Gdf570ssf22ss Parts

The Tine Block is an OEM component specifically designed for GE dishwashers. It refers to the horizontal arm that rotates during the wash cycle, hitting dishes with jets of water from hidden nozzles. Over many cycles of use, normal wear and tear can cause some degradation.

Causes of a bad tine block can include mineral and chemical buildup inside the nozzles over time, reducing water spray pressure.

Symptoms of a bad tine block include:  

• Poor water coverage of dishes failing to adequately rinse away soils
• Diminished cleaning performance as water pressure weakens
• Clogged or kinked supply hoses preventing consistent flow to nozzles

Replace yours today with this genuine GE OEM component to restore optimized washing. Proper spray coverage is needed to remove baked-on residues. This GE replacement part is compatible with Hotpoint, RCA, and select Kenmore models.

This control board clip secures the dishwasher's electronic control board to its mounting location, keeping it properly seated during operation. Replacing a damaged or missing clip helps prevent vibration, movement, and wire-connector strain.

• Holds the electronic control board firmly in its designated mount or housing
• Helps prevent board movement, rattling, and connector stress from vibration
• Replace if the clip is cracked, deformed, or missing
• Symptoms include a loose control assembly, rattling noises, or a board that won't stay seated

• Disconnect power at the breaker before servicing
• Access the control area; support the board when removing/installing the clip
• Handle the control board by the edges and observe ESD precautions
• Ensure the new clip is fully seated and the board is secure before reassembly

This top attachment strip secures the appliance's top panel and provides the mounting point for the door strike, restoring a stable, properly aligned front. It prevents panel movement and reduces rattles for a snug fit and reliable door engagement. What it does:

• Secures the top/front panel to the cabinet to maintain alignment and fit
• Serves as the mounting point for the door strike or latch components
• Helps eliminate rattling, vibration, and gaps at the top of the door area
• Restores reliable door engagement and prevents the strike from shifting

• Disconnect power to the appliance before beginning any repair
• Remove the top panel or access screws to reach the attachment strip; a screwdriver set is typically required
• Handle mounting tabs and edges carefully to avoid bending or damage
• Verify alignment of the door strike and test door closure after installation

This drain pump hanger secures the washer's drain pump to the outer tub, keeping the pump and hoses aligned so the pump can remove water reliably. Use it to replace a cracked or broken support that lets the pump shift. What it does

• Holds the drain pump firmly in place and maintains proper pump alignment.
• Helps reduce pump vibration and noise from a loose or mispositioned pump.
• Prevents the pump from pulling on hoses or becoming dislodged during the spin/drain cycle.
• A worn or broken hanger can contribute to poor draining, intermittent drainage, or unusual pump noise.

• One drain pump hanger.

• Disconnect power to the washer before beginning any repair.
• Access typically via the washer's lower front or rear panel; follow for disassembly.
• Inspect and reuse mounting hardware and grommets if undamaged; replace if corroded or broken.

This control box bottom is the lower housing that protects and supports the appliance's control electronics, helping keep wiring and components secure from debris and moisture. Fits into the control assembly to restore proper enclosure and support. What it does:

• Provides a protective lower enclosure for the control board and wiring harness
• Helps keep dust, lint and moisture away from sensitive electronics
• Secures the control board and related connectors in their correct position
• Prevents rattling or movement that can cause loose connections or noise

• One control box bottom (base cover) as pictured

• Disconnect power before servicing to avoid shock or component damage
• Handle electronics carefully and avoid touching circuit contacts
• Installation typically requires basic hand tools and removal of the control housing

This silverware basket assembly sits in the lower rack to organize and secure flatware during the wash cycle, promoting thorough cleaning while keeping small items from slipping loose and potentially causing noise or damage.

• Holds and separates utensils in the lower rack for better spray coverage
• Replaces a cracked, warped, damaged, or missing basket
• Helps prevent utensils from falling through and obstructing moving parts
• Common signs it's needed: broken/missing sections, sharp edges, utensils not staying upright or falling out

• No tools required; pull out the lower rack to access the basket
• Lift out the old basket and place the new one in the same position
• Ensure the basket sits flat and does not interfere with the lower spray arm
• Let the dishwasher cool before handling near the lower rack or heater

The Filter Adapter is an OEM component specifically designed for GE dishwashers. Located inside the dishwasher tub, it functions to strain out large food particles from water before it reaches the wash arms.  The adapter holds the removable wash/rinse filters in place during operation, functioning as an extension of the filtration system. 

Causes of a bad filter adapter can include cracks or breaks compromising its sealing surface, wear and tear deforming filter retention features over time, or buildup inhibiting functionality.

Symptoms of a bad filter adapter include:  

• Loose or falling out removable filters during washing  
• Bypassing of food particles around compromised seals
• Reduced lifespan of disposable filters placed in a faulty adapter
• Debris accumulation impacting spray arm performance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This Outer Door Service Assembly is an OEM part for GE dishwashers. It forms the external part of the dishwasher door, providing both a protective and aesthetic function. Ensuring that the door closes securely to prevent water leaks and maintain optimal operating conditions.

The need for a replacement outer door service assembly can arise from physical damage, wear over time, or aesthetic degradation. A compromised outer door can lead to operational issues and impact the appearance of the appliance.

Symptoms of a faulty  Outer Door Service Assembly include:

• Difficulty in closing or securing the dishwasher door.
• Visible dents, scratches, or wear that diminish the appearance and functionality.
• Water leakage or poor sealing during operation.
• Misalignment affects the overall operation of the dishwasher.
• Unusual noises or resistance when opening or closing the door.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This wiring harness assembly connects DC-powered components to the appliance's control system, restoring reliable electrical and signal paths for proper operation. It replaces a damaged or worn harness so circuits can function safely. What it does:

• Routes power and signal connections between the control board and DC-driven components
• Provides secure, keyed connectors to prevent mis-mating and intermittent contacts
• Helps stop failures caused by frayed wires, broken terminals, or melted insulation
• Common symptom fixes: appliance won't start or runs intermittently, loss of motor power, or electrical error codes

• Disconnect power to the appliance before beginning any service
• Inspect connectors and wire routing; replace if insulation or terminals are damaged
• Route and secure the harness per OEM routing to avoid heat and abrasion

This insulation toe kick is a replacement panel that fits the refrigerator base to help block drafts and protect internal components under the cabinet. It restores the factory barrier that supports temperature stability and efficient operation. What it does

• Replaces damaged or missing toe-kick insulation that lets cold air escape beneath the appliance
• Helps reduce drafts and minimize warm air intrusion into the refrigerator cavity
• Protects wiring and components located in the toe-kick area from dust and debris
• Can help prevent uneven cooling or frost buildup that results from compromised base insulation

• One insulation toe kick panel

• Disconnect power to the appliance before starting any service
• Remove the existing toe kick/board and fasteners, then position the replacement so mounting tabs align with factory slots
• Avoid compressing or tearing the insulation; maintain original fit for proper performance

The User Control and Display Board is an OEM part for GE dishwashers. It provides a user-friendly experience, displaying information and options for the washing cycles. It features buttons, lights, and a digital display to provide clear feedback and control over your dishwasher's operation.

A bad User Control and Display Board can lead to issues such as unresponsive buttons, flickering lights, or incorrect display readings. Causes of a bad User Control and Display Board can include electrical failures, wear and tear over time, or damage due to moisture or power surges.

Symptoms of a bad User Control and Display Board include:

• Unresponsive or non-functioning buttons on the control panel
• Flickering or dim lights on the display
• Incorrect display readings
• Inability to select or change cycle settings

Replace your faulty or damaged User Control and Display Board with this genuine OEM GE part to regain control over your dishwasher's function. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This shield wash pump circulates dishwasher wash water so dishes get cleaned and rinsed effectively. Replaces a failed or noisy pump to restore normal wash performance and water movement inside the tub. What it does:

• Circulates wash and rinse water through the spray arms for proper cleaning and rinsing
• Helps maintain consistent water flow and pressure during the wash cycle
• Reduces loud noise or grinding when a worn pump or motor is replaced
• Commonly replaced when the dishwasher pauses mid-cycle, won't complete cycles, or leaks from the pump area

• One complete shield wash pump assembly (pump with motor and mounting shield as shown)

• Recommended for users comfortable with appliance disassembly; disconnect power and water before starting
• Inspect seals and mounting gaskets and replace if worn to prevent leaks
• Tighten hose clamps and check hose routing during reassembly to avoid kinks or stress

This is a replacement upper rack for your dishwasher that holds cups, glasses, and small dishes while allowing proper spray coverage for cleaning. It restores secure top-rack loading and proper item spacing. What it does:

• Supports cups, glasses, bowls and other top-rack items for normal wash cycles
• Keeps items elevated for even water and detergent distribution
• Replaces bent, cracked, or rusted racks that allow dishes to shift or block spray arms
• Works with existing upper-rack slides and rollers when components are intact

• Disconnect power to the dishwasher and open the door fully before beginning
• Remove dishes and slide the old upper rack out along its rails; lift out per your model's rail release method
• Position the new rack on the rails and verify smooth forward/back travel; reinstall any retaining clips or stops
• If rollers, rails, or clips are damaged, replace those parts as needed for proper operation