Gdfe10pgj2bb Parts

This coarse plastic filter is a replacement strainer that helps keep large debris out of the appliance's water path, protecting internal valves and pumps and helping maintain proper water flow. What it does:

• Catches large particles and sediment before they reach valves, hoses or pumps
• Helps reduce debris-related flow restrictions that can cause poor fill or drain performance
• Reduces the chance of valve damage or clogging from large contaminants
• Commonly replaced when debris is visible or when water flow is noticeably reduced

• One coarse plastic filter/strainer

• Turn off power and water supply before starting any repair
• Access location and removal steps vary by model; follow the parts diagram
• Inspect and clean the housing before installing the new filter; rinse the filter under running water
• Ensure the filter is seated correctly and check for leaks after restoring power and water

This light shield is a molded plastic diffuser that protects and disperses the interior appliance light for clearer, gentler illumination. It replaces damaged or missing shields to keep the bulb covered and light evenly distributed. What it does:

• Covers and protects the interior light bulb from contact with food, spills, and debris
• Diffuses and softens the bulb output for more even interior lighting
• Helps prevent direct glare from the bulb and reduces hot spots
• Common symptom: cracked, melted, missing, or rattling shield that exposes the bulb

• One light shield

• Disconnect power to the appliance before attempting replacement
• Remove bulb carefully to access and seat the shield; avoid excessive force
• Use only the exact replacement part designed for your model to ensure proper fit
• If the existing mounting clips or brackets are damaged, replace them before reinstalling the shield

The Door Cable and Spring Kit is an OEM part for GE dishwashers. This kit includes the necessary cables and springs that connect to the dishwasher door, allowing it to open and close smoothly and securely. The components work together to provide the right tension and balance, preventing the door from falling open too quickly or not staying closed properly.

Common causes of a bad door cable and spring include wear and tear from regular use, accidental damage, or corrosion over time. When these components fail, the door may become difficult to operate or unsafe.

Symptoms of a bad Door Cable and Spring Kit include:

• The dishwasher door falling open too quickly
• The door not staying closed securely
• Difficulty in opening or closing the door
• Unusual noises when operating the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dishwasher fill funnel guides water flow into the appropriate channel, helping ensure proper distribution during wash cycles. Replacing a warped or damaged funnel can prevent leaks and restore consistent spray performance.

• Directs water into the dishwasher's internal water feed path
• Helps maintain correct water pressure for spray arms
• Common failure signs: leaking at the funnel area, poor spray performance, residue on dishes, or misalignment with the water feed tube
• Physical damage, warping, or a loose fit are typical replacement indicators

• Disconnect power and turn off water supply before servicing
• Access from inside the tub; remove any retaining screws or clips
• Inspect and reuse existing hardware/seals if still in good condition
• After installation, run a short cycle and check for leaks or misalignment

The Wash Pump Kit is an OEM component specifically designed for GE dishwashers. The wash pump works diligently during cycles to circulate water containing detergent throughout the dishwasher, providing optimal cleaning. 

Causes of a bad wash pump can include mineral buildup in pump components due to hard water, worn seals or bearings from continuous use, or damage from foreign objects in dishes obstructing the pump.

Symptoms of a bad Wash Pump Kit include:

• Dishes not getting fully cleaned after cycles  
• Standing water remaining in the bottom of the dishwasher
• Strange noises or vibrations coming from the pump area
• Error messages related to water detection or draining issues

Replace yours today with this genuine OEM GE part for reliable water circulation during each cycle. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

A replacement gray control panel assembly that restores the appliance's user interface and appearance. Designed to replace a damaged or worn panel so buttons and displays sit properly and the unit looks finished. What it does:

• Provides the exterior housing and mounting surface for control buttons, knobs or touchpads.
• Restores proper alignment and protection for the control electronics and display area.
• Addresses symptoms like cracked or broken panel, loose or misaligned controls, or cosmetic damage.
• Helps eliminate debris entry around controls that can cause sticking or intermittent input.

• Disconnect power to the appliance before starting any repair.
• Some installations require removal of trim, bezels, or fasteners; keep all screws and small parts.
• Handle the panel and any attached display components carefully to avoid scratches or damage.
• If control buttons, overlays, or electronic modules are not pre-attached, transfer them from the old panel.

This rubber grommet provides a protective seal where hoses, wires or components pass through openings, helping prevent chafing and moisture intrusion. Use it to restore a tight fit and reduce wear at the penetration point. What it does:

• Seals and cushions openings to help prevent water leaks and air gaps.
• Protects wiring and hoses from rubbing on sharp metal edges that can cause wear or shorts.
• Reduces vibration and rattling by holding parts securely in place.
• Common symptoms of failure: visible cracking, missing or torn grommet, water dripping near the opening, or rubbing noises.

• Disconnect power to the appliance and turn off water supply before beginning any repair.
• Remove the access panel or boot as needed to reach the opening; press the grommet into the hole until fully seated.
• Inspect surrounding seals, hoses and wiring; replace any damaged components to prevent repeat issues.

This manual floor plate is the replacement cover that mounts at the appliance base to protect internal components and provide a finished surface. It restores the dryer's base appearance and helps prevent debris from entering the cabinet. What it does:

• Covers and protects the lower cabinet opening and components from dust and lint
• Helps maintain proper clearance and a finished look at the dryer base
• Replaces damaged, bent, or missing base plates that allow debris entry
• Can reduce rattles or vibration caused by a loose or warped floor plate

• One floor plate

• Disconnect power (and gas, if applicable) before servicing to avoid shock or injury
• Remove the dryer front or lower access panel per manufacturer instructions to access mounting screws
• Use correct-size screws and tighten to manufacturer torque; avoid over-bending the plate during installation