Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ordered parts, waited for them to arrive Took door apart, installed new parts Put door back together shut door (it stayed shut) Washed dishes, opened door (it opened) Dishes were clean (no water on floor) ALL DONE AND IT WORKS Read more
This was not an obvious source of a leak. The Tower Heater Assembly Nut developed a crack over time due to heat exposure. So the leak was gradual slowly getting worse over time. It was a hairline crack that ran down one of the edges of the nut making it hard to see. In talking to a pro he said it isn't a common problem. It is all the way in the back of the bottom of the dishwasher so it is not something you can see without pulling the dishwasher out and running it. The repair itself is easy. I... Read more
I bought a replacement turbidity sensor and swapped it out. Very simple and straightforward. However there is one trick to be know. When I pulled out the bad sensor, drain water spilled from the hole and trickled into the motherboard housing! I then had to pull out the board and check it for damage. I left it in front of a box fan for 5 hours just in case. All is well. Read more
When I identified a leak coming from the Heating Coil, I saw that the Heating Element Nut on both sides were corroded and could not hold the heating element tight any more. I ordered replacement parts and the fix was very easy. As I was running the test afterwards, I discovered that there was a leak coming from under the door. I realized then that the reason the heating element nut corroded was because of a leak in the door. I ordered a new door gasket and door seal (that goes at the bottom... Read more
Red
The Tine Row is an OEM part for Frigidaire dishwashers. It is designed for the left side tine row of your Frigidaire dishwasher. It is designed to hold and support dishes, glasses, and other items securely in the dishwasher rack. The tine row ensures that dishes are properly spaced and positioned for optimal cleaning and drying during the wash cycle.
Over time, tine rows can become damaged or worn out due to repeated use, heavy loads, or mishandling. Bending or breaking of the tines can occur, affecting the overall performance of the dishwasher and potentially causing damage to dishes.
Symptoms of a bad Tine Row include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Ordered new replacement tines from AppliancePartsPros.com. Just unsnapped the clips, removed the old rusted parts, and replaced them with the new parts I received. Read more
The Fine Filter Hub Nut is an OEM part for GE dishwashers. It secures the fine filter in place, ensuring that debris and food particles are effectively filtered out during the wash cycle, preventing them from re-entering the dishwasher tub.
Causes of a bad fine filter hub nut can include wear and tear from regular use, damage from over-tightening, or cracking due to impact. A faulty hub nut can lead to improper filtration, causing debris to circulate and potentially clog the dishwasher.
Symptoms of a bad Fine Filter Hub Nut include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more
The Interlock Switch Plunger is an OEM part for GE dishwashers. This component works with the door latch to ensure the dishwasher operates only when the door is securely closed, providing safety and preventing water leaks.
Over time, the interlock switch plunger can wear out or become damaged due to repeated use, mechanical stress, or debris buildup. Causes of a bad interlock switch plunger include frequent door openings and closings, misalignment of the door latch, and exposure to moisture.
Symptoms of a bad interlock switch plunger include:
First off OUTSTANDING experience with AppliancePartsPros.com! Ordered my parts on Tuesday and they arrived Wed morning!! Replaced interlock switch plunger and spring, which was obviously broken compared to the new one. This solved the problem of my door not latching but the machine would still not turn on. So with two interlock switches on the door, one had to be bad. So decided to start by replacing one switch at a time until I found the bad one. If both were bad I would just buy a... Read more
The Interlock Switch Cover is an OEM part for GE dishwashers. It is designed to protect the interlock switch, which ensures the dishwasher operates only when the door is securely closed.
Causes of a bad interlock switch cover can include wear and tear over time, accidental damage during loading or unloading, or exposure to moisture and detergent that can degrade the cover's material.
Symptoms of a bad Interlock Switch Cover include:
Replaced door switches and plunger , spring. Other than the switches I believe the top of the plunger had contact issues as the updated part had larger contact Read more
The Flood Switch Assembly is an OEM part for GE dishwashers. This part detects water levels and prevent overfilling by shutting off the water supply if a potential flood condition is detected.
Causes of a bad flood switch assembly can include electrical failures, wear and tear over time, or damage from water exposure.
Symptoms of a bad flood switch assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered a new flood switch and activation stem from Aplliance Parts Pros.com. Order was delivered in about 3 days. Installed new switch and stem in about 15 min. Removed front kicker panel with two screws, the switch was just inside the panel secured with two screws. remove the electrical connector, removed screws, replace the two new parts..put the screws back in place and ran the washer...no overflows. Read more
Color: blue-gray. It measures about 1-1/2 inches in diameter.
Ordered new part on website which arrived within two days - amazing !!! Truly thought we would be waiting for several weeks for replacement - awesome !!! Read more
Dishwasher overflowing or leaking from the door? A faulty float can cause overfill issues. This float controls water level and prevents flooding.
Thanks to appliancepartspros.com the dishwasher was able to be repaired quickly and under budget. I removed the motor pump assembly and replaced it. I was also able to change out the faulty flood switch and replace the seals to stop the leak. The appliance is once again good as new and ready to run a new load of dishes. Read more
The Cabinet Seal Kit is an OEM replacement part for Frigidaire dishwashers. It is a kit that includes all the necessary rubber seals and gaskets to make sure a proper seal around the dishwasher door. The cabinet seals are designed to prevent water leakage and contain moisture and debris within the dishwasher. Causes of bad seals can include normal wear and tear over time, exposure to cleaning chemicals or detergents that degrade rubber seals, or damage due to improper installation. Symptoms of bad seals include:
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
I watched the video provided on your site for the installation of the door seal. Once I got the part, it took me just a few seconds to remove the old and install the new part. Read more
Unscrew the sides and pull the dishwasher out and simple remove the old door hinges and put the new one in. Read more