Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This turntable roller assembly sits under the glass tray to support and guide it as it rotates. Replacing a worn or damaged ring helps restore smooth tray movement for more even heating and dependable microwave performance.
Adjustable humidity control slider for refrigerator crisper drawer covers. Replaces cracked, broken, or missing controls to restore smooth vent operation.
This was a simple replacement of the crisper drawer and humidity control sliding switch; easy to snap into place and align with the tracks. Read more
Secures the crisper cover slide for smooth, aligned operation. Replace if broken or missing to restore proper drawer function. Confirm fit with your model.
Shelving went in without a problem. Very simple. Checked the installation video anyway in case there was a trick to not breaking something. Learned that the nylon clips needed to be transferred and found one missing on another shelf, so ordered a replacement. The water valve was one I replaced some time ago but one of the solenoids was bad, confirmed with a meter (ohm reading is between 200-500; less than 200 or more than 500 is broken). Replaced it without a problem (becoming expert at... Read more
Ice falling through cracked bin into freezer? This ice storage container restores proper ice collection and prevents spillage. Simple DIY fix.
Replaced the container. Read more
Replacement mounting screw for refrigerators and freezers. Secures shelves, handles, panels, and brackets. Replace missing, stripped, or rusted screws.
Ice not dispensing or jamming? A worn auger can't move cubes from bin to chute. This rotating shaft restores smooth dispensing. Moderate DIY repair.
Initially I noticed the crusher drum was cracked and broken so I replaced the drum the retaining nut on the end of the auger and the circlip and washer. it worked fine for a time and then the drum began free wheeling. upon further inspection I discovered the retain nubs on the auger had worn down allowing the blade to slip down the auger body. so I replaced the auger, drum, drive blade, and drive cam. I recommend if you gave a problem with the ice dispenser you break down and inspect the entire... Read more
Supports and aligns the refrigerator door at the hinge pivot point. Replace if cracked, bent, or worn to restore stable door operation and proper sealing.
Connects sections of water tubing inside your refrigerator. Replace this adapter if cracked, leaking, or popping off to stop drips and water damage.
Ordered parts, watched videos and had it like new in five minutes! Read more
Specs: Hex head ,1/4-20 x 5/8
My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more
Ice dispenser not dispensing or crushing properly? The drive cam transfers motor rotation to advance the ice dispensing cycle. DIY repair in 30-45 minutes.
Shroud assembly that covers internal refrigerator components and directs airflow. Replace if cracked, damaged, or missing to restore proper airflow paths.
Replaces a cracked, broken, or missing front edge trim on your refrigerator shelf. Restores the finished lip that supports items and prevents spills.
Ordered shelf and plastic front edge from Appliance Parts Pros for my side-by-side Frigidaire Refrigerator/Freezer. Had very, very fast delivery. Read more
This compressor with mounting clip is the sealed refrigeration compressor assembly that circulates refrigerant to keep your refrigerator cold. Replacing a failed compressor restores the system's ability to cool when repairable. What it does:
Factory replacement screw for securing panels, brackets, and trim inside your refrigerator. Needed when original screws are missing, stripped, or corroded.
Bought replacement part, exact fit. 2 screws out, 2 screws in EASY PEEZY. Hardest part was finding my 3/8 socket and waiting for the part which came way faster then expected. This is 2nd time APP saved me. Last time was for a 37 dollar relay that my appliance guy told me was my compressor. He told me to buy a new fridge because he wasn't going to replace the compressor. That was 3 years ago, :) Read more
Aluminum strap secures the defrost heater against the evaporator coil. Replace if broken, cracked, or missing to maintain proper heater contact.
Removed the freezer shelves and back panel, evaporator coils were frozen with ice. Defrosted coil and removed defrost heater connectors, measured no continuity in the heater and ordered a replacement. Also discovered the aluminum retention strap was broken and the heater had slipped down in it's position, ordered and replacement strap. Re-installed new heater and strap per the video instructions, repair complete. Most difficult steps were drilling out the drain pan rivet and re-threading... Read more
Limits refrigerator door travel to prevent over-rotation and protect hinges. Replace this plastic stop if cracked, broken, or missing to maintain alignment.