Gfd45essmww Parts

This rear level leg bracket replaces the rear mounting bracket that secures a leveling leg to the appliance frame, restoring proper support and helping keep the appliance stable and level for safe, quiet operation. What it does:

• Secures the rear leveling leg to the appliance frame so the cabinet sits evenly
• Restores proper height and prevents the appliance from tilting backward
• Reduces rocking, wobbling, and vibration caused by a damaged or loose bracket
• Helps maintain safe, stable operation under normal load conditions

• Disconnect power (and gas supply if applicable) and move the appliance to a safe, accessible area before starting.
• Support the appliance cabinet so it cannot tip when the rear leg or bracket is removed.
• Use basic hand tools to remove and install the bracket; follow the appliance manufacturer's instructions.
• Inspect the leveling leg and front mounts while servicing; replace any worn or damaged hardware.

The Water Valve is an OEM part for GE electric dryers. Located near the bottom of the machine, it controls water flow into the condenser system during moisture-sensing cycles.

The moisture sensing function uses this valve to introduce precise amounts of water vapor into the exhaust air stream periodically. This allows the condenser to capture moisture readings accurately and determine optimal cycle time based on humidity levels. 

Causes of failure include mineral buildup restricting flow, worn seals enabling leaks, or misaligned internal components hindering valve movement.

Symptoms of a faulty water valve are: 

• Loss of moisture sensing ability
• Incomplete or improper readings affecting cycle times  
• Water leaks from the valve area
• Failure to inject water vapor as needed

This part is also compatible with some Kenmore models using GE components.

This steam kit is the OEM steam generator assembly that supplies steam for steam-refresh and wrinkle-care cycles. It restores the appliance's ability to produce steam for improved fabric care and odor removal. What it does

• Heats and releases water as steam into the drum during steam cycles to help relax wrinkles and freshen clothes.
• Addresses weak or no-steam symptoms when the dryer runs steam cycles but garments remain untreated.
• Works with the appliance's control system to deliver steam only during designated cycle phases.
• Helps reduce the need for ironing by loosening fabric fibers during the cycle.

• One steam generator assembly (steam kit) as shown.

• Disconnect power before starting any repair to avoid shock or flooding.
• Suitable for technicians or experienced DIYers; follow the appliance service manual for disassembly and routing of water/steam lines.
• Inspect and replace any brittle or cracked tubing and seals to prevent leaks; test for proper steam delivery after installation.
• Do not operate the dryer with missing or damaged panels; ensure all connectors are secure.

This plastic screw plug covers and protects unused screw holes on appliance panels for a clean, finished look while helping keep out dirt and moisture. Simple replacement to restore appearance and prevent debris buildup. What it does:

• Covers exposed screw holes in trim or panels to improve appearance
• Helps block dust and light debris from entering through openings
• Prevents accidental contact with recessed screws
• Useful when replacing panels or removing components where plugs were lost

• One plastic screw plug

• Disconnect power or unplug the appliance before accessing internal panels when necessary
• Press the plug into the hole by hand; use a flat tool gently if alignment is tight
• Do not force or hammer the plug to avoid panel damage
• Replace any damaged surrounding trim before installing plug for a secure fit

The Control Board is an OEM part for GE dryers. As the central electronics module, it regulates all dryer functions and operations during cycles. The control board receives input from temperature sensors and buttons to distribute power accordingly.

Causes of a bad control board often involve water damage, electrical faults that arise over many uses, or physical impacts. Over time, component failures or short circuits can disrupt the board's ability to operate the dryer properly.

Symptoms of a bad control board include:

• The dryer failing to start or functioning unpredictably
• Display/button malfunctions where settings cannot be accessed  
• Inability to progress through an entire cycle
• Erratic stopping, starting, and hanging behaviors

This OEM GE replacement control board restores full and safe functionality to the dryer. It ensures cycles run accurately as the user intends once more. This part is compatible with some Hotpoint, RCA, and Kenmore dryer models.

This door guide aligns and supports the dryer door as it closes so the strike engages the catch cleanly. Replacing a damaged or missing guide restores smooth, secure latching and reduces gaps that can affect drying performance.

• Guides the door into position for proper latch engagement
• Helps maintain door alignment to prevent gaps, rubbing, or rattling
• Addresses issues like difficulty closing, door popping open, or misalignment
• Direct replacement for a worn, cracked, or missing guide

• Disconnect power to the dryer before servicing
• Open the door and remove the screws or clips securing the existing guide
• Position the new guide and fasten with the original hardware
• Test door operation to ensure smooth latching and proper alignment

This felt strip lines the lint filter opening. It helps seal the lint screen to reduce lint bypass and air leaks, supporting proper airflow and consistent drying performance. What it does:

• Creates a soft, protective seal around the lint filter opening
• Helps direct airflow through the lint screen to capture lint effectively
• Reduces lint bypass into the exhaust path or cabinet
• Common symptoms of a worn or missing felt: longer dry times, lint beyond the filter, visible gaps, or a loose-fitting lint screen

• 1 filter felt strip

• Disconnect power; turn off gas supply to gas dryers before servicing
• Remove the lint filter and access the filter grille/housing as your model requires
• Remove old felt and residue; position the new felt and secure per your model's design (some use adhesive)
• Reassemble and verify the lint filter seats flush without gaps

This motor support is the stamped metal bracket that secures the dryer motor and blower assembly, keeping components aligned for smooth operation. It restores proper motor mounting and reduces noise from loose or misaligned parts. What it does:

• Holds the dryer motor and blower housing in the correct position to prevent wobble or misalignment
• Helps maintain proper blower alignment for effective air movement
• Supports safe, reliable motor operation when the original bracket is bent, cracked, or worn

• Disconnect power (unplug electric or shut off gas and breaker) before beginning repair
• Access requires opening the dryer cabinet and removing the drum and/or front panel on many models
• Inspect related components (motor mounts, blower wheel, idler, belt) and replace if damaged

The Control Panel Assembly is an OEM part for GE electric clothes dryers. Located at the front of the dryer, it encompasses the digital displays, push buttons, and wiring harness connecting all electronic functions. 

As the core command module of the appliance, the panel facilitates cycle selection and monitoring of settings. Its surface-mounted circuit board receives input from buttons to direct dryer operations through output signals. 

Causes of failure involve water exposure leading to circuit corrosion, excessive impact events like dropped tools potentially cracking components, or typical wear over 10+ years of continual use.

Symptoms of a bad control panel assembly include:

• Non-responsive or incorrectly responsive buttons
• Failed or blank digital readouts  
• Improper cycle sequences despite functioning elements
• Occasional internal electrical connection issues

Replacing with the OEM GE assembly restores the control center and interactive interface. This ensures dependable dryer programming and reliable touch control feedback. Compatible with some Kenmore dryer.

This plastic flat drive belt transmits motion between components to enable proper operation of the appliance. It replaces a worn or broken belt to restore consistent movement and reduce slipping. What it does

• Transfers rotational force from a motor or gearbox to driven parts to power operation
• Restores normal movement when a belt is cracked, stretched, or broken
• Helps eliminate slipping, uneven operation, or intermittent cycles caused by belt failure
• Used where a molded or flat plastic belt is specified instead of a rubber V-belt

• One replacement plastic flat drive belt as shown

• Install only when the appliance is unplugged or the circuit is powered off to avoid shock or injury
• Inspect pulleys, idlers, and related parts for wear and replace if damaged to prevent premature belt failure