Ffle3900uwo Parts

Secures the dryer door to the cabinet and provides a smooth pivot point. Replace this hinge if bent, worn, or broken to restore proper door alignment.

This is a small metal or plastic retainer clip that secures the main top panel of the dryer to the cabinet frame. It holds the top panel firmly in place so it doesn't shift or rattle during operation. If your dryer's top panel feels loose, pops up during use, or won't stay properly seated, this clip may be broken or missing.

The Nut is an OEM part for Frigidaire washers. It secures the washer's motor in place, ensuring stability and proper functioning during operation.

A bad nut can be caused by wear and tear, damage, or improper installation. Signs of a faulty nut include the motor becoming loose, excessive vibration during operation, or unusual noises coming from the washer.

Symptoms of a bad lock nut include:

• The motor becoming loose or shifting position 
• Excessive vibration or shaking of the washer
• Unusual noises coming from the washer

Replace your worn-out or damaged nut with this genuine OEM part to restore your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Start Capacitor is an OEM part for Frigidaire combination washer/dryer laundry centers. It refers to an electronic component located within the motor control circuit board. 

This capacitor helps initiate drum movement by providing a boost of electrical current to the drive motor during appliance activation or changes in rinse/spin speed. Smooth start-ups and shifts in agitation depend on proper current delivery.

Causes of a bad start capacitor can be cracking of the outer casing from extended duty cycles or voltage fluctuations degrading dielectric plates inside over many years.

Symptoms include:

• Struggling motor that strains excessively to turn the drum
• Cycles failing to advance after starting or resume spinning  
• Unsteady or intermittent pulsing agitation noises

Replacing with a Frigidaire OEM capacitor ensures dependable motor torque for each phase of the cycle. Compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
 

This is the front access panel for the dryer section of a laundry center, finished in white with a felt seal along the edges. It encloses the dryer drum area and helps maintain proper airflow and heat retention during drying cycles. Replace this panel if it is dented, cracked, or if the felt seal is worn or missing, which can cause heat loss or unusual noises during operation.

Replacement screw that secures panels and components in dryers, washers, and ranges. Needed when original fasteners are missing, stripped, or worn.

The  Bracket assembly is an OEM replacement part for Frigidaire washing machines. This bracket assembly contains an arm that detects any out of balance vibrations in the washing tub during the spin cycle. If excess vibrations are sensed, the arm will trip an internal switch to stop the cycle and prevent potential damage.

Symptoms of a bad bracket include: 

• Inability to complete high-speed spin cycles
• Premature ending of the spin portion of cycles  
• Error codes related to tub imbalance
• Excessive shaking felt in the washer cabinet or surrounding floor area

Causes of failure can be worn or loose mounting points that reduce the arm's sensitivity over time. Constant back-and-forth movement also causes fatigue that impairs the bracket's balance detection capabilities.

This OEM part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This is a replacement mounting screw used to secure appliance panels, brackets, and components. Replacing worn or missing screws restores proper fit and reduces rattles or loose parts for safe, stable operation. What it does:

• Secures panels, brackets, trim, or small components in place
• Helps eliminate rattling, vibration, and loose or misaligned parts
• Restores proper fastening after maintenance or part replacement
• Matches the appliance's original fastener style for correct fit

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct driver bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent thread or component damage

This is a replacement screw used to secure appliance panels and components. It provides a direct-fit fastener to restore secure mounting and proper alignment of parts after repair. What it does:

• Secures panels, brackets, trim, or small components to the appliance frame
• Restores proper alignment and prevents rattling or loose parts
• Helps maintain safe, stable operation when used in the intended mounting location
• Works as a direct replacement for the original fastener when the correct PN is specified

• Use the matching screw hole and thread engagement; do not force or cross-thread
• Tighten to snug fit—avoid over-tightening which can strip threads or crack plastic
• If replacing multiple fasteners, use identical part numbers for consistent fit
• Disconnect power and follow appliance safety guidelines before accessing internal parts

Phillips pan head screw for securing panels and components in appliances. Replace missing, stripped, or corroded screws during repairs or maintenance.

Self-leveling leg pad for washers and laundry appliances. Replace worn, cracked, or missing pads to stabilize your unit and protect flooring.

Ceramic dryer heating element housing insulator.

Mounting screw secures panels, trim, or brackets in dryers, washers, and ranges. Replace lost, stripped, or corroded screws to restore stability.

Replacement mounting bracket that secures washer panels and components. Needed when original bracket is cracked, broken, or missing, causing loose or misaligned parts.

Flat metal washer that distributes load from nuts or bolts in your laundry center assembly. Replace if worn, missing, or damaged to maintain proper fastener seating and prevent loosening over time.

The Housing Assembly is an OEM part for Frigidaire dryers. It houses the blower wheel, which is responsible for circulating air throughout the dryer drum, ensuring drying of your laundry.

A bad blower housing can be caused by damage, wear and tear, or clogs. Signs of a faulty housing include reduced airflow, longer drying times, or unusual noises coming from the dryer during operation.

Symptoms of a bad blower housing include:

• Reduced airflow within the dryer drum
• Excessive heat inside the dryer
• Unusual noises during operation

Replace your damaged or worn-out blower housing with this genuine OEM part to restore your dryer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.