Gcfg3060bf Parts

This replacement cap covers and protects a small opening or fastener on your appliance. It restores a clean, finished appearance and helps keep out dust and moisture when the original cap is missing or damaged. What it does:

• Covers a screw hole or open end as designed on the unit
• Helps block debris and moisture and can reduce rattles
• Maintains a clean, finished look and protects underlying hardware
• Replace if the original cap is cracked, loose, deformed, or missing

• 1 cap

• Disconnect power and allow any hot surfaces to cool before servicing
• Use a non-marring tool to gently remove the old cap to avoid scratching
• Align and press/snap the new cap into place; do not force
• If the cap conceals a fastener, the fastener is secure before reinstalling the cap

This flat wire oven rack sits on the interior supports to hold cookware at the correct height. Replace a bent, rusted, or missing rack to restore a stable, level surface for safe, even baking and roasting.

• Provides a level platform for pans, bakeware, and dishes inside the oven cavity
• Enables accurate shelf positioning to follow recipe and cooking instructions
• Replace if the rack is warped, rusted, has broken welds, or no longer sits level
• Symptom clues: cookware wobbles, tips, or cannot be positioned properly on the supports

• Disconnect power and allow the appliance to cool completely before handling interior parts
• Wear gloves; wire ends and edges can be sharp
• Match the rack orientation to the support ledges and seat it fully on both sides
• Confirm the rack is level and securely seated before loading cookware

This replacement cap covers and protects its designated opening or fastener on your appliance. It restores a clean, finished look and helps shield internal areas from dust and wear when the original cap is missing or damaged. What it does:

• Covers a specific opening, fastener, or trim end to protect the area
• Helps keep moisture, grease, and debris out of the assembly
• Restores proper fit and finished appearance
• Typical symptoms include a cracked, loose, discolored, or missing cap

• 1 cap

• Disconnect power and, if applicable, shut off gas/water before servicing
• Note the cap's orientation; gently unclip, pry, or unthread the original per model design
• Seat the new cap fully and avoid forcing or overtightening
• The cap is secure and does not interfere with moving parts

This small replacement spacer positions and secures appliance components to maintain correct alignment and fit. Installing the spacer restores proper panel spacing and reduces vibration where a worn or missing spacer causes looseness or rubbing. What it does:

• Maintains the correct gap between panels, trim, or assemblies to ensure parts fit flush
• Keeps components aligned to prevent rubbing, binding, or uneven wear
• Helps reduce vibration and rattling caused by a missing or damaged spacer
• Preserves original part spacing for reliable operation of the surrounding components

• Disconnect power to the appliance before any service to avoid shock or injury
• Remove any trim or fasteners that block access; keep track of screws and small parts
• Match the new spacer's orientation to the original; do not force parts into place

Main electronic control board that manages refrigerator functions like temperature regulation and defrost cycles. Replacing a failed board restores responsive controls and can resolve cooling, display, or cycle problems. What it does:

• Regulates compressor, fan, defrost heater and sensor signals to manage temperature and cycle timing.
• Interprets user inputs and runs the display/touchpad interface.
• A faulty board may cause no cooling, incorrect temperatures, constant running, or an unresponsive control display.
• Works with existing wiring harnesses and sensors to coordinate system operation.

• Disconnect power at the wall or breaker before attempting service.
• Handle the board by edges and avoid static discharge; use anti-static precautions where possible.
• Match the replacement board part number to the original before installing.

Replacement snap-on cap that restores a finished appearance and helps protect underlying components from dirt and accidental contact. Fits original mounting locations to cover exposed hardware and improve appliance safety and aesthetics. What it does:

• Covers and protects exposed hardware, terminals or posts to reduce debris buildup and accidental contact.
• Restores a clean, finished look to panels, trim or appliance edges.
• Helps reduce rattling or vibration noise caused by missing trim pieces.
• Use when the original cap is cracked, broken, missing or when exposed fasteners are visible.

• Always disconnect power (and water, if applicable) before attempting any repair.
• Remove the damaged cap by hand or with a small pry tool; press the replacement cap onto the mounting post until fully seated.
• Avoid excessive force during removal/installation to prevent damage to the mounting post or surrounding trim.
• If mounting posts or clips are damaged, replace those components to ensure a secure fit.

This anti-tip kit secures a freestanding range or slide-in oven to help prevent the appliance from tipping forward, improving safety during normal use. Installs at the appliance base to anchor the unit to the floor or wall. What it does:

• Anchors the range to the floor or wall to reduce the risk of tip-over when the oven door or storage drawer is opened.
• Stops the appliance from rocking or shifting during normal use or when heavy cookware is placed on the open door.
• Provides a simple mechanical safety anchor recommended after installation, floor changes, or appliance relocation.

• Anti-tip bracket and mounting hardware.

• Follow the OEM installation instructions exactly; mount to the floor or wall surface specified by the manufacturer.
• Use proper anchors for your floor or wall type (masonry anchors or wood screws as appropriate); if the provided fasteners are not suitable, obtain the correct anchors.
• Disconnect power and move the appliance per OEM guidance before attaching the bracket.

This ignitor/orifice assembly sits at the surface burner and provides both the ignition spark and metered gas flow for clean, reliable light-off. Replace it to restore quick starts and consistent flame quality. What it does:

• Provides the ignition spark at the burner via the electrode
• Meters gas through the fixed orifice to set proper flame size
• Wear, cracks, or blockage here can cause clicking with no flame or a burner that won't light without a match
• A damaged or restricted orifice may lead to small, uneven, or yellow flames

• Disconnect electrical power and shut off the gas supply before servicing
• Allow the cooktop to cool; handle the ceramic electrode carefully to avoid damage
• Transfer any burner-specific hardware as needed and secure the spark lead connection
• After reassembly, restore gas and check all joints for leaks with a soapy-water solution; verify proper spark and flame

This is a replacement mounting screw used to secure panels and components in compatible Frigidaire appliances. It restores proper fit and helps prevent rattles, loose panels, and parts that shift during operation. What it does:

• Fastens trim, panels, brackets, or controls to the appliance frame
• Restores secure attachment to reduce vibration, noise, and movement
• Replaces stripped, missing, or corroded screws that prevent proper assembly
• Works wherever the OEM screw with this part number is specified

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not overtighten to avoid stripping threads or damaging parts
• Keep removed hardware organized and compare parts to the old screw for correct fit

This inner oven door glass restores the clear viewing window and helps contain heat inside the oven for even cooking. It replaces damaged or cracked inner glass so you can safely monitor food without opening the door. What it does:

• Forms the inner-facing glass layer in the oven door, keeping heat inside and protecting the oven cavity
• Allows safe, clear viewing of food while cooking without opening the door
• Replaces cracked, chipped, or clouded inner glass that can compromise visibility or safety
• Helps maintain the oven door's insulating integrity and consistent cooking temperatures

• One oven door inner glass panel as shown

• High-level: This part installs into the oven door assembly; door disassembly is typically required
• Safety-first: Disconnect power to the appliance before beginning work and allow the oven to cool completely
• Handle glass carefully to avoid breakage and wear cut-resistant gloves and eye protection

This oven temperature sensor probe monitors the interior temperature and sends readings to the range control for accurate cooking. Replacing a faulty sensor restores correct temperature regulation and more consistent bake/roast results. What it does:

• Senses oven cavity temperature and reports it to the control board
• Helps the oven reach and maintain set cooking temperatures
• Common symptom: oven not heating, running too hot or too cold, or uneven baking
• Works with the range/oven's electronic control to regulate heating cycles

• Disconnect power to the appliance before starting any repair
• Access typically requires removing the oven back panel or interior access panel; handle panels and fasteners carefully
• Do not bend the sensor sharply or damage the probe tip or wiring
• Ensure the sensor connector is fully seated and secured before restoring power; verify operation with a test heat cycle

This hot surface igniter glows to ignite the oven's bake burner, restoring consistent ignition so your oven can reach and hold the set temperature for baking and roasting. What it does:

• Heats until glowing hot to open the gas valve and ignite the oven bake burner
• Helps the oven reach set temperature and maintain steady baking heat
• Common symptom fixer: oven won't heat or takes too long to reach temperature
• Also used when the oven clicks or cycles without lighting

• Always disconnect power and shut off the gas supply before beginning work
• Avoid touching the ceramic/glowing element; handle by the mounting bracket or connector
• Verify proper wiring connection and secure mounting for reliable operation

This wiring harness connects refrigerator components to the main electrical system, restoring reliable power and signal paths so controls, lights, and accessories operate correctly. It's a direct-fit replacement designed for factory routing and connector types. What it does:

• Provides the electrical connections between control board and fridge components for proper operation
• Replaces damaged or corroded wiring that can cause intermittent power or component failure
• Helps resolve symptoms like lights or controls not working, intermittent operation, or certain accessories not powering on
• Maintains factory connector fit and routing to prevent loose or stressed connections

• One wiring harness assembly as pictured

• Disconnect all power to the appliance before starting work to avoid shock or damage
• Inspect connectors for damage; plug firmly into mating sockets until fully seated
• Route harness away from sharp edges, hinges and moving parts; secure with original clips or ties

This factory screw secures components in your appliance, restoring a tight, rattle-free fit. Replace missing or damaged hardware to keep panels, brackets, and trim properly fastened and aligned for safe, reliable operation.

• Secures panels, brackets, trim, or internal components to the chassis
• Replaces lost, rusty, stripped, or cross-threaded screws
• Helps eliminate looseness, gaps, and vibration/rattling
• Common signs: loose/misaligned panels or trim, rattling noises, missing or rounded screw heads

• Disconnect power (and shut off gas if applicable); allow the unit to cool completely
• Match to the original location and replace one at a time to maintain alignment
• Hand-start to prevent cross-threading; tighten snugly—do not overtighten
• Use light torque when threading into plastic or thin sheet metal

This replacement evaporator fan blade helps circulate cold air inside the freezer or refrigerator compartment to maintain even temperatures and proper cooling performance. A direct-fit replacement when the existing blade is cracked, warped, or missing. What it does:

• Moves air across the evaporator to promote even cooling and frost prevention
• Restores proper airflow when a damaged blade causes noise or reduced cooling
• Helps reduce hot or warm spots inside the compartment
• Quiet, balanced operation when installed correctly

• One replacement evaporator fan blade

• Disconnect power to the appliance before starting any repair
• Typically accessed by removing interior panels in the freezer/refrigerator compartment
• Inspect the fan motor shaft and mounting for damage before installing the new blade