Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Gld69664r30ss Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Lower Spray Arm Bearing
Genuine Ge part
By: Ge
Part Number: WD01X10107

This is a genuine OEM replacement lower spray arm bearing sourced directly from the manufacturer for use in dishwashers. The lower spray arm spins to distribute water to the dishes during the wash cycle. Thus spray arm bearing supports the spray arm and lessens the friction, which allows it to spin more easily. If the dishes are not clean after the wash and rinse cycle, or the arm is making loud noises, the spin arm bearing may need to be replaced. This bearing is a small metal part that may wear over time. If the bearing is distorted or damaged, the arm will not sit level, and spinning may be very loud, or it may not spin. The spray arm bearing should be replaced. Turn off the breaker or disconnect the power to the dishwasher. Open the dishwasher and pull the bottom rack out. Turn the lower spray arm counterclockwise to remove it. Use a telescoping magnet to pull the bearing up from the hole in the middle. Install the new bearing and reinstall the spray arm. Put the dishrack back inside and reconnect the power.This lower spray arm bearing is a gray metal part that is sold individually. It is designed for use in dishwashers designed by General Electric and Hotpoint.

This part fixes the following symptoms
  • Noisy
See more...
Do-It-Yourself Stories from Customers like You Leaking water onto the floor   John G. • Canmer , KY • May 28, 2015

The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more

More
Spring
Genuine Ge part
By: Ge
Part Number: WD03X10012

 

More
Trim Tub Flange Bk
Genuine Ge part
By: Ge
Part Number: WD08X10022

 

More
Gasket Fill Hole
Genuine Ge part
By: Ge
Part Number: WD08X10060

 

More
Vent
Genuine Ge part
By: Ge
Part Number: WD12X10045

 

Do-It-Yourself Stories from Customers like You The vent part was broken and woulkd not stay in its place and kept falling out the rinse aid cap was broken also and ended up falling on the he4ating element and burnt   Martha R. • Spring , TX • February 08, 2015

This was very simple. Thgey just popped back into place asnd the cap screws in. Read more

More
Conduit Spray Arm Mid
Genuine Ge part
By: Ge
Part Number: WD12X10052

 

Do-It-Yourself Stories from Customers like You Bottom rack was rusting out and the middle sprayer was not spinning   Charles B. • Rockwall , TX • July 29, 2016

Replaced the rack, the replacement was already fully assembled. Replacing the middle sprayer and assembly wasn't too bad. Read more

More
Conduit Carrier Mid
Genuine Ge part
By: Ge
Part Number: WD12X10054

 

Do-It-Yourself Stories from Customers like You Mddle spray arm not spinning   Nicholas M. • Titusville , NJ • October 24, 2018

Replaced all the related parts. Read more

More
Spray Arm Water Supply Tube
Genuine Ge part
By: Ge
Part Number: WD12X10057

 

Do-It-Yourself Stories from Customers like You Leaking water onto the floor   John G. • Canmer , KY • May 28, 2015

The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more

More
Bracket, Rinse Module (Mounting Bracket)
Genuine Ge part
By: Ge
Part Number: WD12X10146

This mounting bracket secures the dishwasher rinse module/dispenser assembly so the dispenser stays properly positioned for reliable rinse-aid delivery. A correctly seated bracket helps prevent dispenser misalignment and related rinse-aid issues. What it does:

  • Holds the rinse module/dispenser firmly in place inside the dishwasher tub or door
  • Keeps the dispenser aligned so rinse aid can be released as designed
  • Helps prevent dispenser rattling, shifting, or partial seating during cycles
  • Can reduce symptoms like poor rinsing, visible spots, or uneven rinse-aid release
What's included: One mounting bracket for the rinse module/dispenser. Install notes:
  • Disconnect power to the appliance before starting any work for safety
  • Basic hand tools (screwdriver, nut driver) are typically needed; follow OEM instructions
  • Align the bracket and secure fasteners without over-tightening to avoid damage

Do-It-Yourself Stories from Customers like You Soap suds left in tub after rinse cycle   John O. • White Plains , NY • May 20, 2017

Rinse aid was not dispensing properly. so replacing the dispenser fixed the problem. Very easy to do with the replacement part, although the repair video was not exactly accurate; it was actually easier. Remove the screws holding the door liner and lift it off, and the part is right in front of you. 6 screws off, remember what color wire goes where, reassemble, and you're done. Problem gone. As usual, Appliance Parts Pros is the absolute best source. Read more

More
Det Dispensing Asm
Genuine Ge part
By: Ge
Part Number: WD12X10251

 

Do-It-Yourself Stories from Customers like You Liquid detergent draining from smartdispense reservoir   John B. • Midland , TX • February 21, 2015

Very easy repair. Remove front door bottom panel (3 lowest screws from inside of door on left side and right side with #2 Philips screwdriver). Then remove 2 screws on bottom of door with socket set, I believe 1/4". I also used a mirror so I could see what I was doing. Remove cover and the detergent dispensing Asm has 2 screws to hold it down, a hose clamp to hold hose in place and a quick connect electrical connector. Just replace the part and re-install the door and that is it. Part # is... Read more

More
Pulley Bracket Asm
Genuine Ge part
By: Ge
Part Number: WD16X10009

 

More
Module Control Asm
Genuine Ge part
By: Ge
Part Number: WD21X10382

 

More
Coarse Filter
Genuine Ge part
By: Ge
Part Number: WD22X10029

 

Do-It-Yourself Stories from Customers like You Bottom coarse filter curled up in corners letting debris get through and clog the wash arms   Caroline F. • Oregon City , OR • August 22, 2016

I ordered a bottom coarse filter, which was easy to order through Appliance Parts Pros, received it sooner than expected, watch a u tube video on how to replace it and my dishwasher is running well. Read more

More
Hose Fill
Genuine Ge part
By: Ge
Part Number: WD24X10026

 

Do-It-Yourself Stories from Customers like You The water inlet valve leaked and caused floor damage   Nicholas C. • Granby , CT • August 22, 2016

Looked at your diagram and located the part replaced hose and clamps as a precaution Read more

More
Brace Toekick
Genuine Ge part
By: Ge
Part Number: WD27X10233

 

More
Dishwasher Dishrack Cup Shelf
Genuine Ge part
By: Ge
Part Number: WD28X10176

Replacement cup shelf for dishwasher dishrack. Installs on upper or lower rack to securely hold cups and small items. Needed when original is cracked or broken.

More
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store
​