Frigidaire Gltf2940fs1 Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 134409320
This is the complete detergent dispenser drawer assembly for a front-load or top-load washing machine. It holds and dispenses detergent, fabric softener, and bleach at the appropriate times during the wash cycle. Replace this assembly if the dispenser drawer is cracked, if detergent is not dispensing properly, or if residue builds up and cannot be cleaned out.
Do-It-Yourself Stories from Customers like You
Would not go through rinse cycle Donald S. • Cloudcroft , NM • July 31, 2015
Replaced the water valve assembly. did not really need the dispenser part. problem mainly caused by hard water buildup where the hose connects. also replaced the hoses as they also had some hard water buildup.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137089000
Washer air chamber connects the water level pressure switch to the tub. Replace if cracked, kinked, or disconnected causing water level issues.
Do-It-Yourself Stories from Customers like You
The washing machine wouldn't drain error code23 came up Alan R. • Portage , WI • September 22, 2015
Checked manual for error code possible malfunctions. I chose the suggestion that sounded plausible talked to Brent and ordered parts.. The parts were at my door the next morning. Service was professional and fast! Thanks ApplianceParts Pros !!!!
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134363200
Mounting bracket secures components inside your laundry center. Replace if bent, broken, or missing to eliminate rattling and restore stability.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134178901
Metal sheet-metal screw secures panels, brackets, and internal components. Replace when missing, stripped, or damaged to restore proper fit.
Do-It-Yourself Stories from Customers like You
I needed parts to put it back together Christopher M. • Hampton , VA • February 17, 2015
My washer and dryer was stacked and I needed the right parts to put the tops and "feet" back on them.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131202300
Phillips pan head screw for securing panels and components in appliances. Replace missing, stripped, or corroded screws during repairs or maintenance.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131276900
This is a Belleville-style spring steel washer used in the suspension or counterweight mounting system of a washing machine. It acts as a spacer and provides spring tension to help absorb vibration during the spin cycle. Replace this washer if the machine vibrates excessively, makes banging noises, or if the original washer is flattened, cracked, or missing.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131303900
Hex washer head screw secures panels, brackets, and drum assemblies in washers. Replace rusted, stripped, or missing screws to prevent rattling.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134156200
Mounting screw secures panels, trim, or brackets in dryers, washers, and ranges. Replace lost, stripped, or corroded screws to restore stability.
Do-It-Yourself Stories from Customers like You
The washer door hinges had rusted Sunia P. • Orlando , FL • March 15, 2019
We replaced the hinges and screws with new parts. The door works now.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134641100
Replacement mounting bracket that secures washer panels and components. Needed when original bracket is cracked, broken, or missing, causing loose or misaligned parts.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131303500
Secures the motor housing to its mounting bracket in washers and laundry centers. Replace if screw is missing, stripped, or damaged during service.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137361500
This replacement screw fastens panels, brackets, and internal components so assemblies stay aligned and tight during operation. With an 8-18 thread and 0.711-inch length, it matches the original hardware for a precise, reliable hold.
- Secures panels, brackets, and internal components to the cabinet/frame
- Replaces missing, stripped, or corroded screws
- Helps reduce vibration, rattling, and gaps from loose hardware
- Restores proper alignment after service or transport
Install notes:
- Disconnect power and shut off water/gas before servicing.
- Support panels/components while removing and installing the screw.
- Start threads by hand to avoid cross-threading; tighten snugly—do not overtighten.
Do-It-Yourself Stories from Customers like You
Replace washing meachine door hinge ( 2 ) Darryl J. • Lake Charles , LA • December 16, 2014
Replaced rusty/ broken washing machine door hinges.
This unit is about 10yrs. old now and is so happy to save money by not having to replace this unit.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137371700
This is the top work surface panel that covers the upper portion of the dryer cabinet. It provides structural support and a finished exterior surface while protecting internal components from dust and debris. Replace this panel if it is dented, cracked, rusted, or if the finish is damaged.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131793303
Replacement bolt fastener for securing washer panels, brackets, and assemblies. Needed when original bolt is missing, loose, or stripped causing rattling.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134160900
Genuine Frigidaire part
By: Frigidaire
Part Number: 134261300
Secures interior trim and components in your laundry center to prevent rattling and shifting. Replace when worn or broken to restore a snug fit. Verify compatibility with your model number.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134362000
This is the front half of the outer tub that encloses the wash drum and holds water during the wash and rinse cycles. It forms a watertight seal with the rear tub half and includes the opening where the door boot seal attaches. Replace this assembly if the tub is cracked, leaking water onto the floor, or if the drum bearing seat is worn out and causing excessive noise during the spin cycle.
Do-It-Yourself Stories from Customers like You
The front bowl (shell) crack at edge where the belly spring installed Phu T. • Frisco , TX • January 02, 2016
Take belly spring off , take the door off ,top panel off , Control panel off, took weight balance, took belly off ,take old shell of by remove all fastener around shell ,Then install new shell.then put all parts back in reverse order .I have to took the drain rubber off too.
Read more
More