Fpid2495qfoa Parts

Replacement sensor assembly that detects appliance operating conditions and sends readings to the control system for proper operation. Installing a working sensor restores reliable feedback and helps resolve related error codes or inconsistent performance. What it does:

• Detects operating conditions and provides electrical feedback to the appliance control.
• Enables the control board to monitor and adjust cycles based on measured readings.
• Faulty or intermittent sensors can cause incorrect readings, error codes, or unstable/incorrect appliance operation.
• Replacing a failed sensor restores accurate sensing and helps return the appliance to normal function.

• Always disconnect power to the appliance before starting work to avoid shock or injury.
• Handle the sensor and wiring gently; avoid pulling on wires or bending sensor probes sharply.
• Ensure connectors are fully seated and routed clear of moving parts or heat sources.
• After installation, restore power and verify proper operation and that any previous error codes are cleared.

This flexible hose routes water between internal components, helping maintain proper flow and leak-free operation. Replacing a worn or cracked hose restores reliable performance and helps prevent water damage inside or beneath the appliance. What it does

• Carries water between components for filling, circulation, or draining
• Maintains a sealed path to prevent leaks when intact
• Deterioration (cracks, hardness) or kinks can restrict flow
• Common symptoms: water leaking, standing water, slow/no drain or fill, moisture odors

• Includes: 1 hose

• Disconnect power and turn off water supply before service
• Place towels or a pan to catch residual water during removal
• Note the original routing and transfer any clamps/seals; replace if worn
• Push hose fully onto fittings, route to avoid kinks, and test for leaks after reassembly

Flapper seals the appliance drain/valve to prevent leaks and ensure proper water flow. Replacing a worn or damaged flapper restores reliable sealing, reduces dripping, and helps the appliance drain correctly. What it does:

• Seals the drain/valve opening to stop water leaks
• Opens and closes to allow normal draining during cycles
• Restores a watertight seal when the original flapper is cracked, torn, or warped
• Can resolve slow draining, intermittent leaks, or pooling at the base

• Disconnect power and shut off the water supply before starting any repair
• Handle the part carefully; avoid stretching or nicking sealing surfaces
• Clean the mating surfaces and follow the appliance's service manual for removal/installation

This fixing clamp secures small components to the appliance frame to reduce movement and rattling. Replacing a worn or missing clamp helps keep hoses, wiring and trim properly held for quieter, safer operation. What it does:

• Secures hoses, wiring, panels or small parts to a mounting point to prevent shifting
• Reduces vibration and rattling caused by loose or damaged fasteners
• Keeps components aligned to help avoid chafing or accidental disconnection
• Use when the original clamp is cracked, broken, bent, or missing

• Always disconnect power (and water, if applicable) before servicing the appliance
• Access often requires removing trim or a cover; common hand tools include screwdrivers and pliers
• Ensure the clamp fully seats around the component and engages the mounting feature or fastener
• Inspect adjacent wiring, hoses and mounting surfaces for damage and replace any compromised parts

This is a replacement lower spray arm for dishwashers. It rotates to direct pressurized water across dishes, restoring proper spray coverage and improving cleaning performance. What it does:

• Delivers rotating, pressurized water to rinse and clean lower-rack dishes
• Replaces worn, cracked, or clogged spray arms that reduce washing effectiveness
• Helps stop symptoms like poor cleaning, leftover food on plates, or uneven wash cycles
• Works with existing spray arm hub and fastener when undamaged

• One lower spray arm

• Disconnect power and water supply to the dishwasher before servicing
• Remove lower rack and inspect hub/fastener for damage before installing the new arm
• Install and secure the spray arm per your dishwasher's service instructions; ensure it spins freely
• Run a short wash cycle to verify proper rotation and that no leaks or unusual noises occur

This spray arm circulates pressurized water to clean dishes by directing spray across the rack. Replacing a damaged or clogged spray arm restores proper water distribution for more consistent wash performance. What it does:

• Rotates and delivers water to clean dishes and glassware during wash cycles
• Helps maintain even coverage across the dishwasher rack for better cleaning
• Can cause poor wash results, visible spots, or debris left on dishes when cracked or clogged
• Worn or broken spray arms may rattle or fail to rotate during operation

• One spray arm

• Disconnect power and water supply before beginning any repair
• Remove the lower and/or upper rack as needed to access and replace the spray arm
• Inspect mounting hub and seals; replace any worn clips or gaskets per manufacturer guidance
• Test a short cycle after installation to confirm rotation and proper spray pattern

This O-ring is a small rubber sealing ring that restores a watertight seal at a connection point to help stop leaks and prevent water damage. It's a simple, low-cost part used where two parts meet. What it does

• Seals joints to prevent water leaks at valve, hose or fitting connections
• Stops dripping or pooling caused by a damaged or worn seal
• Helps maintain proper flow and pressure by keeping connections tight
• Works wherever the OEM specifies this exact O-ring size and shape

• Disconnect power and shut off the water supply before servicing
• Replace only with the exact O-ring size specified by the OEM for a proper seal
• Inspect mating surfaces and clean debris before installing the new O-ring
• Lubricate with a small amount of food-grade silicone lubricant if OEM guidance recommends it; avoid petroleum-based lubricants on rubber seals

The Tubing is an OEM part for Frigidaire dishwashers. As a key component of the spray arm assembly, the tubing works to distribute water throughout the dish rack during wash and rinse cycles. 

Causes of bad tubing can include mineral or limescale buildup reducing water pressure over time. Cracks or kinks from constant bending also jeopardize tubing integrity.

Symptoms of damaged tubing include:

• Poor or uneven spray pattern across the dish rack
• Reduced water pressure noticed during cycles  
• Leaks at tubing connections

Replacing the tubing restores the proper water flow needed for thorough cleaning. This OEM Frigidaire part replaces both the tubing segment and needed clamps/fasteners for hassle-free installation. It is also compatible with dishwasher models by Westinghouse, Crosley, and KitchenAid.

This replacement duct directs internal airflow to ensure proper ventilation and temperature balance inside the appliance. Restores designed air routing to help prevent overheating, poor circulation, or uneven cooling. What it does:

• Channels airflow between components to maintain consistent operating temperatures.
• Helps reduce abnormal noise or vibration caused by disrupted air paths.
• Prevents hot or cold spots that can lead to performance issues.
• Supports proper ventilation for motors, compressors or heating elements.

• Disconnect power (and water if applicable) before starting any repair.
• Access may require removing exterior or interior panels; keep fasteners organized.
• Check orientation and sealing surfaces for proper fit; replace any damaged clips or gaskets.
• Wear gloves to protect hands from sharp sheet-metal edges and follow all manufacturer safety instructions.

This door latch secures the appliance door in the closed position to help maintain proper sealing and operation. It replaces a worn or broken latch so the door stays shut reliably during use. What it does:

• Secures the appliance door to prevent accidental opening during cycles or when moving the appliance
• Helps maintain an effective door seal to support proper temperature control and operation
• Stops common symptoms like a door that won't stay closed or that pops open unexpectedly
• Functions as the mechanical catch that engages with the strike or frame when the door is closed

• One replacement latch

• Disconnect power to the appliance before beginning any repair
• Basic hand tools are typically required; remove trim or access panel if necessary to reach the latch
• Handle small plastic components carefully to avoid breaking tabs or mounting points
• Verify correct latch orientation and engagement with the door strike before reassembling

The NUT is an OEM component specifically designed for Frigidaire dishwashers. This nut plays a vital role in maintaining stability and secure positioning of internal dishwasher components. 

Symptoms of a bad nut include movement or wobbling of interior dishwasher parts, odd noises emanating from within the unit, or leaks developing around improperly positioned or tightened components.

Causes of a bad nut can include wear and tear over time, damage from excess strain on connectors and joints, or improper installation during assembly. 

Some symptoms of a bad nut include:

• Vibration or shaking of internal parts 
• Loose interior panels or assemblies
• Difficulty latching or securing the dishwasher door
• Water leaks into areas not designed for moisture

This OEM Frigidaire replacement part is compatible with Electrolux, Gibson, Kelvinator, and select Kenmore models. 

This is a small mounting clip used to secure panels and trim on compatible Frigidaire appliances, helping keep exterior parts aligned and stable. Replaces a worn or broken clip to reduce rattling and loose panels. What it does:

• Secures trim, panels or small components to the appliance frame
• Prevents movement that can cause rattling, gaps or misaligned panels
• Replaces clips that are cracked, bent or missing, restoring proper fit
• Designed for a discreet, low-profile hold without affecting appearance

• Turn off and unplug the appliance (or shut off power) before accessing panels
• Remove surrounding trim or screws as needed to reach the clip location
• Press or snap the clip into place; use care to avoid cracking plastic parts

These side strips are exterior cabinet trim pieces that restore a finished look and protect the refrigerator cabinet edges. They replace damaged, loose, or missing side trim to improve appearance and help keep edges covered. What it does:

• Covers and protects the vertical cabinet edges from chips, dings, and everyday wear
• Conceals gaps between the cabinet and the door or liner for a neater appearance
• Replaces cracked, warped, or missing trim that can make the appliance look worn
• Helps maintain a continuous exterior finish along the refrigerator sides

• Service-friendly trim; typically snaps or screws into place—inspect fasteners before removal
• Remove damaged strips carefully to avoid scratching the cabinet; use appropriate trim tools if needed
• Keep work area clear and support panels during installation to prevent drops or damage
• If working near electrical components, unplug the appliance or turn off power at the breaker

This replacement rail restores smooth sliding and support for a drawer or shelf assembly, helping the component open and close reliably. Use when a worn or damaged rail causes sticking, misalignment, or instability. What it does

• Provides a guided track for a drawer or shelf to slide in and out
• Replaces bent, cracked, or worn rail surfaces that cause sticking or catching
• Helps eliminate wobbling, uneven travel, or a drawer that falls out of the track
• Restores proper alignment so the drawer or shelf seats and locks correctly

• One replacement rail

• Disconnect power to the appliance and remove contents before servicing
• Remove the drawer or shelf to access mounting fasteners
• Use basic hand tools; keep track of clips and screws for reassembly
• Inspect the opposite rail/sides; replace matching components if worn for best performance

This replacement leveling foot provides a stable, height-adjustable support for your appliance so it sits level and reduces rocking. It restores proper alignment for smooth door operation and even weight distribution. What it does:

• Replaces a worn or damaged support foot to stop rocking and improve stability
• Allows small height adjustments to level the appliance on uneven floors
• Helps maintain proper door closure and reduce vibration noise
• Fits under the appliance cabinet and bears operational weight

• One leveling foot

• Unplug the appliance or disconnect power before working underneath it
• Use a helper or an appliance dolly to safely raise and support the unit while replacing the foot
• Thread the foot into the mounting bracket or cabinet insert until it contacts the floor, then adjust as needed