Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This upper drawer slide assembly supports and guides a refrigerator bin beneath its shelf. Replacing a cracked or worn slide restores smooth, aligned drawer movement so the bin opens and closes easily without binding or sagging.
Clear flip-up cover for the door-mounted dairy compartment. Replaces cracked, broken, or missing dairy doors to restore a clean look and keep items secure.
It took more time to find the correct part than it did to make the repair. I took the Dairy Shelf out of the refrigerator door by lifting it up about 1 inch and pulling it out. The Dairy Door has two round tabs on it, one on each side, that fit into round cut-outs on the Dairy Shelf. I lined up the new Dairy Door with the Dairy Shelf to determine which side is up and fit the Dairy Door tabs into the Dairy Shelf slots and finally into the round cut-outs. I had to deflect the plastic Dairy... Read more
8-18 CA HX 1/2 S
Replacement went good. The fan was perfect match. I am glad I ordered the two grommets, because the other ones were worn. I found this when dismantling. The blade was replaced as well. Read more
SCR solid-state switching module that controls power flow in refrigerator circuits. Replace when module is damaged, burned out, or failing to switch properly.
Replaced solenoid and flap as per instructions on site. Fast, easy and working great! Thanks Read more
Secures the hinge cover to your refrigerator door or cabinet hinge. Replace this screw if it's missing, stripped, or damaged to stop the cover from loosening.
Found the parts on this website and installed them. I was actually quite happy since there is a diagram of the door and I could go piece-by-piece to order what I needed. Read more
Hex washer head screw for refrigerator component mounting. Replaces missing, stripped, or damaged fasteners on brackets, panels, and covers.
Mounting standoff spacer secures internal components, panels, and circuit boards inside your refrigerator. Replace if cracked, broken, or missing.
Since the compressor was still working, I guessed that either the interior fan was bad or the main control board. Since fans are usually very reliable, I decided to replaced the main control board. Immediately after replacing the board, the refrigerator began working normally. Thank goodness that solved the problem because replacing the board is much easier that replacing the fan on my refrigerator. Read more
A replacement module shelf assembly that supports and secures a refrigerator's electronic control module and wiring inside the cabinet, helping maintain proper component position and reduce vibration-related connection issues. What it does:
After the initial price shock at GE's website. I searched further and found all the parts at significant savings and they are Orem parts at appliancepartspro.com. Using the make and model number, I easily ordered the needed parts. They arrived within 48 hours and job is complete except for one part which is on back order. Rate this an easy fix. Read more
Refrigerator not cooling or running constantly? A damaged condenser coil prevents proper heat release. This assembly restores cooling efficiency.
Size: 8-32 t. Includes 12 screws.
Replacement mounting screw for refrigerator brackets, panels, and handles. Restores secure fit when original fastener is missing, stripped, or damaged.
Replaces a cracked, broken, or worn ice bin flip lid that won't stay open or close properly. Installs over the ice storage area to keep ice covered.
Replacing the mullion was easy. Just a few screws at the top and bottom of the door. There is an electrical cord attached to the bottom of the mullion, but the connection to the door electronics is a simple quick disconnect. Be careful pulling it out. Replacing the bin cover is a little more involved. Must remove the bottom bin and both vegetable bins. Then the shelf above the bin can be removed and replaced. (Terrible design requires the entire shelf to be replaced when a tab for the bin... Read more
Guides airflow across the condenser and secures the fan motor in place. Replace if cracked, broken, or missing to restore proper cooling airflow.
Secures water tubing to fittings in refrigerators and dishwashers. Replace if leaking, tubing slips off, or clamp is cracked. Confirm fit with model number.
When moving a "Scratch & Dent" Ref we broke the coupling on the back for the water line. We purchased new and repaired ourselves! Read more
Small cushioning bumper for French-door refrigerators. Prevents door rattling and protects against wear. Replace if cracked, missing, or worn out.
Fastens panels, brackets, and trim to appliance cabinets. Replace this screw when the original is missing, stripped, or damaged during service work.