Fgid2474qfob Parts

This switch assembly restores electrical on/off control for a specific appliance function. Replace a worn or failed switch to stop intermittent operation and return reliable control to the affected circuit. What it does:

• Provides the electrical on/off or function control for the appliance circuit.
• Replaces a failed switch that can cause intermittent operation or unresponsive controls.
• Helps resolve symptoms such as a function that won't start, no response from the control, or erratic switching.
• Connects to the existing wiring harness and mates with the original mounting points.

• Disconnect power to the appliance before beginning any work.
• Remove the appropriate access panel to reach the switch; note wire and terminal locations before disconnecting.
• Unplug the wiring harness or carefully detach terminals, swap the switch assembly, then reconnect securely.
• Restore power and verify the replaced switch operates the function correctly.

The Rack Stop is an OEM part for Frigidaire dishwashers. It serves an important purpose by preventing loaded dishes from shifting forward during wash cycles.

Causes of a bad rack stop can include wear and tear from regularly loading and unloading dishes, as well as minor impacts that cause cracks or breaks. Over time, the mounting screws may also loosen.

Symptoms of a bad rack stop include:

• Dishes shifting forward during wash cycles
• Gaps appearing around the dish rack where dishes are not fully secured
• Noise from dishes banging together or rattling around more than usual
• Potential damage to more delicate dishware

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Replacement sensor assembly that detects appliance operating conditions and sends readings to the control system for proper operation. Installing a working sensor restores reliable feedback and helps resolve related error codes or inconsistent performance. What it does:

• Detects operating conditions and provides electrical feedback to the appliance control.
• Enables the control board to monitor and adjust cycles based on measured readings.
• Faulty or intermittent sensors can cause incorrect readings, error codes, or unstable/incorrect appliance operation.
• Replacing a failed sensor restores accurate sensing and helps return the appliance to normal function.

• Always disconnect power to the appliance before starting work to avoid shock or injury.
• Handle the sensor and wiring gently; avoid pulling on wires or bending sensor probes sharply.
• Ensure connectors are fully seated and routed clear of moving parts or heat sources.
• After installation, restore power and verify proper operation and that any previous error codes are cleared.

This is a replacement lower spray arm for dishwashers. It rotates to direct pressurized water across dishes, restoring proper spray coverage and improving cleaning performance. What it does:

• Delivers rotating, pressurized water to rinse and clean lower-rack dishes
• Replaces worn, cracked, or clogged spray arms that reduce washing effectiveness
• Helps stop symptoms like poor cleaning, leftover food on plates, or uneven wash cycles
• Works with existing spray arm hub and fastener when undamaged

• One lower spray arm

• Disconnect power and water supply to the dishwasher before servicing
• Remove lower rack and inspect hub/fastener for damage before installing the new arm
• Install and secure the spray arm per your dishwasher's service instructions; ensure it spins freely
• Run a short wash cycle to verify proper rotation and that no leaks or unusual noises occur

This spray arm circulates pressurized water to clean dishes by directing spray across the rack. Replacing a damaged or clogged spray arm restores proper water distribution for more consistent wash performance. What it does:

• Rotates and delivers water to clean dishes and glassware during wash cycles
• Helps maintain even coverage across the dishwasher rack for better cleaning
• Can cause poor wash results, visible spots, or debris left on dishes when cracked or clogged
• Worn or broken spray arms may rattle or fail to rotate during operation

• One spray arm

• Disconnect power and water supply before beginning any repair
• Remove the lower and/or upper rack as needed to access and replace the spray arm
• Inspect mounting hub and seals; replace any worn clips or gaskets per manufacturer guidance
• Test a short cycle after installation to confirm rotation and proper spray pattern

This genuine refrigerator water tank stores and supplies water to the dispenser and ice-making system, restoring normal water flow and reducing leaks from a damaged reservoir. It fits behind the front grille or inside the cabinet depending on model. What it does:

• Holds and channels water for the dispenser and icemaker, maintaining proper supply
• Replaces cracked, leaking, or warped reservoirs that cause visible leaks
• Restores normal dispenser flow when a damaged tank restricts water delivery
• Prevents intermittent filling issues caused by a compromised reservoir

• One water tank/reservoir

• Disconnect power and shut off the water supply before starting
• Handle carefully to avoid damage to fittings and seals during removal/installation
• Inspect and replace any worn gaskets or tubing connections for a leak-free seal

This O-ring is a small rubber sealing ring that restores a watertight seal at a connection point to help stop leaks and prevent water damage. It's a simple, low-cost part used where two parts meet. What it does

• Seals joints to prevent water leaks at valve, hose or fitting connections
• Stops dripping or pooling caused by a damaged or worn seal
• Helps maintain proper flow and pressure by keeping connections tight
• Works wherever the OEM specifies this exact O-ring size and shape

• Disconnect power and shut off the water supply before servicing
• Replace only with the exact O-ring size specified by the OEM for a proper seal
• Inspect mating surfaces and clean debris before installing the new O-ring
• Lubricate with a small amount of food-grade silicone lubricant if OEM guidance recommends it; avoid petroleum-based lubricants on rubber seals

This replacement duct directs internal airflow to ensure proper ventilation and temperature balance inside the appliance. Restores designed air routing to help prevent overheating, poor circulation, or uneven cooling. What it does:

• Channels airflow between components to maintain consistent operating temperatures.
• Helps reduce abnormal noise or vibration caused by disrupted air paths.
• Prevents hot or cold spots that can lead to performance issues.
• Supports proper ventilation for motors, compressors or heating elements.

• Disconnect power (and water if applicable) before starting any repair.
• Access may require removing exterior or interior panels; keep fasteners organized.
• Check orientation and sealing surfaces for proper fit; replace any damaged clips or gaskets.
• Wear gloves to protect hands from sharp sheet-metal edges and follow all manufacturer safety instructions.

This electronic control board replaces the refrigerator's main user interface control, restoring reliable temperature management and cycle sequencing. It lets the appliance receive user inputs and run timed defrost, compressor, and fan operations. What it does:

• Houses the control circuitry that manages cooling cycles, defrost timing and fan/compressor operation
• Responds to user input from the front control panel and translates commands to the appliance systems
• Can stop or reset erratic cycling, display control errors, or fix non-responsive controls when the board is faulty
• Common symptom: unresponsive control panel, incorrect temperatures, or failure to start compressor or defrost cycle

• High-level replacement only — disconnect power before accessing electrical components
• Handle the board by its edges and avoid static discharge; use an anti-static wrist strap if available
• Verify connectors are fully seated and wiring matches original locations before restoring power

The NUT is an OEM component specifically designed for Frigidaire dishwashers. This nut plays a vital role in maintaining stability and secure positioning of internal dishwasher components. 

Symptoms of a bad nut include movement or wobbling of interior dishwasher parts, odd noises emanating from within the unit, or leaks developing around improperly positioned or tightened components.

Causes of a bad nut can include wear and tear over time, damage from excess strain on connectors and joints, or improper installation during assembly. 

Some symptoms of a bad nut include:

• Vibration or shaking of internal parts 
• Loose interior panels or assemblies
• Difficulty latching or securing the dishwasher door
• Water leaks into areas not designed for moisture

This OEM Frigidaire replacement part is compatible with Electrolux, Gibson, Kelvinator, and select Kenmore models. 

This control assembly is the appliance's main electronic console that manages cycles, settings, and user inputs for proper operation. Replacing a faulty control restores responsive controls and reliable cycle selection. What it does:

• Receives and processes user commands from the front console
• Sends signals to timers, motors, valves, and heaters to run selected cycles
• Prevents or causes erratic operation when the control fails (unresponsive buttons, no start, or incorrect cycles)
• May display error codes or no display when the control is faulty

• One control assembly

• Disconnect power to the appliance before beginning any work
• Handle electronic boards and ribbon connectors carefully to avoid static or physical damage
• Retain all mounting hardware and transfer any brackets or connectors from the old control if needed

This is a small mounting clip used to secure panels and trim on compatible Frigidaire appliances, helping keep exterior parts aligned and stable. Replaces a worn or broken clip to reduce rattling and loose panels. What it does:

• Secures trim, panels or small components to the appliance frame
• Prevents movement that can cause rattling, gaps or misaligned panels
• Replaces clips that are cracked, bent or missing, restoring proper fit
• Designed for a discreet, low-profile hold without affecting appearance

• Turn off and unplug the appliance (or shut off power) before accessing panels
• Remove surrounding trim or screws as needed to reach the clip location
• Press or snap the clip into place; use care to avoid cracking plastic parts

These side strips are exterior cabinet trim pieces that restore a finished look and protect the refrigerator cabinet edges. They replace damaged, loose, or missing side trim to improve appearance and help keep edges covered. What it does:

• Covers and protects the vertical cabinet edges from chips, dings, and everyday wear
• Conceals gaps between the cabinet and the door or liner for a neater appearance
• Replaces cracked, warped, or missing trim that can make the appliance look worn
• Helps maintain a continuous exterior finish along the refrigerator sides

• Service-friendly trim; typically snaps or screws into place—inspect fasteners before removal
• Remove damaged strips carefully to avoid scratching the cabinet; use appropriate trim tools if needed
• Keep work area clear and support panels during installation to prevent drops or damage
• If working near electrical components, unplug the appliance or turn off power at the breaker

This replacement rail restores smooth sliding and support for a drawer or shelf assembly, helping the component open and close reliably. Use when a worn or damaged rail causes sticking, misalignment, or instability. What it does

• Provides a guided track for a drawer or shelf to slide in and out
• Replaces bent, cracked, or worn rail surfaces that cause sticking or catching
• Helps eliminate wobbling, uneven travel, or a drawer that falls out of the track
• Restores proper alignment so the drawer or shelf seats and locks correctly

• One replacement rail

• Disconnect power to the appliance and remove contents before servicing
• Remove the drawer or shelf to access mounting fasteners
• Use basic hand tools; keep track of clips and screws for reassembly
• Inspect the opposite rail/sides; replace matching components if worn for best performance

This replacement leveling foot provides a stable, height-adjustable support for your appliance so it sits level and reduces rocking. It restores proper alignment for smooth door operation and even weight distribution. What it does:

• Replaces a worn or damaged support foot to stop rocking and improve stability
• Allows small height adjustments to level the appliance on uneven floors
• Helps maintain proper door closure and reduce vibration noise
• Fits under the appliance cabinet and bears operational weight

• One leveling foot

• Unplug the appliance or disconnect power before working underneath it
• Use a helper or an appliance dolly to safely raise and support the unit while replacing the foot
• Thread the foot into the mounting bracket or cabinet insert until it contacts the floor, then adjust as needed

This Overflow Hose is an OEM part for Frigidaire dishwashers. This ensures proper water drainage during the dishwasher's operation, preventing overflows and leaks.

Causes of a Bad Part: Over time, the overflow hose can degrade due to exposure to heat, chemicals, or physical damage. Blockages or kinks might also impede proper water flow.

Symptoms of a Bad Part:

• Water leaks from the dishwasher
• Inadequate drainage leading to overflows
• Visible cracks or damage on the hose

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.