Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Aluminum strap secures the defrost heater against the evaporator coil. Replace if broken, cracked, or missing to maintain proper heater contact.
Removed the freezer shelves and back panel, evaporator coils were frozen with ice. Defrosted coil and removed defrost heater connectors, measured no continuity in the heater and ordered a replacement. Also discovered the aluminum retention strap was broken and the heater had slipped down in it's position, ordered and replacement strap. Re-installed new heater and strap per the video instructions, repair complete. Most difficult steps were drilling out the drain pan rivet and re-threading... Read more
Fix floor puddles and musty odors caused by a cracked defrost drain pan. This pan collects defrost water and allows it to evaporate. Easy DIY fix.
Chewed up plastic parts. All the parts that I received were correct and was easy to install Read more
The Power Cord is an OEM replacement part for Frigidaire refrigerators. As the lifeline connecting the appliance to a wall outlet, this cord safely delivers necessary voltage to operate refrigerator systems.
Potential causes for needing a new power cord include exposure to cuts, abrasions or rodent damage over time in the storage area. Repeated bending stress during installation or removal can also wear out plastic insulation faster.
Symptoms of a faulty power cord include:
This power cord also fits some Electrolux and Gibson refrigerators.
Warm spots in lower fridge? This bottom air diffuser directs cold air to maintain even temperatures. Simple snap-in installation restores airflow.
My only problem was I didn't have the part in stock. I do maintenance at a 150 unit Apt. complex. The fridgidare model we have all 3 shelves are different. This repair was so simple a 2 year old could do it. The rest of my order was for stock. Things get broken quit often at work which is good for job security. Read more
Limits refrigerator door opening range to prevent overextension and hinge damage. Replace worn or broken stops to restore controlled movement.
I ordered the door stops (or door cams) for both the fridge and freezer and the hinge bearings. I figured I might as well do both if I'm going to do one. Very easy. Watched a YouTube video. Got a link to the site to order the parts. All you need is a screwdriver and ratchet. Done in 30 minutes. Read more
Black center hinge bracket mounts between refrigerator doors to support and align them. Replace if bent, cracked, or worn to restore proper door swing.
Covers the factory test opening on your refrigerator cabinet or liner. Replace if missing, cracked, or damaged to restore a finished look and seal.
Color: White
Using the make and model of the refrigerator, I did some research on the internet to find a detailed diagram of the door. I then found AppliancePartsPros.com. Since the diagram was somewhat difficult to see clearly, the representative I spoke with on the phone went the extra mile to be sure I ordered the correct parts. Read more
This control box is the molded assembly in the refrigerator compartment that supports the temperature control and air duct components. Replacing a cracked or sagging box helps restore a secure mount and proper airflow routing. What it does
Replaces the air diffuser assembly that directs cold air from freezer to fresh-food section. Needed when original is cracked, broken, or missing insulation.
Replaced the deffuser kit. The original was missing a foil strip that blocked the water. Read more
Fixes persistent odors in your refrigerator's fresh-food compartment. This air purifier assembly restores odor-control and air-freshening performance.
After checking that there was power to and into the refrigerator, I figured it must be the control board. I replaced it and all is well. Read more
Molded plastic deflector that directs airflow inside your refrigerator. Replace if cracked, warped, or missing to restore proper air circulation.
Restores tight seals to stop leaks, drafts, and temperature loss. Replace when you notice gaps, noise, or moisture issues. Verify fit with your model.
Fits between the refrigerator door and hinge pin to set door height and reduce friction. Replace if worn, missing, or damaged for smooth door movement.
It was easy to fix and I am so glad I bought it from this website. The price on this website was half of your competitors! Thank you for not taking advantage of others! Read more
Replaces cracked, broken, or missing compartment cover in your refrigerator. Restores clean appearance and shields internal components and wiring.
Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.