Frfs2831as1 Parts

This hinge assembly supports and lets your refrigerator door pivot smoothly, restoring proper alignment and reliable closing. It replaces a worn, bent, or broken hinge to reduce door sag, rubbing, or noisy operation. What it does:

• Provides the pivot point for the refrigerator door so it opens and closes correctly
• Restores proper door alignment to help seals meet the cabinet and maintain a tight closure
• Stops or reduces door sag, scraping, and uneven gaps
• Eliminates clicking or grinding noises caused by a damaged hinge

• Unplug the appliance and remove food and shelves as needed before starting
• Support the door while removing and installing the hinge to prevent damage or injury
• Use the correct tools and follow OEM alignment steps; tighten fasteners securely but do not overtighten

This hinge assembly secures and guides the refrigerator door so it opens and closes smoothly. Replacing a worn or damaged hinge restores proper door alignment and helps the seal engage for better cooling performance. What it does:

• Supports the refrigerator door and keeps it aligned on the cabinet
• Guides smooth opening and closing to prevent sagging or binding
• Helps maintain a consistent door seal to reduce air leaks
• Stops excessive noise or scraping caused by worn hinge components

• One hinge assembly

• Unplug the appliance and empty or support the door before starting
• Use proper tools and follow manufacturer instructions; a second person may be needed to hold the door
• Inspect surrounding mounting points and hardware; replace any stripped screws or damaged brackets

This cover assembly protects internal components and restores the appliance's exterior appearance. It provides a secure housing that helps keep wiring and mechanisms shielded from debris and accidental contact. What it does:

• Shields internal components and wiring from dust, moisture, and incidental contact
• Restores a finished appearance when a damaged or missing cover causes gaps or exposed parts
• Helps reduce rattling or vibration caused by loose or broken covers
• Supports proper airflow paths when required by the appliance design

• One cover assembly as shown

• Disconnect power (and water if applicable) before beginning any service
• Use basic hand tools; remove adjacent panels or trim as needed for access
• Handle carefully to avoid scratching the finish; align tabs and fasteners before tightening
• Replace damaged clips or screws to ensure a secure fit

This dispenser wiring harness connects the dispenser controls and components in the refrigerator door, restoring electrical continuity for the dispenser functions and simplifying replacement of a damaged or faulty harness. What it does:

• Carries power and signals between the dispenser switches, valve/solenoid, and indicator lights
• Replaces frayed, pinched, or damaged wiring that can cause intermittent or no dispenser operation
• Addresses symptoms like non-working water/ice dispenser, no dispenser lights, or unresponsive dispenser switches
• Provides factory-style connectors for a direct, plug-and-play replacement

• One dispenser wiring harness

• Disconnect power to the appliance before beginning any work to avoid shock
• Remove the inner door panel or dispenser bezel per your model's service instructions to access the harness
• Match connectors and routing to the original harness; avoid stretching or pinching wires when reinstalling
• Test dispenser functions after installation and reassemble panels securely

This complete door assembly replaces a damaged or dented appliance door to restore appearance and function. It provides the outer panel and inner liner needed for a factory-style door replacement. What it does:

• Replaces a bent, dented, or cracked door panel to restore a flush, finished exterior
• Restores the inner liner and mounting surfaces for secure hinge and latch alignment
• Helps re-establish proper sealing and insulation where door damage causes gaps or drafts
• Stops cosmetic issues like chipped paint or visible impact damage from worsening

• Designed to install using the appliance's original hinges and fasteners; refer to the service manual for disassembly/reassembly steps
• Disconnect power and remove contents from the appliance before starting work
• Handle the door carefully to avoid damage to the finish and to protect internal liners and wiring
• If hinge hardware, gaskets, or fasteners are damaged, replace them separately.

This mullion assembly is the vertical center trim that attaches between refrigerator doors to improve appearance and help direct the door seal for proper closing. It replaces a damaged, cracked or missing mullion and restores the door interface. What it does

• Covers the gap between French/side-by-side style doors and provides a finished center trim.
• Helps align and protect the door edges where seals meet to maintain a tighter door interface.
• Restores appearance by replacing cracked, broken or discolored mullion trim.
• Can reduce drafts or light entering between doors when the original mullion is damaged.

• One mullion assembly as shown

• Disconnect power to the appliance and remove interior items from the top shelf/door area before starting.
• Installation typically requires removing door trim or screws along the mullion—handle door panels carefully to avoid damage.
• Keep original fasteners; replace only the components shown. If mounting hardware is missing, obtain exact fasteners before installing.

This replacement door bin is a clear plastic shelf that mounts inside the refrigerator door to keep bottles, condiments and small containers organized and secure. Restores lost storage and helps prevent items from falling when the door opens. What it does

• Provides a sturdy shelf for holding bottles, jars and small food containers on the door interior.
• Replaces cracked, broken or missing door storage that no longer secures items.
• Helps keep frequently used items accessible and organized in the door.
• Fits into the door retainer rails or mounting points to lock the shelf in place.

• One refrigerator door bin.

• Remove all items from the door and work with a clear workspace before installing.
• Align the bin with the door mounting rails or clips and press into place until it engages.
• If the bin is damaged by mounting hardware, inspect and replace any broken clips or retainers as needed.
• Wear gloves to avoid cuts from sharp edges on damaged parts and dispose of broken pieces safely.

This replacement cover protects internal components and restores the appliance's finished appearance. It fits over the designated housing area to shield wiring and parts from dust and accidental contact. What it does:

• Encloses and protects internal components from debris and light contact
• Restores a clean, finished look to the appliance exterior
• Helps maintain proper airflow pathways where applicable
• Prevents direct contact with wiring or controls behind the opening

• One replacement cover as shown

• Disconnect power (unplug or shut off breaker) before starting any work
• Use basic hand tools to remove fasteners; keep hardware for reassembly unless new hardware is supplied
• Handle part carefully to avoid scratching or cracking plastic trim

This replacement tube routes water inside the refrigerator to the dispenser or ice maker, helping restore proper water flow and prevent leaks. It's a direct-fit replacement when the original tube is cracked, pinched, or clogged. What it does

• Directs water from the inlet to the dispenser or ice maker so the system can deliver water and ice.
• Prevents leaks caused by damaged, split, or kinked tubing.
• Restores normal water flow when old tubing is clogged or collapsed.
• Works as an internal fluid pathway; not an electrical component.

• One replacement tube as shown.

• Turn off water supply and unplug the appliance before starting to avoid flooding and electrical shock.
• Inspect fittings and clamps during replacement; replace any damaged hardware for a secure seal.
• Route the tube along the original path and avoid sharp bends or kinks that can restrict flow.

This defrost pan collects and channels water from the refrigerator's defrost cycle to the drain, preventing leaks and water pooling beneath the appliance. Durable plastic designed to fit underneath the freezer/evaporator area. What it does:

• Catches meltwater from the evaporator during defrost cycles to prevent leakage under the cabinet
• Guides water toward the drain tube so it can evaporate safely
• Helps avoid standing water and related odors or damage
• Fits into the refrigerator base where the original drip tray is located

• One defrost pan/drip tray

• Disconnect power to the appliance before servicing to avoid shock
• Remove lower access panels or kick plate to reach the old pan; be careful of sharp edges
• Position new pan under the evaporator/drain area and drain tube alignment
• If you find excessive frost or frequent water, inspect the drain tube and defrost system for root causes