Gdwt368vooss Parts

Specs: 8-18 va trt 7/16

A self-tapping 10-24 x 1/2" screw used to secure appliance panels and internal components. Simple replacement to restore proper fastening and stop rattles or loose parts. What it does:

• Fastens panels, brackets, and small assemblies where a 10-24 tapped hole or nut is required
• Replaces missing or stripped screws that cause loose or vibrating panels
• Restores proper alignment and secure mounting of controls and trim
• Works in metal or reinforced plastic mating surfaces designed for 10-24 threads

• Unplug or disconnect power before accessing internal components
• Use the correct size driver (Phillips/hex depending on head) and start straight to avoid cross-threading
• Tighten until secure; avoid over-torquing which can strip threads or damage parts

This replacement model selector plug assembly connects to the appliance control to provide the factory configuration/jumper connection. Restores the intended electrical link so the control registers the correct configuration and options. What it does:

• Provides the factory-configured jumper/selector connection for the control board
• Ensures the control reads the proper configuration settings during startup
• Can cause configuration-related errors, control unresponsiveness, or incorrect option availability when faulty
• Matches the OEM part number to maintain original fit and function

• Disconnect power to the appliance before beginning any repair to avoid shock
• Handle connector pins carefully; align and seat the plug fully without forcing
• Do not modify the plug or control board terminals; replace only with the correct OEM part

 The Upper Arm Spray Assembly is an OEM part for GE dishwashers. It is responsible for distributing water evenly throughout the dishwasher during the cleaning cycle, ensuring all dishes are thoroughly cleaned. The arm measures approximately 11 inches long.

You should replace the upper arm spray assembly if it becomes clogged, damaged, or worn out. Causes of a bad spray assembly can include mineral buildup from hard water, food particles blocking the spray holes, or physical damage such as cracks or breaks.

Symptoms of a bad upper arm spray assembly include:

• Poor cleaning performance, with dishes coming out dirty
• Uneven water distribution inside the dishwasher
• Visible cracks or blockages in the spray arm
• Unusual noises during the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Upper Spray Arm Bearing is an OEM part for GE dishwashers. It supports the upper spray arm, allowing it to rotate smoothly and distribute water evenly throughout the dishwasher. This ensures that all dishes receive a thorough cleaning during each cycle.

Over time, the upper spray arm bearing can wear out or become damaged. Causes of a bad bearing can include repeated use, mineral buildup from hard water, or physical damage due to mishandling.

Symptoms of a bad Upper Spray Arm Bearing include:

• The upper spray arm not rotating properly
• Ineffective cleaning of dishes on the upper rack
• Unusual noises during the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Gasket Spring is an OEM part for GE dishwashers. It plays a crucial role in maintaining a tight seal around the dishwasher door, ensuring that water does not leak during operation. This spring helps keep the door gasket in place, providing a reliable and consistent seal.

Over time, the gasket spring can wear out, lose tension, or become damaged due to repeated use and exposure to the dishwasher’s high temperatures and moisture. A faulty spring can compromise the effectiveness of the door gasket, leading to potential leaks and inefficient washing cycles.

Symptoms of a bad gasket spring include:

• Water leaking from the dishwasher door
• Difficulty closing or latching the dishwasher door securely
• Reduced cleaning performance due to improper sealing

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Flood Switch Assembly is an OEM part for GE dishwashers. This part detects water levels and prevent overfilling by shutting off the water supply if a potential flood condition is detected. 

Causes of a bad flood switch assembly can include electrical failures, wear and tear over time, or damage from water exposure. 

Symptoms of a bad flood switch assembly include:

• The dishwasher not filling with water properly
• The dishwasher overfilling or leaking
• Error codes related to water levels
• The dishwasher not starting or stopping mid-cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Dishwasher rack tine clip. Used to hold the tines in place within the rack. Color: gray. Measures about 1 inch wide by 1 inch high by 1-1/2 inches deep.

This dishwasher flood switch seal sits around the flood/leak switch to create a watertight barrier at the switch opening. Replacing a cracked or flattened seal helps stop under-unit drips and keeps leak detection working properly.

• Forms a watertight seal where the flood switch mounts
• Helps prevent water from entering the base pan
• Common signs include water under the unit or visible wear on the old seal

• Disconnect power and shut off the water supply before servicing
• Remove the toe-kick; pull the unit forward if needed to access the flood switch
• Release the flood switch, remove the old seal, and seat the new seal evenly—do not overtighten
• Reassemble and run a short fill/rinse while checking closely for leaks