagging, or missing internal dispenser components
• Premature dispensing during water fill instead of correct cycle times

This OEM Frigidaire component is compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This is an off-balance switch that detects when the wash load becomes unevenly distributed during the spin cycle. It signals the control board to pause or adjust the cycle to prevent excessive vibration and potential damage to the machine. Replace this switch if the washer fails to detect unbalanced loads, vibrates excessively during spin, or stops mid-cycle with an error code related to load balance.

This pressure switch monitors the water level inside the washer tub by sensing air pressure in a connected hose. It signals the control board to stop filling when the correct water level is reached. Replace this switch if the washer overfills, underfills, does not fill at all, or displays water-level error codes.

Pressure tube connects washer tub to water level switch. Replace if cracked, kinked, or clogged to restore proper water level sensing in your laundry center.

This trim is a decorative finish piece for select ranges and wall ovens. It covers gaps and raw edges for a clean look and helps keep adjacent panels properly seated when the original becomes cracked, bent, or missing.

• Provides a finished appearance by covering exposed edges or gaps
• Helps maintain alignment of nearby panels or glass
• Replace if cracked, warped, missing, or no longer seats securely
• Common symptoms include loose/rattling panels and exposed or sharp edges

• Disconnect power; for gas models, also shut off the gas supply
• Wear gloves—edges can be sharp
• Remove old trim and transfer/reuse original screws or clips
• Align the new trim and secure with existing fasteners; confirm proper fit before reassembly

Replacement mounting screw that secures panels, trim, and components in ranges and ovens. Needed when original screws are lost, stripped, or damaged.

The Start Capacitor is an OEM part for Frigidaire combination washer/dryer laundry centers. It refers to an electronic component located within the motor control circuit board. 

This capacitor helps initiate drum movement by providing a boost of electrical current to the drive motor during appliance activation or changes in rinse/spin speed. Smooth start-ups and shifts in agitation depend on proper current delivery.

Causes of a bad start capacitor can be cracking of the outer casing from extended duty cycles or voltage fluctuations degrading dielectric plates inside over many years.

Symptoms include:

• Struggling motor that strains excessively to turn the drum
• Cycles failing to advance after starting or resume spinning  
• Unsteady or intermittent pulsing agitation noises

Replacing with a Frigidaire OEM capacitor ensures dependable motor torque for each phase of the cycle. Compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
 

Washer won't spin or agitate? This transmission and pulley assembly powers drum rotation and belt movement. Moderate DIY repair with spanner wrench.

Secures the dryer door to the cabinet and provides a smooth pivot point. Replace this hinge if bent, worn, or broken to restore proper door alignment.

If your washer won't start or shows no response despite power, the motor control board may have failed. This part controls motor and pump operations.

This is the hinge receptacle that secures the oven door hinge to the range frame, allowing the door to pivot open and closed smoothly. It acts as the mounting socket where the hinge arm locks into place. Replace this part if the oven door is sagging, not closing evenly, or if the hinge feels loose or disconnected from the frame.

Cast iron cooktop grate provides stable support for pots and pans over gas burners. Replace cracked, warped, or missing grates to restore safe cookware placement.

This is a small metal or plastic retainer clip that secures the main top panel of the dryer to the cabinet frame. It holds the top panel firmly in place so it doesn't shift or rattle during operation. If your dryer's top panel feels loose, pops up during use, or won't stay properly seated, this clip may be broken or missing.