Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Soap dispenser door won't open or latch is broken? This detergent dispenser assembly fixes dispensing failures. DIY repair takes 10-15 minutes.
This was a pretty easy fix. Removed the screws around the perimeter of the inside cover of the door and pressed the outer door cover upward to release it from slots retaining it. There are four wires to remove (2 for the detergent door release and 2 for the rinse agent release). Removed the 6 screws retaining the dispenser assembly and inserted the new one. Reassembly is simply in reverse order. Problem solved for less than the cost of a service technician's call! Read more
This side mounting bracket kit includes the hardware needed to secure a dishwasher to the adjacent cabinetry from the sides rather than from the countertop. It is commonly used in kitchens with granite, stone, or other countertops where top-mounting screws cannot be used. Replace this kit if the original brackets are bent, broken, or missing, causing the dishwasher to shift or slide during operation.
Installed this part Read more
Secures the kickplate toe panel at the bottom of your dishwasher. Replace if screw is stripped, missing, or damaged during kickplate removal or repairs.
Easy job, I screwed the parts to the dishwasher Read more
Fix a dishwasher that stops mid-cycle, overheats, or won't heat water. This thermostat regulates temperature during wash cycles. Moderate DIY repair.
So I replaced the hi-temp thermostat and the problem is fixed. Read more
Secures the fold-down tine row to your dishwasher rack so it pivots and locks correctly. Replace this bracket if cracked, broken, or missing to restore stable plate support.
Ordered the correct part and two clips to hold it in place. I supervised my wife to make the repair. Read more
This roller assembly mounts to the bottom of a dishwasher dishrack and allows it to slide in and out of the tub smoothly. It typically includes the roller wheel, axle, and mounting clip. Replace this part if the dishrack is difficult to pull out, rolls unevenly, or if the roller is cracked, worn, or has fallen off the track.
Two years ago replaced all four roller assemblies of affected side. Problem recently reoccured on the opposite side. Replaced all four roller assemblies on that side. Entire repair took about twenty minutes. Read more
Fix a dishwasher that won't drain, makes clicking sounds, or leaks underneath. This pump and motor assembly typically takes 20-60 minutes to install.
Diagnosed the problem. The pump motor needed to be replaced. Took model number and looked part up on Appliance Parts Pro site and found the exact part. Ordered part with next day delivery . Part arrived as scheduled. Simple installation. Works like new. Thanks. Read more
Fix water leaking from your dishwasher or overfilling issues. This float assembly monitors water levels to prevent overflow and flooding damage.
Covers and protects the dishwasher pump assembly. Replace if cracked, broken, or if plastic guides are stripped causing spray arm support issues.
The cover was easy to remove with 3 star head screws. I entered my model number on AppliancePartsPros.com dreading the cost I was about the encounter. However, the parts were very cheap, in stock, and shipped within an hour of my order. I had a question about the tracking number and received an email back in less than an hour. The cost for both parts and standard shipping was under $30. Once I received the parts, the new cover was installed, the rest of the assembly was put back back... Read more
This metal mounting bracket secures the circulation pump motor inside the dishwasher. It holds the pump assembly firmly in place to prevent vibration and ensure proper alignment with the wash system. Replace this bracket if it is cracked, bent, or corroded, which can cause excessive noise, vibration, or misalignment of the pump during wash cycles.
Bought combination set Motor & pump/ pump assembly plus new thermostat/ bracket. Exchanging motor and pump took about 15-30 min. Getting the dishwasher out and back took at least 30 min plus each way. Online video helped a great deal Read more
Fix a dishwasher that won't start or run because the door won't latch. This strike receiver allows the latch to engage and signal a closed door.
I have a Kenmore dishwasher and this is the second time doing this repair. The dishwasher door wouldn’t click in place when closed and the lights on the control panel wouldn’t turn on. My kids like to push on the handle to get onto the counter causing the latch assembly piece to break after awhile. It’s a simple fix with the hardest part being getting the front panel lined back up to put back on. I ended up not needing the strike piece but got it just in case it had been bent. Read more
Lower spray arm for dishwashers. Installs at the bottom of the tub. Replace if broken, cracked, or missing to restore proper water distribution.
Secures components and panels inside your dishwasher. Replace if cracked, broken, or missing to restore proper alignment and prevent rattling or shifting.
Ordered a new bracket for the heating element because of all the melted plastic on it. Also ordered a new lower washer arm. Both came quickly and the lower arm I can no longer get from the manufacturer. Both installed quickly and worked like there was never anything wrong. Saved me a lot of money and didn’t have to replace the dishwasher. Will order from here anytime I need to replace parts for any of my appliances. Read more
Replaces missing, torn, or saturated sound-dampening insulation blanket for dishwashers. Wraps around tub to reduce noise and protect cabinetry.
The jacket was old and damaged. Replaced it with a new one. Used the video by AppliancePartsPros which made it very easy. Thanks. Read more
Set of 8 screws and washers.
Dishwasher worked fine except the top rack would keep coming off the rails, could see the rollers needed replacement. Washer is 10 years old, and in that time the rollers had become brittle and broken. At first tried to use old screw and washer, but washer was impossible to remove from screw as I have hard water and the calcium deposits seemingly cemented it. Order this screw and washer set and within 5 minutes of getting easily replaced the old rollers. The video was very helpful, as was the... Read more
Guides the door balance cable in your dishwasher's hinge system. Replace if cracked, broken, or causing squeaking when opening the door.
Easy fix, just pull out dishwasher a little for side access. Just make sure you get left & right pulley's. And change both while you're there. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.