Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replaces worn, cracked, or missing side trims along the dishwasher tub opening. Restores a clean finish and allows the door to open smoothly.
Googled common items for a leaking GE dishwasher (only five years old!). After pulling out the dishwasher it was clear it was the inflow valve. Went to AppliancePartsPros.com website, entered the model number, looked at the exploded diagram and found the part. Also purchased a trim package. In less than 24 hours I received the parts, installed them, and had the appliance back in order. Elated over part delivery and cost! Read more
Fix inconsistent water pressure or interrupted spray in your dishwasher. This four-port diverter directs water flow through cycles. Includes disc and magnet.
Secure your dishwasher to the underside of countertops with this screw and button plug kit. Replace stripped, missing, or damaged fasteners.
Order parts from Appliance Parts Pros. Read more
Dishwasher not dispensing detergent or dishes coming out dirty? This detergent dispenser module controls detergent release timing during wash cycles.
The Filter Ball is an OEM replacement part for GE dishwashers. As a key internal filtration component, it helps trap and remove food soils and other residue from washing water to maintain hygienic cleanliness standards.
Causes of a bad filter ball can include worn filter mesh that no longer adequately strains soils or substances that pass through more readily over time.
Symptoms of a bad filter ball include:
This GE replacement filter ball is also compatible with some Hotpoint, RCA, and Kenmore dishwashers.
Replaced sump and related pieces. Also replaced door baffles that were getting bad. The hardest part of job was removing the dishwasher from the its spot in cabinets. The info on site made replacing parts easy. Read more
The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.
Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.
Symptoms of a compromised screw placement include:
This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The replacement of the arm took a total of 3 minutes, all I needed was a nut driver for the easy job, taking the old arm out and putting the new one in, exact replacement , I appreciate you getting the part out as fast as you did. It took an extra day because of the ice storm we had . That was ok. Thanks you . Read more
Replacement door spring for dishwashers. Provides tension to help the door open and close smoothly. Replace if broken, worn, or door won't stay open.
I ordered the parts from AppliancePartsPros.com and they had everything I needed to do the repairs. The parts order was filled accurately and arrived quickly. The repairs only took me approx. 20 minutes. I know who carries the parts that I may need for future appliance repairs now. I put AppliancePartsPros.com in my favorites on my PC. Reasonable prices, good inventory and quick shipping, Appliance Parts Pros gets an A+++++ Thanks, DW Read more
Fix a dishwasher door that won't close properly or falls open with this door pulley cable. Works with internal springs to balance door movement.
I called to order the part. Exceptional, knowledgeable service, fast delivery. Read more
Coarse filter screen traps food debris and soil in your dishwasher's sump. Replace when clogged or cracked to maintain wash performance. Verify fit.
Changed the water pressure sensor Read more
Door hinge pulley for dishwashers. Works with springs and cables to balance door movement. Replace if cracked, broken, or causing uneven door operation.
I was able to slide the washer out of the cabinet to access the the cable. I installed the end of the cable on the spring the put the other end of the cable onto the door. The parts fit perfectly and the project was accomplished in a short time. Read more
Fixes water backing up into dishwasher after cycle ends. This check valve prevents backflow through the drain system. Requires tilting unit.
Removed kick plate , slowly took my time to diagnose area where intermittent noise coming from sump area. Could feel when the circulation pump was running it was quiet. When the drain cycle occurred the noise momentarily began. Ordered a drain pump. After removing the old one I discovered a broken tooth pick in the drain impeller area. Replaced the drain pump anyway. All is quiet!! Read more
Duct that connects the dishwasher door vent system. Replace if cracked, broken, or causing leaks inside the door. Installs between vent and cover.
Upon taking the door apart it looked like the leak was coming from the vent so I replaced the vent cap, vent seal and the transition piece. I did not have to change the seals. It took me a while to figure out how to get the door apart, but once I did, it was fairly straightforward. Read more
Counterbalances your dishwasher door for smooth opening and prevents sudden dropping or slamming. Replace if fatigued, broken, or missing.
Once I located the parts involved in the factory exploded drawing I ordered a cable and spring. Then, when I had the dishwasher pulled out I saw that both cables had simply slipped off of their pulleys and that the door needed to be re-set properly into its drop-down metal studs. So now I have a spare set for any problems in the future! Very easy - two screws under the counter and pull forward. Shipping was quick and easy. First time customer. Read more
The Inner Door Panel is an OEM part for GE dishwashers. It serves as the inner lining of the dishwasher door, ensuring a watertight seal and supporting components like the detergent dispenser and vent assembly.
Common causes of a bad inner door panel include wear and tear from regular use, exposure to high temperatures and harsh detergents, or physical impacts that cause cracks or warping.
Symptoms of a bad Inner Door Panel include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
The Hub is an OEM replacement part for GE dishwashers. It is the central mechanism which attaches to the tub and facilitates rotation of the upper spray arm above dishes.
Causes of a bad hub include wear from years of repeated rotation, accumulation of hard water scale deposits inside moving parts, or accidental impact damage. This reduces proper function over time.
Symptoms of a bad hub include:
This OEM GE hub replacement is also compatible with Crosley, and KitchenAid models.
Replace your dishwasher's sump overmold and gaskets when you notice leaks or water pooling. This kit restores the tub seal. Confirm fit with your model.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.