Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice won't dispense or grinds loudly? A bent or worn crusher blade is often the culprit. This blade fits inside the ice bucket assembly. Easy DIY fix.
I ordered (3) new replacement blades and received them in two days! Read more
Fix refrigerator lights that won't turn on when door opens. This door light switch is a simple snap-in replacement. Easy 10-minute DIY repair.
Switch replacement was easy: -unplug fridge -using medium flathead, pry out old switch, starting from back, be gentle it's all plastic -when switch pops out, grab the wires and don't let them fall back into hold -there should be three wires -connect to new switch in same pattern -push new switch back in, being careful to orient it correctly while replacing the freezer switch, i noticed that one of the wires had loosened up and detacted from the old switch anyway, which was probably the actual... Read more
Collects water from evaporator defrost cycles. Mounts near compressor under refrigerator. Replace if cracked, leaking, or damaged to prevent odors.
Previously, I removed the lower rear cardboard back of the unit and saw the crack in the defrost pan. It was probably damaged when unit was moved using appliance hand truck. I looked up the part number AP4319611 in the exploded view diagrams of the unit. The part was ordered and delivered in a few short days. Emptied the unit and removed all shelves/glass to avoid damage since the unit must be tilted enough to reach under and remove two 1/4 inch hex screws. Tilted to the right side (facing... Read more
The Frigidaire Touch-Up Paint is white in color in a .6 fl oz bottle. For almond order 5303321320. For black order 5303321321.
The Touch Up Paint is an OEM part for Frigidaire appliances. Whether you're dealing with scratches, chips, or other minor cosmetic damage, this touch-up paint provides an easy and effective solution for maintaining the appearance of your appliance. It's designed to adhere well to metal surfaces, offering durability and resistance to further wear and tear.
Over time, appliances can accumulate minor surface damage from regular use, cleaning, and accidental impacts. Using the Touch Up Paint not only improves the aesthetic appeal of your appliance but also helps protect exposed areas from rust and corrosion, which can extend the life of the appliance.
Symptoms of needing Touch Up Paint include:
Quick touch up. The paint worked great. Packaged with a brush like nail poliish Read more
Secures the crisper slide rail to the refrigerator liner for smooth drawer operation. Replace if broken or missing to restore proper alignment and support.
Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.
I ordered online to AppliancePartPros.com for the fridge door hinge and after quick delivery I spent 15 minutes to securely fit the door back on the frig. I'm sure to do business again for parts if needed. Read more
Ice dispenser not working but ice is in the bin? The auger motor rotates the auger to feed ice through the chute. DIY-friendly repair in under an hour.
Replaced motor and new solenoid and yoke assembly, motor ran fine but Ice maker did not make Ice, water was turned on and the wire off and on latch was is the down position (on). Disconnected the water line from the Ice maker tray, ice had formed in the line while I was waiting for my parts (about 5 days), I would suggest disconnecting the water line at the feed end were your shut off valve is located and allow water to drain out of line. I had to remove Ice tray and submerge it pan of hot... Read more
Ice maker clicking or not producing ice? A worn drive gear with stripped teeth is often the cause. This 5-minute fix restores normal ice production.
Replaced the gear. Now it's making ice again. Perfect. Read more
Ice won't dispense or jams in crushed mode? This crusher blade fixes bent or broken blades in your ice bucket assembly. Easy DIY repair with video guide.
Supports and guides the refrigerator door as it pivots, reducing friction. Replace if cracked, worn, or causing metal shavings to restore smooth operation.
Discovered that the old part had broken, preventing the door from leveraging closed into the bearing valley. Metal-on-metal rubbing was also a clue. Pulled the old piece out of the hole (only the shaft remained) and popped in the new bearing. Took all of 10 minutes, and everything works great now. Read more
Loud noise or grinding from freezer? This evaporator fan motor circulates cold air in your refrigerator. Moderately easy DIY repair with basic tools.
REPLACED THE FREEZER EVAPORATOR MOTOR. PART WAS CORRECT ONE AND FIT GREAT! Read more
Fix ice maker overfilling, water spillage, or no ice production. Includes cover, fill cup, bail arm, and harness. Easy 5-10 minute DIY install.
Checked the internet to see what the recommended fix was based upon my model # and the problem I was having. I eventually ended up at the appliance parts pros websites video showing how to remove the ice maker and change it out with a new one. The appliance parts pros video was extremely helpful in the repair process! When I contacted appliance parts pros via chat on their website they quickly confirmed that this part would fit my model. So I ordered the replacement ice maker and kept my... Read more
Fix water or ice dispenser not working with this 4-button control switch assembly. Common fix when buttons fail to respond or dispense incorrectly.
Replaced the four-button switch assembly. Read more
Hinge component that guides the cam for self-closing door action. Replace if cracked, broken, or worn to restore smooth door swing and proper alignment.
Ordered new bearing hinge and door closer plate. Read more
Secures panels, brackets, and handles in refrigerators and other appliances. Replace missing or stripped screws to restore secure mounting.
Ordered the screws needed from your website and put the doors back on the frig. Read more
This turntable roller assembly sits under the glass tray to support and guide it as it rotates. Replacing a worn or damaged ring helps restore smooth tray movement for more even heating and dependable microwave performance.