Ghwn5250dows Parts

The Drain Pump Inlet Hose is an OEM part for GE washing machines. This hose plays a crucial role in the laundry process, ensuring that used water is efficiently removed from the washer, which helps in preventing standing water, odors, and potential mold growth inside the appliance.  

Causes for issues with the drain pump inlet hose often involve natural wear and tear from constant exposure to water and laundry chemicals, physical damage from overloading or moving the washer, or blockages from lint, small garments, or other debris.

Symptoms of a malfunctioning Drain Pump Inlet Hose include:

• Water leaking from the bottom or back of the washing machine
• Slower than normal drain times, indicating possible clogs
• Visible wear, cracks, or damage to the hose

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Rod and Spring is an OEM part for GE washing machines. This part stabilizes the washer tub, reducing vibrations, and maintaining balance during the wash and spin cycles. 

Causes of a bad rod and spring can include wear and tear from frequent use, corrosion from exposure to moisture, and physical damage from overloading the washer or accidental impacts. 

Symptoms of a bad rod and spring include:

• Excessive shaking or vibrating during wash or spin cycles
• Loud banging or knocking noises during operation
• The washer tub being off-balance or misaligned
• Visible wear, rust, or damage to the rod or spring

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Fabric Softener Dispenser is an OEM replacement part for GE washers. It is located on the top of the agitator. This dispenser allows for easy addition of fabric softener or other washing aids at the ideal time in the cycle. With a simple twist and pour into the reservoir, it then evenly releases the solution to condition clothes during the final rinse.

Causes of a bad dispenser can include cracks or leaks allowing premature discharge into the wash drum. Mineral buildup may also clog the release nozzles.

Symptoms of a bad dispenser include:

• Fabric softener not fully dispensing or splashing outside the dispenser cup
• Stains or residue transferring onto clothes from residues
• Strong chemical smells if the contents extra release early

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lid Switch Magnet is an OEM part for GE washing machines. This magnet interacts with the lid switch to signal that the washer lid is closed, allowing the washing cycle to begin.

Causes of a bad lid switch magnet can include wear and tear from frequent use, physical damage, or loss of magnetism over time. A malfunctioning magnet can prevent the washer from detecting a closed lid, thereby interrupting the wash cycle.

Symptoms of a bad Lid Switch Magnet include:

• Washer not starting or stopping mid-cycle
• Error codes indicating lid issues
• Washer not spinning or agitating
• Lid lock mechanism not engaging

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The GE screw is an OEM replacement part responsible for securing various components or parts together on a washing machine. Its main function is to connect and hold together various parts, panels, or brackets, ensuring that they remain securely in place during the appliance's operation. The screw comes in the size 1/4-20 MCH HXW 5/8 S, indicating its thread size, head type, and length.

This part fixes the following symptoms:

• Loose or wobbly components on the washing machine
• Difficulty in assembling or disassembling parts due to missing or faulty screws
• Certain parts becoming detached or separating during use
• The washing machine vibrating excessively during use
• Doors, panels, or knobs not staying securely in place

The GE washing machine screw can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This shaft and tube assembly supports and drives the washer's inner basket during the spin cycle. Replacing a worn or bent assembly restores smooth rotation and helps reduce noise, vibration, and basket wobble.

• Supports and centers the inner tub for stable spinning
• Provides the rotating drive surface that turns the basket in spin
• Works with the washer's drive system to deliver spin power
• Common symptoms: no or weak spin, scraping/grinding noises, excessive vibration, or basket wobble

• Disconnect power and water supply before servicing; wear gloves and eye protection
• Access typically requires removing the top/console, agitator or wash plate, inner basket, and retaining hardware
• Inspect related parts and replace if worn or leaking during reassembly
• After installation, level the washer and run a spin test to check for proper operation and leaks

The Screw is an OEM part for GE appliances, commonly used in washing machines, dryers, and other household appliances. This screw is designed to secure various components, ensuring they remain properly aligned and fastened during operation. Its precise design and durable construction are tailored to meet the specific requirements of GE appliances.

Over time, screws can become damaged or lost due to regular use, vibration, or during maintenance and repair activities. A missing or damaged screw can lead to loose parts, affecting the overall functionality and safety of the appliance.

Symptoms of a bad or missing screw include:

• Loose or rattling components
• Misalignment of parts
• Noise during operation
• Parts or panels not staying securely in place

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Funnel Shower Head Assembly is an OEM replacement part for GE washers. This assembly includes the shower head and mounting bracket that delivers water directly to the load for optimal cleaning. 

Causes of a bad shower head assembly can include mineral buildup or obstructions in the spray nozzles, cracks or damage to the plastic shower head itself, or a loose or faulty connection to the washer water inlet.  

Symptoms of a bad shower head assembly include:

• Inadequate or uneven water spray distribution during the wash cycle 
• Leaks or drips from the shower head area
• Reduced cleaning performance 

This replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Suspension Rod Support is an OEM part for GE washing machines. This part maintains the stability of the washing machine's drum by supporting the suspension rods, which help absorb vibrations and shocks during operation.

Causes of a bad suspension rod support can include wear and tear from regular use, corrosion due to exposure to moisture, or physical damage from overloading the washer.

Symptoms of a bad suspension rod support include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging noises
• The washer moving or "walking" during operation
• The drum being off-balance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Lid Assembly is an OEM part for GE washing machines. This part is the lid of the washer. It is essential for securely covering the washer drum, preventing water from splashing out during the wash cycle, and allowing safe operation by ensuring the washer does not run with the lid open.

Causes of a bad lid assembly can include general wear and tear, physical damage from heavy loads or impacts, or issues with the hinges or latch mechanisms.

Symptoms of a bad lid assembly include:

• Difficulty in opening or closing the lid
• Washer not starting or stopping mid-cycle due to a faulty lid switch
• Visible cracks or damage on the lid
• Water leaking from the top of the washer

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The anti-siphon clip secures the washer's drain hose to a standpipe or laundry tub, maintaining the proper air gap to prevent siphoning and backflow. It keeps the hose stable so the washer fills and drains as intended.

• Maintains an air break at the drain to help stop unintended siphoning
• Holds the drain hose securely to a standpipe or sink/tub
• Helps prevent "filling and draining at the same time" or low water levels
• Helps keep the hose from vibrating loose or popping out during cycles

• Unplug the appliance and shut off water before starting
• Route the drain hose per the installation manual; avoid kinks or submerging the hose end
• Snap the clip onto the hose and fasten it to the standpipe or tub edge
• Run a quick test to verify no leaks and correct hose position

The Tub Dampening Strap Retainer is an OEM part for GE washing machines. This part holds the tub dampening straps in place, which help to stabilize the washing machine tub during operation.  

Causes of a bad retainer can include regular wear and tear, physical damage from heavy loads or impacts, and degradation over time. 

Symptoms of a bad tub dampening strap retainer include:

• Excessive vibration or shaking during wash cycles
• Increased noise levels during operation
• The washing machine moving or becoming unbalanced during use
• Visible damage or wear on the retainer or straps

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

A replacement baffle screw and flat washer used to secure the baffle or trim piece in ovens and ranges. Restores proper attachment to reduce vibration and keep the baffle aligned for normal operation. What it does

• Secures the baffle or trim to the oven/range body and prevents movement or rattling.
• Replaces missing, stripped, or corroded mounting hardware that can cause loose or misaligned baffles.
• Helps maintain a tight fit so trim and baffle sit flush with surrounding panels.
• Small, direct-replacement fastener for original baffle mounting points.

• Disconnect power and allow the appliance to cool before accessing internal panels.
• Use the matching size screwdriver; start threads by hand to avoid cross-threading.
• Tighten until snug — avoid over-tightening, which can strip threads or deform the washer.
• Repair or replace the mounting bracket before installing this hardware.

This flood hose gasket seals the joint where the washer's flood/overflow hose connects to the outer tub. A fresh seal helps stop seepage from the tub area, preventing drips or moisture around the top or rear of the washer.

• Creates a watertight seal at the flood/overflow hose connection to the outer tub
• Helps prevent leaks during fill, wash, and spin
• Typical failure signs: drips from the top/back of the tub, visible cracks or deformation, or a loose hose connection

• Disconnect power and turn off water supply before servicing
• Access the flood hose connection at the tub; remove the hose and old gasket
• Seat the new gasket fully and reconnect the hose securely
• Run a short cycle to check for leaks

This drive pulley mounts to the washer basket shaft and routes the belt from the motor to spin the drum. Replacing a worn pulley can stop squeal and belt slippage and help restore smooth, reliable spin performance.

• Transfers motor power via the belt to rotate the wash basket during spin
• Keeps the belt tracking correctly; damage can cause squealing, fraying, or slippage
• Typical symptoms: no or slow spin, belt repeatedly coming off, grinding/squealing noises, burning rubber smell, or visible pulley wobble

• Disconnect power and water before servicing; pull the unit forward for access
• Remove the rear panel to access the belt and pulley
• Slip off the belt, remove the center fastener, and replace the pulley
• Reinstall the belt on the grooves; verify alignment by hand-rotating the drum before testing

This hose clamp kit secures the washer's hoses at the pump, tub, or valve connections, helping stop leaks and hose blow-offs. Replace worn or missing clamps to restore a tight, reliable seal during fill, wash, and drain.

• Secures drain, pump, and fill hoses to fittings to maintain a watertight seal
• Helps prevent drips, leaks, and hoses slipping off during vibration
• Replaces clamps that are rusted, stripped, deformed, or missing
• Common symptoms: water leaking at hose joints, loose hose connections, clamp won't tighten
• Useful when installing a new hose, pump, or valve

• Unplug the washer and turn off water supplies; have towels or a pan ready for residual water
• Release and remove old clamps; seat the hose fully over the fitting before installing new clamps
• Tighten evenly and do not overtighten to avoid hose or fitting damage
• Restore power and water, then run a short cycle to check for leaks at each connection