Gie22jsnbrr Parts

A top door hinge and pin assembly that supports the refrigerator/freezer door and lets it pivot smoothly for reliable opening and closing. Replaces a worn or damaged top hinge to restore proper door alignment and seal. What it does:

• Provides a durable pivot point so the door swings open and closed smoothly
• Restores proper door alignment to help the gasket seat and maintain cooling
• Stops squeaks, sticking, or uneven door movement caused by a worn hinge
• Supports the door weight to prevent sagging or dragging

• One hinge top and pin assembly

• Disconnect power to the appliance before starting work and keep stored food safe
• Remove items from the door and support the door while replacing the hinge (two people may be needed)
• Retain any mounting screws; replace only parts explicitly shown in OEM documentation

A small plastic thimble that fits behind a push-style control button to hold it squarely in the housing and restore smooth button travel. Replaces a worn or missing retainer to improve button feel and alignment. What it does:

• Secures push-style control buttons in the panel to stop wobble or uneven movement
• Restores proper button travel so controls depress and release cleanly
• Helps keep the button centered in its bezel for consistent operation
• Addresses symptoms like buttons that fall out, sit crooked, or don't return smoothly

• Disconnect power to the appliance before beginning any repair
• Remove the knob or access the control panel per your model's service instructions
• Press the thimble into the button housing until it snaps or seats fully; then reinstall the button/knob

Specs: 8-32 ca hxw 1/2

This metal compressor mounting clip secures the refrigerator compressor to the base, helping keep the unit stable and reducing vibration transfer. Replaces a worn or broken clip to restore proper compressor alignment and quieter operation. What it does:

• Secures the compressor to the cabinet/base to prevent movement during operation and transport
• Helps reduce vibration and rattling that can indicate a loose or damaged mount
• Keeps the compressor aligned so refrigerant lines and mounting hardware remain correctly positioned
• Useful when the original clip is bent, cracked, or missing

• One compressor mounting clip

• Disconnect power to the appliance before beginning any repair
• Support the compressor before removing or installing the clip to avoid strain on lines or fittings
• Use appropriate hand tools; avoid over-tightening fasteners which can cause damage
• Replace rubber grommets or insulation if present and damaged for best vibration isolation

The Ice Bucket is an OEM part for GE refrigerators. It is a component that stores ice from the icemaker in the freezer compartment. The ice bucket allows for convenient access to ice on demand, fitting seamlessly within the refrigerator design.

Symptoms of a bad ice bucket include:

• Cracks or damage to the plastic material
• Inability to easily remove or insert the bucket  
• Ice falling out of the bucket improperly
• Missing parts like the handle

Note: This is just the ice bucket. It does not include other ice maker components.

Replace your worn ice bucket before further issues arise like ice spilling in the freezer. This OEM GE part restores your refrigerator’s storage and access to ice. It is also compatible with Hotpoint, RCA, and Kenmore refrigerators.
 

The Capacitor is an OEM component specifically designed for GE refrigerators with bottom-mount freezers. Located inside near the compressor unit, it aids in powering the refrigerator system during startup.

Causes of a bad capacitor include normal wear from thousands of startup cycles. Exposure to moisture or fluctuating voltages over many years can diminish performance.

Symptoms of a failing capacitor include:

• Inconsistent cooling or inability to lower temperatures
• Buzzing or humming noises from inside the fridge 
• Repeatedly tripping the power breaker 

Replacing with this genuine GE capacitor restores reliable operation. Compatible with GE bottom-freezer models, it features reliable aluminum electrolytic construction. Backed by GE quality, this replacement ensures smooth powering of the compressor for efficient cooling cycles. Compatible replacements are also available for GE Profile and GE Cafe series refrigerators.
 

The Defrost Heater Assembly is an OEM replacement part for GE refrigerators. This assembly is responsible for preventing the buildup of ice and frost on the evaporator coils by providing controlled heat during the defrost cycle. It helps prevent ice accumulation that can hinder the refrigerator's ability to cool properly.

A bad defrost heater assembly can occur due to electrical issues, component failure, or damage to the heating element. If you notice symptoms such as excessive frost or ice buildup in the freezer compartment, inconsistent cooling, or water leaking from the refrigerator, it may indicate a need to replace the defrost heater assembly.

Symptoms of a bad defrost heater assembly include:

• Excessive frost or ice buildup in the freezer compartment
• Inconsistent cooling
• Water leaking from the refrigerator

Restore your refrigerator by replacing the faulty defrost heater assembly with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This compressor start kit provides the overload protector and PTCR starting device used to help refrigerator compressors start and protect against electrical overloads. It replaces failed start components to restore reliable compressor starting. What it does:

• Supplies a PTCR (positive temperature coefficient resistor) starter to give the compressor the initial starting boost.
• Includes an overload protector that helps prevent compressor damage from electrical overload or overheating.
• Common symptom linkage: may be needed when the compressor hums but won't start, the fridge cycles without cooling, or the compressor repeatedly clicks/trips.
• Works with compressors that use separate PTCR and overload start components.

• Disconnect power to the appliance at the breaker or unplug before servicing.
• Installed at the compressor terminals; follow OEM wiring orientation and secure connections.
• Test compressor and start circuit after installation to confirm proper operation.

This genuine fastener secures appliance components such as panels and brackets. Replacing a missing or stripped screw restores proper fit and helps reduce vibration or rattling. Features 12-24 threads and an approximate 0.785-inch length. What it does:

• Fastens panels, brackets, covers, and other hardware points in the appliance
• Helps maintain proper alignment and a tight fit of components
• Replaces damaged, stripped, or missing hardware
• Common symptoms include loose or rattling parts and hardware that won't tighten

• One screw

• Disconnect power before servicing; shut off water supply if working near water components
• Start the screw by hand to avoid cross-threading; replace one-for-one in the original location
• Use the correct driver bit for the head style; tighten snugly without overtightening into plastic or thin metal

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This replacement refrigerator door stop cushions and limits door travel to help prevent slamming and misalignment. It restores smooth, controlled door movement and helps the door stay properly positioned for reliable sealing. What it does:

• Absorbs impact and reduces door slam noise when opening or closing
• Limits door travel to prevent over-rotation that can damage the cabinet or hinge
• Helps maintain proper door alignment for an effective seal
• Commonly used when a door slams, hangs open, or rubs against the cabinet

• Unplug the appliance or disconnect power before working near electrical components
• Support the door while removing or installing the stop to prevent it from shifting
• Use appropriate hand tools; do not force or overtighten fasteners

Front control housing replaces the appliance's front control console to restore appearance and provide a secure mounting surface for the control components. It helps keep buttons, knobs, and the control board properly aligned and protected. What it does:

• Houses and supports the control board, touchpad/buttons and display so controls stay securely mounted.
• Replaces cracked, warped or damaged console sections that cause loose or misaligned buttons.
• Restores proper button and dial alignment when physical damage prevents normal operation.
• Helps reduce exposure of internal control parts to dust and splashes from normal use.

• Disconnect power (unplug appliance or switch off circuit breaker) before beginning any work.
• Removal typically requires taking off the control panel and detaching wiring—handle ribbon cables and connectors gently.
• Use the correct screwdriver and hardware; avoid overtightening screws to prevent cracking the plastic.

This freezer door stop replaces the damaged or worn bumper that cushions the freezer door, helping it close smoothly and preventing damage to the door or cabinet. Color-matched Dorian Gray finish. What it does:

• Cushions door movement to reduce banging and wear
• Helps the door seal more consistently by providing proper stopping position
• Reduces noise when opening or closing the freezer door
• Restores original fit and finish for a clean, finished appearance

• Basic hand tools may be required; follow the appliance manufacturer's instructions
• Power off and empty the door area if required for safe access before installing
• Inspect surrounding trim and mounting area; replace mounting screws if worn or damaged