Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Refrigerator making grinding or loud noises? This condenser fan motor assembly fixes failed bearings and wobbling shafts. Moderate DIY difficulty.
Replacement fan assembly with motor Read more
Fixes heavy frost buildup on evaporator coils and warm fresh food compartment. Clips onto evaporator assembly. Straightforward DIY with video guide.
The defrost heater element looked good and had continuity. The defrost thermostats checked good, so that just left the Defrost Module as the likely suspect. I installed a new defrost control module and thermostats. The thermostats were inexpensive and the old ones could have been intermittent, The only "tricky" part was finding out how to get to the back screw that holds the main control panel. Discovered that the return air duct surrounding the control panel needed to come off. It helps... Read more
The Light Socket is an OEM part for GE refrigerators. It is responsible for holding the refrigerator's light bulb and ensuring it receives power to illuminate the interior when the door is opened.
You should replace the light socket if it becomes faulty. Causes of a bad light socket can include wear and tear from regular use, electrical issues such as short circuits or power surges, and corrosion from moisture exposure.
Symptoms of a bad light socket include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
I researched the model and watched a YouTube video on the repair. I ordered the part. Two days later it arrived and I made the repair. I'm all thumbs in home repairs, but had it done in 5 minutes. My husband was surprised. Nice that I can take care of a few simple repairs around the house. Read more
The Lid Bumper is an OEM part for GE refrigerators. It is designed to provide cushioning and protection for the refrigerator lid, preventing damage and ensuring smooth, quiet closing.
Causes of a bad Lid Bumper can include deterioration over time due to frequent use, exposure to temperature variations, or damage from accidental impacts. A worn or damaged bumper may no longer provide adequate cushioning, leading to potential damage to the lid or the refrigerator itself.
Symptoms of a bad Lid Bumper include:
Changed fan motor, rubber grommets, and dust cover. It sounded like the vibrating sound was being caused by the motor. But, come to find out I had a chipped blade on one of the fan blades. So make sure and check the fan blade first. Thanks Appliance Parts Pros everything for just as it should. Read more
The Snack Pan is an OEM component specifically designed for GE refrigerators. This snack pan is located in the refrigerator and provides a convenient storage space for frequently accessed items like snacks, condiments, or beverages.
Causes of a bad snack pan include fading or discoloration of finishes, scratches or dents in the surface, and cracks or breaks in the material.
Symptoms of a bad snack pan include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
My husband unscrewed the broken railing and slipped in the new railing and screwed it in place. The new snack drawer was then sled in. The screw they provided was tight but after twisting it a few times went into the railing hole fine. Read more
Freezer door gasket creates an airtight seal to keep cold air in and warm air out. Replace if torn, cracked, or not sealing properly. Confirm fit.
Stainless steel refrigerator door handle set includes both freezer and refrigerator handles with mounting hardware. Replaces broken, cracked, or damaged handles.
Just ordered both handles and installed it myself Read more
Clear snap-in dairy door bin for refrigerator compartments. Replace if cracked, broken, or missing to organize and separate dairy items in door storage.
Easy fix Read more
Door shelf bar secures to the refrigerator door liner to hold condiments and small items. Replace if cracked, broken, or if retaining clips are damaged.
I replaced the door seal. This can be challenging because of the way it's folded when it's shipped and it has to expand in places. It was a straightforward process. I used hot water and a blow dryer and the door seals fine. As far as replacing the support for the snack pan its a 5-minute fix and put the retainers in on the door shelves is simple as well Read more
The Set Screw is an OEM part for GE refrigerators. The set screw fits into the handle assembly, ensuring a tight and stable connection to the refrigerator door. This set screw is essential for preventing the door handle from becoming loose or coming off, which can affect the ease of opening and closing the refrigerator door.
Causes of a malfunctioning Set Screw can vary. Normal wear and tear is a common issue, causing the screw to strip or loosen over time. Incorrect installation is another factor.
Symptoms of a bad Set Screw include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
I ordered the replacement handle parts based on the model number. Read more
Bottom hinge pin secures the refrigerator door at the base, allowing smooth opening and closing. Replace if worn, damaged, missing, or door sags.
Replaced Hinge bracket, Hinge pin, and spacers, Read more
Mounting hardware kit that secures refrigerator or freezer door handles. Restores solid grip when original fasteners are missing, damaged, or stripped.
Mounts the evaporator fan assembly inside the freezer compartment. Replace if cracked, broken, or damaged from repeated fan motion or temperature stress.
WE REPLACED THE FAN MOTOR, FAN, MOUNTING BRACKETS, AND GROMMETS. Read more
Small washer that fits on refrigerator door hinges to distribute weight and reduce friction. Replace if worn, cracked, or missing to restore proper alignment.
New Door Handle and the plastic spacers Read more
Secure refrigerator panels, handles, shelves, and internal components with this mounting screw. Replace worn, stripped, or missing screws easily.
Replacement freezer door shelf support bar for refrigerators. Holds door bins and shelves in place. Replace if cracked, broken, or warped plastic causes shelving to sag.