Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Aluminum strap secures the defrost heater against the evaporator coil. Replace if broken, cracked, or missing to maintain proper heater contact.
Removed the freezer shelves and back panel, evaporator coils were frozen with ice. Defrosted coil and removed defrost heater connectors, measured no continuity in the heater and ordered a replacement. Also discovered the aluminum retention strap was broken and the heater had slipped down in it's position, ordered and replacement strap. Re-installed new heater and strap per the video instructions, repair complete. Most difficult steps were drilling out the drain pan rivet and re-threading... Read more
Routes water from inlet valve to dispenser and ice maker. Replace if tube is cracked, leaking, kinked, or damaged to restore proper water routing.
The online video to change the water tube from the solenoid to filter was very helpful. It made the project straightforward. I had to replace the water tank tube as well. It was more challenging because there was no video for my model refrigerator (Frigidaire French Door) but a side-by-side unit video provided enough hints. The hardest part was getting the tube into the tank housing. The original water tank was smaller than the replacement. It required some serious persuasion to squeeze... Read more
Slide assembly secures and guides crisper or pantry drawer bins in your refrigerator. Replace if slides are bent, broken, or drawer won't glide smoothly.
Ordered part from you and installed it Read more
Direct replacement handle for refrigerator freezer baskets. Restores secure grip for lifting and removing baskets. Replace cracked, broken, or missing handles.
As easy as 1, 2, 3. Too simple to fix. Just screw in the screws. Read more
Fix a refrigerator not making ice or dispensing water with a new water inlet tube. Restores proper flow from valve to ice maker and dispenser.
Part sent fit perfectly. Read more
Color: White
Using the make and model of the refrigerator, I did some research on the internet to find a detailed diagram of the door. I then found AppliancePartsPros.com. Since the diagram was somewhat difficult to see clearly, the representative I spoke with on the phone went the extra mile to be sure I ordered the correct parts. Read more
Channels defrost water from the evaporator to the rear drain pan. Replace this tube if it's cracked, clogged, missing, or has become brittle over time.
Simply pushed the parts in place. Read more
Replacement screw secures door handles, brackets, panels, and trim to refrigerator mounting points. Install when hardware is missing, stripped, or loose.
Had to buy a new handle. Very easy to install. The part was delivered in one day. Read more
This small permanent magnet is used in supported refrigerator assemblies to actuate a mating reed switch or metal keeper. It helps the appliance recognize a closed position or hold a light cover/door closed for proper operation. What it does:
Refrigerator handle mounting block that secures door handles to the refrigerator door. Replace if cracked, broken, or missing to restore proper handle attachment.
Small retainer clip that secures components, panels, tubes, or wires in place inside your refrigerator. Replace when worn, broken, or missing to restore fit.
Fix a refrigerator that won't cool, has defrost issues, or won't power on. This main control board regulates temperature and all cooling functions.
The Drawer Glide Gear is an OEM replacement part for Frigidaire refrigerators. It is a metal component located on each side of wire shelf tracks that work together to make shelf and drawer movements smooth.
Causes of bad glide gears can include wear from years of extended usage, dents or deformation that restrict proper motion, or failure of lubricating parts inside the gear mechanism.
Symptoms of a bad Drawer Glide Gear include:
As a high-stress moving part, glide gears can degrade and lead to slothful storage access over time. Replace with this genuine OEM component for optimally smooth shelf performance on your Frigidaire refrigerator. The replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Positions the condenser fan and motor in the rear machine compartment. Replace if cracked, warped, or damaged to restore proper airflow direction.
Fix cracked or damaged dispenser trim on your refrigerator. This external trim piece surrounds the ice and water dispenser area on the door.
Support bar for refrigerator freezer drawer assembly. Installs between roller tracks to stabilize drawer and prevent shifting. Replace if broken or missing.