Flcg7522aw4 Parts

This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.

• Fastens the drum baffle/lifter (vane) to the rotating drum
• Helps maintain proper tumble and load turnover
• Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
• Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes

• Disconnect power before servicing; shut off gas
• Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
• Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
• Start all screws before final tightening to seat the baffle evenly

The Gas Valve is an OEM part for Frigidaire dryers. It is a component that controls the flow of gas to the burner during the drying cycle. The gas valve regulates the amount of gas delivered based on cycles, selected temperatures, and dryness settings.

Causes of a bad gas valve can include wear and tear over time that causes seals to crack or oxygen sensors to malfunction, allowing gas to escape or leak.

Symptoms of a bad gas valve include:

• Delayed or slow drying times
• Uneven drying results
• Strange smells coming from the dryer
• The dryer fails to ignite or stay lit
• Excessive amounts of lint in the lint trap

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

White door handle for laundry center dryer door. Replaces cracked, loose, or missing handles. Restores secure grip for opening and closing the door.

Secures the dryer motor in proper position for stable operation. Replace if motor shifts, buzzes, or clamp strips out. Confirm fit with your model number.

Dryer not heating? A failed igniter won't light the gas burner. This glow-bar igniter heats up to ignite gas during each cycle. Moderate DIY repair.

This sensor monitors appliance conditions and relays a signal to the control so heating, cooling, or cycle functions occur at the right time. Replacing a failing sensor restores accurate feedback and more reliable operation.

• Detects operating conditions and sends signals to the control board
• Helps regulate heating/cooling output or cycle timing
• Common symptoms of a failed sensor: erratic operation, incorrect readings, cycles that won't start/finish, or related error codes
• Restores proper control feedback when the original is damaged or out of range

• Disconnect power to the appliance before servicing
• Access the sensor per your service manual; note wire colors/orientation and connector locks before removal
• Transfer any mounting clips or brackets from the original if required
• After installation, run diagnostics or verify resistance/continuity per the tech sheet to confirm proper operation

The LP Conversion Kit is an OEM part for Frigidaire dryers. It is designed to convert a gas dryer from natural gas to propane fuel. This kit includes all the necessary parts and instructions to safely and effectively make the conversion.

Causes for needing a gas to propane dryer conversion kit can include a change in fuel type in your home or relocating the dryer to an area where propane is the available fuel source.

Symptoms that indicate you need to replace the conversion kit include:

• The dryer not igniting or producing heat 
• A strong smell of gas when attempting to operate the dryer 
• Any of the parts in the kit becoming damaged

Make the necessary adjustment and convert your Frigidaire gas dryer to propane with this genuine OEM conversion kit. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Fix a washer that won't spin or agitate with this laundry center drive belt. Connects motor to drum for spinning and washing. Moderate DIY repair.

The Suspension is an OEM part for Frigidaire top-loading agitator washing machines. It refers to springs and vibration-dampening mounts underneath the wash tub. 

These components absorb mechanical stresses from unbalanced loads and support the heavy rotating assembly without added noise transfer to adjacent surfaces. Keeping tub components properly isolated is important for structural integrity over many years.

Symptoms of a worn suspension include: 

• Visible movement and shaking of the entire machine on top of the unit  
• Screeching or screeching noises when agitating heavy loads
• Fastener screws backing out or washing tub no longer level

Replacing with Frigidaire OEM suspension parts renews shock absorption to maintain steady cycles and protect connected plumbing. This is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore top load models.
 

This air duct seal creates a tight barrier between the dryer's lint housing and cabinet. Replacing a worn seal helps prevent air leaks, maintain proper airflow through the lint filter, and restore consistent drying performance.

• Seals the air duct/lint housing to the front panel to direct airflow through the lint screen and drum
• Helps maintain dryer efficiency and temperature control by preventing bypass air leaks
• Common symptoms of a failed seal include longer dry times, weak exhaust airflow, excess lint inside the cabinet, or lint around the door opening
• Replaces a deteriorated or missing seal to restore the intended air path

• Disconnect power; shut off gas supply for gas models
• Access the air duct by removing the lint screen and top/front panels as needed
• Remove the old seal and any residue; clean mating surfaces before installing the new seal
• Seat the duct evenly against the panel when reassembling to ensure a uniform seal

Pulley assembly powers tub rotation during wash cycles. Replace if worn from use, damaged by broken belts, or rusted from water exposure. Confirm fit.

Adjustable leveling leg that mounts underneath your laundry center to balance and stabilize the unit. Replace if cracked, bent, or missing threads.

Dryer won't heat? A faulty gas burner assembly prevents proper flame and ignition. This part restores heat for efficient drying. DIY repair in 1-2 hours.

Keep your dryer tumbling smoothly by restoring proper belt tension. This idler spring attaches to the idler arm and maintains tension on the drive belt so the drum turns reliably without slipping or squealing. What it does:

• Applies constant tension to the idler pulley to keep the drive belt tight around the drum and motor
• Helps resolve a drum that won't turn or tumbles intermittently
• Addresses belt issues such as slipping off, appearing loose, or premature breakage from low tension
• Can reduce squealing/chirping from the idler area caused by belt slip

• 1 idler spring

• Disconnect power; for gas dryers, also shut off the gas supply
• Access the idler assembly by removing the front or lower access panel per your model
• Relieve belt tension, unhook the old spring from the idler arm/frame, and install the new spring in the same orientation and holes
• Rotate the drum by hand to check smooth operation before reassembly

This safety thermostat is a temperature-sensitive switch that helps protect your appliance from overheating. When excessive heat is detected, it opens the circuit to stop power to critical components, helping prevent damage and ensuring safe operation.

• Monitors temperature at a specific location and interrupts power if it exceeds a safe limit
• Can cause no power, no heat, or shutdown during use when failed or tripped
• Helps prevent overheating damage to internal components
• Restores normal operation when replaced

• Disconnect power to the appliance before service
• Note wire positions and terminal orientation before removal
• Use proper tools and avoid bending or stressing terminals
• After installation, check for underlying overheating causes (blocked airflow, failed fan, etc.)

If your washer won't agitate or spin properly, the transmission may have failed. This mechanical component engages the drum during wash and spin cycles.